Ok dmesg ready and is attached to email.
On 19.11.2013 10:15, Daniel Vetter wrote:
Please boot with drm.debug=0xe added to your kernel cmdline, reproduce
the issue and then attach the complete dmesg. Please make sure it
contains everything from boot-up.
Also _always_ cc relevant mailing lists when reporting an issue
-Daniel
On Tue, Nov 19, 2013 at 9:54 AM, Krzysztof Kolasa <kkolasa@xxxxxxxxxx> wrote:
[ 35.464081] ------------[ cut here ]------------
[ 35.464127] WARNING: CPU: 1 PID: 1155 at
drivers/gpu/drm/i915/intel_display.c:9262 check_crtc_state+0x289/0x360
[i915]()
[ 35.464129] pipe state doesn't match!
[ 35.464132] Modules linked in: pci_stub vboxpci(O) vboxnetadp(O)
vboxnetflt(O) vboxdrv(O) snd_hda_codec_si3054 snd_hda_codec_realtek joydev
8192cu(O) snd_hda_intel snd_hda_codec snd_hwdep snd_pcm usb_storage
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse serio_raw
lpc_ich snd_timer snd_seq_device mac_hid i915 snd drm_kms_helper bnep drm
rfcomm i2c_algo_bit soundcore bluetooth snd_page_alloc parport_pc video
ppdev lp parport 8139too 8139cp
[ 35.464176] CPU: 1 PID: 1155 Comm: Xorg Tainted: G W O
3.13.0-rc1-winsoft-pae #6
[ 35.464180] Hardware name: FUJITSU SIEMENS AMILO Pro Edition V3405
/AMILO Pro Edition V3405 , BIOS R01-B0E 03/20/2007
[ 35.464183] 00000000 00000000 f6eb1964 c15f6078 f893454c f6eb1994
c1041d24 f893e2ff
[ 35.464192] f6eb19c0 00000483 f893454c 0000242e f88e1549 f88e1549
f6818000 f681864c
[ 35.464201] 00000001 f6eb19ac c1041de3 00000009 f6eb19a4 f893e2ff
f6eb19c0 f6eb1c1c
[ 35.464210] Call Trace:
[ 35.464219] [<c15f6078>] dump_stack+0x41/0x52
[ 35.464227] [<c1041d24>] warn_slowpath_common+0x84/0xa0
[ 35.464258] [<f88e1549>] ? check_crtc_state+0x289/0x360 [i915]
[ 35.464288] [<f88e1549>] ? check_crtc_state+0x289/0x360 [i915]
[ 35.464293] [<c1041de3>] warn_slowpath_fmt+0x33/0x40
[ 35.464323] [<f88e1549>] check_crtc_state+0x289/0x360 [i915]
[ 35.464359] [<f88ec3e5>] intel_modeset_check_state+0x55/0x90 [i915]
[ 35.464389] [<f88ec454>] intel_set_mode+0x34/0x40 [i915]
[ 35.464419] [<f88ed28d>] intel_get_load_detect_pipe+0x21d/0x300 [i915]
[ 35.464458] [<f8911c85>] intel_tv_detect+0x125/0x230 [i915]
[ 35.464466] [<c111962b>] ? shmem_recalc_inode+0x7b/0xb0
[ 35.464476] [<f86ee0b0>]
drm_helper_probe_single_connector_modes+0x1d0/0x360 [drm_kms_helper]
[ 35.464503] [<f8752eec>] ? drm_mode_object_find+0x6c/0xb0 [drm]
[ 35.464525] [<f8756371>] drm_mode_getconnector+0x371/0x3a0 [drm]
[ 35.464544] [<f87488d8>] drm_ioctl+0x488/0x530 [drm]
[ 35.464552] [<c10526b3>] ? __set_current_blocked+0x33/0x50
[ 35.464573] [<f8756000>] ? drm_mode_getcrtc+0xc0/0xc0 [drm]
[ 35.464590] [<f8748450>] ? drm_free_buffer+0x30/0x30 [drm]
[ 35.464595] [<c1162bd2>] do_vfs_ioctl+0x72/0x2d0
[ 35.464601] [<c1162ec7>] SyS_ioctl+0x97/0xa0
[ 35.464606] [<c10024df>] ? sys_sigreturn+0x9f/0xb0
[ 35.464612] [<c16070c1>] sysenter_do_call+0x12/0x22
[ 35.464615] ---[ end trace 848bc934df119034 ]---
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc1-winsoft-pae (root@AMILO-V3405) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #6 SMP Tue Nov 19 08:32:22 CET 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f690000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU SIEMENS AMILO Pro Edition V3405 /AMILO Pro Edition V3405 , BIOS R01-B0E 03/20/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f690 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 2039M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f6770-0x000f677f] mapped at [c00f6770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x371fffff]
[ 0.000000] [mem 0x37000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x36ffffff]
[ 0.000000] [mem 0x34000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x37bfdfff]
[ 0.000000] [mem 0x37200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01acc000, 0x01accfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3723f000-0x37feffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3648e000-0x3723e891]
[ 0.000000] Move RAMDISK from [mem 0x3723f000-0x37fef891] to [mem 0x3648e000-0x3723e891]
[ 0.000000] ACPI: RSDP 000f6560 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 7f69241e 000048 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f697caa 000074 (v01 INTEL CALISTGA 06040000 LOHR 00000065)
[ 0.000000] ACPI: DSDT 7f693029 004C81 (v01 WS X40 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f698fc0 000040
[ 0.000000] ACPI: APIC 7f697d1e 000068 (v01 INTEL CALISTGA 06040000 LOHR 00000065)
[ 0.000000] ACPI: HPET 7f697d86 000038 (v01 INTEL CALISTGA 06040000 LOHR 00000065)
[ 0.000000] ACPI: MCFG 7f697dbe 00003C (v01 INTEL CALISTGA 06040000 LOHR 00000065)
[ 0.000000] ACPI: SLIC 7f697dfa 000176 (v01 FSC PC 06040000 PTL 00000001)
[ 0.000000] ACPI: APIC 7f697f70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f697fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f692e1f 00020A (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f692466 0004F6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1146MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01acd000, 0x01acdfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7f68ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7f68ffff]
[ 0.000000] On node 0 totalpages: 521774
[ 0.000000] free_area_init_node: node 0, pgdat c1905900, node_mem_map f549e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2294 pages used for memmap
[ 0.000000] HighMem zone: 293522 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd6000 s32776 r0 d24568 u57344
[ 0.000000] pcpu-alloc: s32776 r0 d24568 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519990
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-rc1-winsoft-pae root=UUID=ef74a35b-f5ab-41c4-80ad-6e174fb1d74d ro quiet splash drm.debug=0xe
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f690)
[ 0.000000] Memory: 2044660K/2087096K available (6176K kernel code, 550K rwdata, 2568K rodata, 772K init, 888K bss, 42436K reserved, 1174088K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1916000 - 0xc19d7000 ( 772 kB)
[ 0.000000] .data : 0xc1608593 - 0xc1915a40 (3125 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1608593 (6177 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.243 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.48 BogoMIPS (lpj=6384972)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004062] Security Framework initialized
[ 0.004081] AppArmor: AppArmor initialized
[ 0.004186] Mount-cache hash table entries: 512
[ 0.004603] Initializing cgroup subsys devices
[ 0.004611] Initializing cgroup subsys freezer
[ 0.004615] Initializing cgroup subsys blkio
[ 0.004619] Initializing cgroup subsys perf_event
[ 0.004662] Disabled fast string operations
[ 0.004669] CPU: Physical Processor ID: 0
[ 0.004672] CPU: Processor Core ID: 0
[ 0.004677] mce: CPU supports 6 MCE banks
[ 0.004690] CPU0: Thermal monitoring enabled (TM2)
[ 0.004709] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.004709] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.004709] tlb_flushall_shift: 6
[ 0.004919] Freeing SMP alternatives memory: 24K (c19d7000 - c19dd000)
[ 0.004923] ACPI: Core revision 20130927
[ 0.012674] ACPI: All ACPI Tables successfully acquired
[ 0.016013] ftrace: allocating 28635 entries in 56 pages
[ 0.032141] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036183] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076132] smpboot: CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz (fam: 06, model: 0e, stepping: 08)
[ 0.080000] Performance Events: Core events, core PMU driver.
[ 0.080000] ... version: 1
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 0000000000000003
[ 0.080000] CPU 1 irqstacks, hard=f74e2000 soft=f74e4000
[ 0.080000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.089078] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] .... node #0, CPUs: #1
[ 0.091178] x86: Booted up 1 node, 2 CPUs
[ 0.091183] smpboot: Total of 2 processors activated (6384.97 BogoMIPS)
[ 0.096114] devtmpfs: initialized
[ 0.096362] EVM: security.selinux
[ 0.096364] EVM: security.SMACK64
[ 0.096367] EVM: security.capability
[ 0.096391] PM: Registering ACPI NVS region [mem 0x7f690000-0x7f6fffff] (458752 bytes)
[ 0.098152] regulator-dummy: no parameters
[ 0.098201] RTC time: 9:24:43, date: 11/19/13
[ 0.098267] NET: Registered protocol family 16
[ 0.098522] EISA bus registered
[ 0.098526] cpuidle: using governor ladder
[ 0.098528] cpuidle: using governor menu
[ 0.098528] ACPI: bus type PCI registered
[ 0.098528] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098528] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098528] PCI: Using MMCONFIG for extended config space
[ 0.098528] PCI: Using configuration type 1 for base access
[ 0.100119] bio: create slab <bio-0> at 0
[ 0.100119] ACPI: Added _OSI(Module Device)
[ 0.100119] ACPI: Added _OSI(Processor Device)
[ 0.100119] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100119] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.106460] ACPI: SSDT 7f692bac 0001EA (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.106852] ACPI: Dynamic OEM Table Load:
[ 0.106856] ACPI: SSDT (null) 0001EA (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.106985] ACPI: SSDT 7f69295c 0001CB (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.107357] ACPI: Dynamic OEM Table Load:
[ 0.107361] ACPI: SSDT (null) 0001CB (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.107689] ACPI: SSDT 7f692d96 000089 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.108072] ACPI: Dynamic OEM Table Load:
[ 0.108076] ACPI: SSDT (null) 000089 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.108186] ACPI: SSDT 7f692b27 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.108555] ACPI: Dynamic OEM Table Load:
[ 0.108559] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.112145] ACPI: Interpreter enabled
[ 0.112165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130927/hwxface-580)
[ 0.112172] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130927/hwxface-580)
[ 0.112194] ACPI: (supports S0 S3 S4 S5)
[ 0.112197] ACPI: Using IOAPIC for interrupt routing
[ 0.112237] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.112408] ACPI: No dock devices found.
[ 0.125753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125763] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125773] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.126603] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.126608] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.126612] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.126616] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.126620] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.126624] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.126629] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.126632] PCI: root bus 00: using default resources
[ 0.126683] PCI host bridge to bus 0000:00
[ 0.126688] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.126692] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.126696] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.126713] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.126881] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.126898] pci 0000:00:02.0: reg 0x10: [mem 0xd8100000-0xd817ffff]
[ 0.126907] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.126916] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.126925] pci 0000:00:02.0: reg 0x1c: [mem 0xd8200000-0xd823ffff]
[ 0.127084] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.127097] pci 0000:00:02.1: reg 0x10: [mem 0xd8180000-0xd81fffff]
[ 0.127316] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.127343] pci 0000:00:1b.0: reg 0x10: [mem 0xd8240000-0xd8243fff 64bit]
[ 0.127455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.127547] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.127610] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.127671] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.127819] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.127879] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.128032] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.128094] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.128242] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.128303] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.128466] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.128494] pci 0000:00:1d.7: reg 0x10: [mem 0xd8444000-0xd84443ff]
[ 0.128610] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.128751] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.128958] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.129082] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.129091] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.129099] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1200 (mask 0007)
[ 0.129268] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.129288] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.129302] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.129316] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.129330] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.129344] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.129502] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.129530] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7]
[ 0.129545] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7]
[ 0.129559] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf]
[ 0.129573] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3]
[ 0.129587] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.129601] pci 0000:00:1f.2: reg 0x24: [mem 0xd8444400-0xd84447ff]
[ 0.129664] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.129802] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.129881] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 0.130123] pci 0000:0a:07.0: [10ec:8139] type 00 class 0x020000
[ 0.130152] pci 0000:0a:07.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.130169] pci 0000:0a:07.0: reg 0x14: [mem 0xd8000000-0xd80000ff]
[ 0.130278] pci 0000:0a:07.0: supports D1 D2
[ 0.130282] pci 0000:0a:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.130312] pci 0000:0a:07.0: System wakeup disabled by ACPI
[ 0.130409] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.130417] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.130424] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.130434] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.130438] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.130451] pci_bus 0000:00: on NUMA node 0
[ 0.131252] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *7
[ 0.131347] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *3
[ 0.131439] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.131530] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 0.131620] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.131715] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *4
[ 0.131806] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.131898] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *5
[ 0.132572] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 0.132584] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.132646] Found 1 acpi root devices
[ 0.132736] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.132818] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132818] vgaarb: loaded
[ 0.132818] vgaarb: bridge control possible 0000:00:02.0
[ 0.132818] SCSI subsystem initialized
[ 0.132818] libata version 3.00 loaded.
[ 0.132818] ACPI: bus type USB registered
[ 0.132818] usbcore: registered new interface driver usbfs
[ 0.132818] usbcore: registered new interface driver hub
[ 0.132818] usbcore: registered new device driver usb
[ 0.132818] PCI: Using ACPI for IRQ routing
[ 0.145935] PCI: pci_cache_line_size set to 64 bytes
[ 0.145995] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.145999] e820: reserve RAM buffer [mem 0x7f690000-0x7fffffff]
[ 0.146151] NetLabel: Initializing
[ 0.146154] NetLabel: domain hash size = 128
[ 0.146156] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.146175] NetLabel: unlabeled traffic allowed by default
[ 0.146196] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.146196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.146196] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.148028] Switched to clocksource hpet
[ 0.159747] AppArmor: AppArmor Filesystem Enabled
[ 0.159792] pnp: PnP ACPI init
[ 0.159820] ACPI: bus type PNP registered
[ 0.159997] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.160003] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.160032] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.160037] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.160041] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.160046] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.160050] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.160055] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.160062] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161937] pnp 00:01: [dma 4]
[ 0.161993] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.162044] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.162200] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.162206] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.162281] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.162366] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.162371] system 00:05: [io 0x1000-0x107f] could not be reserved
[ 0.162376] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.162380] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.162385] system 00:05: [io 0x1200-0x120f] has been reserved
[ 0.162390] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162483] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.162488] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.162493] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162552] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.162614] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.162684] pnp 00:09: Plug and Play ACPI device, IDs SYN0301 SYN0300 SYN0002 PNP0f13 (active)
[ 0.162715] pnp: PnP ACPI: found 10 devices
[ 0.162717] ACPI: bus type PNP unregistered
[ 0.162722] PnPBIOS: Disabled by ACPI PNP
[ 0.201363] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.201370] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.201377] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.201385] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.201399] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.201404] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.201408] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
[ 0.201412] pci_bus 0000:0a: resource 1 [mem 0xd8000000-0xd80fffff]
[ 0.201415] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.201419] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[ 0.201470] NET: Registered protocol family 2
[ 0.201725] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.201758] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.201811] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.201852] TCP: reno registered
[ 0.201857] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201872] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201960] NET: Registered protocol family 1
[ 0.201983] pci 0000:00:02.0: Boot video device
[ 0.203687] PCI: CLS 64 bytes, default 64
[ 0.203767] Trying to unpack rootfs image as initramfs...
[ 0.673233] Freeing initrd memory: 14020K (f648e000 - f723f000)
[ 0.673402] Simple Boot Flag at 0x36 set to 0x1
[ 0.673582] Scanning for low memory corruption every 60 seconds
[ 0.674077] audit: initializing netlink socket (disabled)
[ 0.674100] type=2000 audit(1384853083.672:1): initialized
[ 0.719139] bounce pool size: 64 pages
[ 0.719147] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.721783] VFS: Disk quotas dquot_6.5.2
[ 0.721869] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.722650] fuse init (API version 7.22)
[ 0.722821] msgmni has been set to 1727
[ 0.723591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.723652] io scheduler noop registered
[ 0.723655] io scheduler deadline registered
[ 0.723707] io scheduler cfq registered (default)
[ 0.723852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.723879] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.723991] intel_idle: does not run on family 6 model 14
[ 0.725191] ACPI: AC Adapter [ADP1] (on-line)
[ 0.725311] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.726493] ACPI: Lid Switch [LID0]
[ 0.726566] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.726573] ACPI: Sleep Button [SLPB]
[ 0.727051] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.727071] ACPI: acpi_idle registered with cpuidle
[ 0.736930] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.736938] ACPI: Thermal Zone [TZS0] (43 C)
[ 0.743241] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.743248] ACPI: Thermal Zone [TZS1] (50 C)
[ 0.743325] GHES: HEST is not enabled!
[ 0.743365] isapnp: Scanning for PnP cards...
[ 1.097826] isapnp: No Plug & Play device found
[ 1.097950] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.101524] Linux agpgart interface v0.103
[ 1.101610] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.101677] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.102353] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.102592] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.105667] brd: module loaded
[ 1.107265] loop: module loaded
[ 1.107506] ahci 0000:00:1f.2: version 3.0
[ 1.107775] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.107874] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.107881] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.108736] scsi0 : ahci
[ 1.108910] scsi1 : ahci
[ 1.109071] scsi2 : ahci
[ 1.109229] scsi3 : ahci
[ 1.109316] ata1: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444500 irq 40
[ 1.109319] ata2: DUMMY
[ 1.109323] ata3: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444600 irq 40
[ 1.109325] ata4: DUMMY
[ 1.109435] ata_piix 0000:00:1f.1: version 2.13
[ 1.110538] scsi4 : ata_piix
[ 1.110674] scsi5 : ata_piix
[ 1.110741] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.110745] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.111271] libphy: Fixed MDIO Bus: probed
[ 1.111299] tun: Universal TUN/TAP device driver, 1.6
[ 1.111302] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 1.111400] PPP generic driver version 2.4.2
[ 1.111594] ata6: port disabled--ignoring
[ 1.111680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.111683] ehci-pci: EHCI PCI platform driver
[ 1.111894] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.111983] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.112032] ehci-pci 0000:00:1d.7: debug port 1
[ 1.115948] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.115974] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd8444000
[ 1.124078] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.124483] hub 1-0:1.0: USB hub found
[ 1.124497] hub 1-0:1.0: 8 ports detected
[ 1.124796] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.124800] ohci-pci: OHCI PCI platform driver
[ 1.124817] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.125027] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.125128] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.125160] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.125405] hub 2-0:1.0: USB hub found
[ 1.125417] hub 2-0:1.0: 2 ports detected
[ 1.125718] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.125811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.125857] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.126100] hub 3-0:1.0: USB hub found
[ 1.126112] hub 3-0:1.0: 2 ports detected
[ 1.126414] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.126513] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.126559] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.126802] hub 4-0:1.0: USB hub found
[ 1.126814] hub 4-0:1.0: 2 ports detected
[ 1.127112] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.127204] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.127249] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.127507] hub 5-0:1.0: USB hub found
[ 1.127519] hub 5-0:1.0: 2 ports detected
[ 1.127725] usbcore: registered new interface driver usbserial
[ 1.127739] usbcore: registered new interface driver usbserial_generic
[ 1.127754] usbserial: USB Serial support registered for generic
[ 1.127772] usbcore: registered new interface driver pl2303
[ 1.127782] usbserial: USB Serial support registered for pl2303
[ 1.127859] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.128369] i8042: Detected active multiplexing controller, rev 1.1
[ 1.128487] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.128498] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.128540] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.128580] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.128617] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.128861] mousedev: PS/2 mouse device common for all mice
[ 1.129170] rtc_cmos 00:07: RTC can wake from S4
[ 1.129391] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.129430] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.129547] device-mapper: uevent: version 1.0.3
[ 1.129684] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 1.129712] platform eisa.0: Probing EISA bus 0
[ 1.129755] platform eisa.0: EISA: Detected 0 cards
[ 1.129772] cpufreq-nforce2: No nForce2 chipset.
[ 1.129925] TCP: cubic registered
[ 1.130111] NET: Registered protocol family 10
[ 1.130436] NET: Registered protocol family 17
[ 1.130464] Key type dns_resolver registered
[ 1.130753] Using IPI No-Shortcut mode
[ 1.131010] registered taskstats version 1
[ 1.131988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.135009] Key type trusted registered
[ 1.138011] Key type encrypted registered
[ 1.140996] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.141345] Magic number: 5:785:424
[ 1.141504] rtc_cmos 00:07: setting system clock to 2013-11-19 09:24:44 UTC (1384853084)
[ 1.141858] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.141860] EDD information not available.
[ 1.141926] PM: Hibernation image not present or could not be loaded.
[ 1.272492] ata5.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AJ10, max UDMA/33
[ 1.288690] ata5.00: configured for UDMA/33
[ 1.302272] ACPI: Battery Slot [BAT0] (battery present)
[ 1.428165] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.432161] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.436102] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.443133] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.443911] ata1.00: ATA-8: OCZ-VERTEX3, 2.25, max UDMA/133
[ 1.443916] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.453120] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.453804] ata1.00: configured for UDMA/133
[ 1.454054] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.25 PQ: 0 ANSI: 5
[ 1.454256] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.454299] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.454357] sd 0:0:0:0: [sda] Write Protect is off
[ 1.454362] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.454418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.455942] scsi 4:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AJ10 PQ: 0 ANSI: 5
[ 1.456475] sda: sda1 sda2 sda3
[ 1.457121] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.464670] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.464674] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.464856] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.465004] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.465571] Freeing unused kernel memory: 772K (c1916000 - c19d7000)
[ 1.465658] Write protecting the kernel text: 6180k
[ 1.465776] Write protecting the kernel read-only data: 2572k
[ 1.465779] NX-protecting the kernel data: 4060k
[ 1.488191] udevd[103]: starting version 175
[ 1.623878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.631944] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.631981] 8139cp 0000:0a:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.649189] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.650415] 8139too 0000:0a:07.0 eth0: RealTek RTL8139 at 0x00014000, 00:0a:e4:b8:71:b4, IRQ 23
[ 1.688242] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.954328] random: init urandom read with 69 bits of entropy available
[ 2.020721] init: ureadahead main process (260) terminated with status 5
[ 2.149848] Adding 4882808k swap on /dev/sda3. Priority:-1 extents:1 across:4882808k SS
[ 2.181690] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.252381] udevd[359]: starting version 175
[ 2.341249] lp: driver loaded but no devices found
[ 2.526482] ppdev: user-space parallel port driver
[ 2.555563] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.565203] Bluetooth: Core ver 2.17
[ 2.565268] NET: Registered protocol family 31
[ 2.565271] Bluetooth: HCI device and connection manager initialized
[ 2.565282] Bluetooth: HCI socket layer initialized
[ 2.565287] Bluetooth: L2CAP socket layer initialized
[ 2.565296] Bluetooth: SCO socket layer initialized
[ 2.587626] Bluetooth: RFCOMM TTY layer initialized
[ 2.587645] Bluetooth: RFCOMM socket layer initialized
[ 2.587654] Bluetooth: RFCOMM ver 1.11
[ 2.596280] type=1400 audit(1384853085.954:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=508 comm="apparmor_parser"
[ 2.596292] type=1400 audit(1384853085.954:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=508 comm="apparmor_parser"
[ 2.597472] type=1400 audit(1384853085.954:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=508 comm="apparmor_parser"
[ 2.604989] type=1400 audit(1384853085.962:5): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=519 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2.627626] random: nonblocking pool is initialized
[ 2.629663] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.676722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.676729] Bluetooth: BNEP filters: protocol multicast
[ 2.676745] Bluetooth: BNEP socket layer initialized
[ 2.702237] intel_rng: FWH not detected
[ 2.731422] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130927/utaddress-251)
[ 2.731437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.731443] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130927/utaddress-251)
[ 2.731449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.731452] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130927/utaddress-251)
[ 2.731458] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.731461] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.732624] [drm] Initialized drm 1.1.0 20060810
[ 2.734857] leds_ss4200: no LED devices found
[ 2.845836] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[ 2.845947] [drm:intel_detect_pch], No PCH found?
[ 2.845955] [drm] Memory usable by graphics device = 256M
[ 2.845968] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 2.845972] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[ 2.859005] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[ 2.859013] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[ 2.859053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.859056] [drm] Driver supports precise vblank timestamp query.
[ 2.859060] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 2.859098] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 2.859103] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 2.859111] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 2.859115] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 68900 1280 1301 1333 1408 800 804 808 816 0x8 0xa
[ 2.859122] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300
[ 2.859127] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 2.859130] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 2.859136] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 2.859140] [drm:parse_mipi], No MIPI BDB found
[ 2.859148] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 2.859162] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
[ 2.859217] [drm:intel_modeset_init], 2 display pipes available.
[ 2.859224] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 2.859227] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 2.859236] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 2.859239] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 2.859242] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 2.859250] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.960058] [drm:intel_lvds_init], using preferred mode from EDID:
[ 2.960065] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 2.960078] [drm:intel_lvds_init], detected single-link lvds configuration
[ 2.960286] [drm:intel_panel_get_backlight], get backlight PWM = 15625
[ 2.960291] [drm:intel_panel_get_max_backlight], max backlight PWM = 15625
[ 2.960700] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[ 2.969060] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 2.969072] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 2.969130] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
[ 2.969275] [drm] initialized overlay support
[ 2.969281] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[ 2.969294] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 2.969300] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[ 2.969304] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe A
[ 2.969309] [drm:intel_modeset_readout_hw_state], [ENCODER:14:TV-14] hw state readout: disabled, pipe A
[ 2.969314] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 2.969319] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
[ 2.969323] [drm:intel_modeset_readout_hw_state], [CONNECTOR:13:SVIDEO-1] hw state readout: disabled
[ 2.969330] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 2.969333] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 2.969336] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 2.969340] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.969344] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.969348] [drm:intel_dump_pipe_config], requested mode:
[ 2.969351] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 2.969356] [drm:intel_dump_pipe_config], adjusted mode:
[ 2.969359] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 2.969364] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 2.969368] [drm:intel_dump_pipe_config], port clock: 0
[ 2.969371] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 2.969375] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 2.969378] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 2.969382] [drm:intel_dump_pipe_config], ips: 0
[ 2.969385] [drm:intel_dump_pipe_config], double wide: 0
[ 2.969389] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 2.969393] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 2.969395] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 2.969399] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.969403] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.969407] [drm:intel_dump_pipe_config], requested mode:
[ 2.969409] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 2.969414] [drm:intel_dump_pipe_config], adjusted mode:
[ 2.969417] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 2.969422] [drm:intel_dump_crtc_timings], crtc timings: 69048 1280 1301 1333 1408 800 804 808 816, type: 0x0 flags: 0xa
[ 2.969427] [drm:intel_dump_pipe_config], port clock: 69048
[ 2.969430] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 2.969433] [drm:intel_dump_pipe_config], gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
[ 2.969437] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 2.969441] [drm:intel_dump_pipe_config], ips: 0
[ 2.969444] [drm:intel_dump_pipe_config], double wide: 0
[ 2.969448] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 2.969452] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 2.969457] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 2.969461] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 2.969465] [drm:check_crtc_state], [CRTC:3]
[ 2.969469] [drm:check_crtc_state], [CRTC:4]
[ 2.969490] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 2.969494] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 2.969514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 2.969518] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 2.969524] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 2.969528] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 2.984301] [drm:intel_crt_detect], CRT not detected via hotplug
[ 2.996290] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 2.996302] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.996307] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.996310] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.997023] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.997028] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.997032] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 2.997038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 2.997044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[ 2.997048] [drm:intel_tv_detect], [CONNECTOR:13:SVIDEO-1] force=1
[ 2.997053] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 2.997057] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[ 2.997075] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 2.997081] [drm:connected_sink_compute_bpp], [CONNECTOR:13:SVIDEO-1] checking for sink bpp constrains
[ 2.997086] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[ 2.997090] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 2.997093] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 2.997097] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 2.997100] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 2.997103] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.997107] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.997111] [drm:intel_dump_pipe_config], requested mode:
[ 2.997114] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 2.997120] [drm:intel_dump_pipe_config], adjusted mode:
[ 2.997123] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 2.997128] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 2.997133] [drm:intel_dump_pipe_config], port clock: 108000
[ 2.997136] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 2.997139] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 2.997143] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 2.997146] [drm:intel_dump_pipe_config], ips: 0
[ 2.997149] [drm:intel_dump_pipe_config], double wide: 0
[ 3.003419] type=1400 audit(1384853086.358:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
[ 3.003433] type=1400 audit(1384853086.358:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[ 3.003441] type=1400 audit(1384853086.358:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
[ 3.004556] type=1400 audit(1384853086.362:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[ 3.004567] type=1400 audit(1384853086.362:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
[ 3.010724] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[ 3.010737] [drm:intel_crtc_mode_set], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[ 3.016378] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 3.016384] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 3.016387] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[ 3.016391] [drm:intel_calculate_wm], FIFO watermark level: -5
[ 3.016394] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[ 3.016397] [drm:i9xx_update_wm], self-refresh entries: 80
[ 3.016400] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[ 3.016404] [drm:i9xx_update_wm], memory self refresh enabled
[ 3.041950] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 3.041962] [drm:intel_connector_check_state], [CONNECTOR:13:SVIDEO-1]
[ 3.041966] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 3.041970] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 3.041974] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 3.041979] [drm:check_crtc_state], [CRTC:3]
[ 3.041993] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 0)
[ 3.042051] ------------[ cut here ]------------
[ 3.042108] WARNING: CPU: 1 PID: 442 at drivers/gpu/drm/i915/intel_display.c:9262 check_crtc_state+0x289/0x360 [i915]()
[ 3.042111] pipe state doesn't match!
[ 3.042113] Modules linked in: snd_seq snd_timer snd_seq_device i915(+) drm_kms_helper lpc_ich mac_hid snd drm bnep i2c_algo_bit soundcore snd_page_alloc rfcomm bluetooth video parport_pc ppdev lp parport 8139too 8139cp
[ 3.042140] CPU: 1 PID: 442 Comm: modprobe Not tainted 3.13.0-rc1-winsoft-pae #6
[ 3.042143] Hardware name: FUJITSU SIEMENS AMILO Pro Edition V3405 /AMILO Pro Edition V3405 , BIOS R01-B0E 03/20/2007
[ 3.042147] 00000000 00000000 f6fb17e4 c15f6078 f893054c f6fb1814 c1041d24 f893a2ff
[ 3.042156] f6fb1840 000001ba f893054c 0000242e f88dd549 f88dd549 f6dfd000 f6dfd64c
[ 3.042164] 00000001 f6fb182c c1041de3 00000009 f6fb1824 f893a2ff f6fb1840 f6fb1a9c
[ 3.042173] Call Trace:
[ 3.042184] [<c15f6078>] dump_stack+0x41/0x52
[ 3.042191] [<c1041d24>] warn_slowpath_common+0x84/0xa0
[ 3.042229] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 3.042266] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 3.042271] [<c1041de3>] warn_slowpath_fmt+0x33/0x40
[ 3.042309] [<f88dd549>] check_crtc_state+0x289/0x360 [i915]
[ 3.042352] [<f88e83e5>] intel_modeset_check_state+0x55/0x90 [i915]
[ 3.042390] [<f88e8454>] intel_set_mode+0x34/0x40 [i915]
[ 3.042428] [<f88e928d>] intel_get_load_detect_pipe+0x21d/0x300 [i915]
[ 3.042474] [<f890dc85>] intel_tv_detect+0x125/0x230 [i915]
[ 3.042484] [<f86fb0b0>] drm_helper_probe_single_connector_modes+0x1d0/0x360 [drm_kms_helper]
[ 3.042493] [<f86fe4e2>] drm_fb_helper_initial_config+0x62/0xb0 [drm_kms_helper]
[ 3.042539] [<f891f22e>] intel_fbdev_initial_config+0x1e/0x20 [i915]
[ 3.042569] [<f88ac8da>] i915_load_modeset_init+0x1ba/0x1e0 [i915]
[ 3.042599] [<f88ac9d0>] ? i915_switcheroo_set_state+0xa0/0xa0 [i915]
[ 3.042630] [<f88aefff>] i915_driver_load+0x6af/0x810 [i915]
[ 3.042653] [<f8749e5c>] drm_dev_register+0x8c/0x1a0 [drm]
[ 3.042671] [<f874be62>] drm_get_pci_dev+0x82/0x140 [drm]
[ 3.042679] [<c11b3a9c>] ? sysfs_do_create_link_sd.isra.3+0xac/0x1d0
[ 3.042709] [<f88ab60a>] i915_pci_probe+0x4a/0x90 [i915]
[ 3.042717] [<c12fdabb>] pci_device_probe+0x7b/0xd0
[ 3.042721] [<c11b3be5>] ? sysfs_create_link+0x25/0x40
[ 3.042728] [<c13ba5eb>] really_probe+0x4b/0x1c0
[ 3.042734] [<c13c5050>] ? pm_runtime_barrier+0x40/0xa0
[ 3.042739] [<c13ba893>] driver_probe_device+0x33/0x50
[ 3.042743] [<c13ba941>] __driver_attach+0x91/0xa0
[ 3.042748] [<c13ba8b0>] ? driver_probe_device+0x50/0x50
[ 3.042753] [<c13b907a>] bus_for_each_dev+0x4a/0x80
[ 3.042758] [<c13ba2d1>] driver_attach+0x21/0x30
[ 3.042762] [<c13ba8b0>] ? driver_probe_device+0x50/0x50
[ 3.042767] [<c13b9f04>] bus_add_driver+0xd4/0x1e0
[ 3.042772] [<c13baf19>] driver_register+0x59/0xe0
[ 3.042777] [<c12fcc93>] __pci_register_driver+0x33/0x40
[ 3.042795] [<f874c01d>] drm_pci_init+0xfd/0x110 [drm]
[ 3.042825] [<f871105e>] i915_init+0x5e/0x60 [i915]
[ 3.042830] [<c10003cb>] do_one_initcall+0x3b/0x150
[ 3.042835] [<f8711000>] ? 0xf8710fff
[ 3.042839] [<f8711000>] ? 0xf8710fff
[ 3.042845] [<c1038baf>] ? set_memory_nx+0x5f/0x70
[ 3.042852] [<c15ed152>] do_init_module+0x80/0x1c6
[ 3.042859] [<c10aea37>] load_module+0x2b7/0x430
[ 3.042864] [<c10ace90>] ? show_initstate+0x50/0x50
[ 3.042870] [<c10aec46>] SyS_init_module+0x96/0xb0
[ 3.042877] [<c16070c1>] sysenter_do_call+0x12/0x22
[ 3.042880] ---[ end trace 7d7860298cbd10c5 ]---
[ 3.042883] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
[ 3.042887] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 3.042891] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 3.042894] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.042898] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.042902] [drm:intel_dump_pipe_config], requested mode:
[ 3.042905] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 3.042911] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.042914] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.042918] [drm:intel_dump_crtc_timings], crtc timings: 0 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x0 flags: 0x0
[ 3.042923] [drm:intel_dump_pipe_config], port clock: 108000
[ 3.042926] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 3.042930] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.042933] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.042937] [drm:intel_dump_pipe_config], ips: 0
[ 3.042940] [drm:intel_dump_pipe_config], double wide: 0
[ 3.042943] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
[ 3.042946] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 3.042949] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 3.042952] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.042956] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.042960] [drm:intel_dump_pipe_config], requested mode:
[ 3.042963] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 3.042968] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.042971] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 3.042976] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 3.042981] [drm:intel_dump_pipe_config], port clock: 108000
[ 3.042984] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 3.042987] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.042991] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.042995] [drm:intel_dump_pipe_config], ips: 0
[ 3.042997] [drm:intel_dump_pipe_config], double wide: 0
[ 3.043001] [drm:check_crtc_state], [CRTC:4]
[ 3.072270] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[ 3.072278] [drm:intel_tv_detect_type], Unrecognised TV connection
[ 3.104316] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 3.104328] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 3.152389] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 3.152398] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 3.152402] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 3.152405] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 3.152409] [drm:i9xx_update_wm], memory self refresh disabled
[ 3.152521] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 3.152527] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 3.152531] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 3.152535] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 3.152539] [drm:check_crtc_state], [CRTC:3]
[ 3.152543] [drm:check_crtc_state], [CRTC:4]
[ 3.152732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[ 3.152737] [drm:drm_setup_crtcs],
[ 3.152741] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 3.152745] [drm:drm_enable_connectors], connector 11 enabled? no
[ 3.152748] [drm:drm_enable_connectors], connector 13 enabled? no
[ 3.152752] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 3.152755] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 3.152758] [drm:drm_target_preferred], found mode 1280x800
[ 3.152761] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[ 3.152766] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4
[ 3.152774] [drm:i915_gem_object_create_stolen], creating stolen object: size=3e8000
[ 3.152779] [drm:i915_pages_create_for_stolen], offset=0x20000, size=4096000
[ 3.154969] [drm:intelfb_create], allocated 1280x800 fb: 0x00020000, bo f4df2100
[ 3.181094] fbcon: inteldrmfb (fb0) is primary device
[ 3.184189] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 3.184194] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.184199] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.184202] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 3.184205] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 3.184208] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 3.184212] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.184216] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 3.184219] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[ 3.184222] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.184227] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 3.184232] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[ 3.184236] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 3.184241] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 3.184244] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[ 3.184247] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 3.184249] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 3.184252] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.184254] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.184256] [drm:intel_dump_pipe_config], requested mode:
[ 3.184261] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 3.184262] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.184266] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 3.184270] [drm:intel_dump_crtc_timings], crtc timings: 68900 1280 1301 1333 1408 800 804 808 816, type: 0x48 flags: 0xa
[ 3.184272] [drm:intel_dump_pipe_config], port clock: 68900
[ 3.184275] [drm:intel_dump_pipe_config], pipe src size: 1280x800
[ 3.184277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[ 3.184280] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.184282] [drm:intel_dump_pipe_config], ips: 0
[ 3.184284] [drm:intel_dump_pipe_config], double wide: 0
[ 3.184287] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 3.432428] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 3.448255] scsi6 : usb-storage 1-2:1.0
[ 3.452434] usbcore: registered new interface driver usb-storage
[ 3.627753] rtw driver version=v3.4.4_4749.20121105
[ 3.627755] Build at: Nov 19 2013 09:14:18
[ 3.627805] register rtw_netdev_ops to netdev_ops
[ 3.627806] CHIP TYPE: RTL8188C_8192C
[ 3.627809]
[ 3.627809] usb_endpoint_descriptor(0):
[ 3.627810] bLength=7
[ 3.627811] bDescriptorType=5
[ 3.627812] bEndpointAddress=81
[ 3.627813] wMaxPacketSize=200
[ 3.627813] bInterval=0
[ 3.627814] RT_usb_endpoint_is_bulk_in = 1
[ 3.627815]
[ 3.627815] usb_endpoint_descriptor(1):
[ 3.627816] bLength=7
[ 3.627817] bDescriptorType=5
[ 3.627817] bEndpointAddress=2
[ 3.627818] wMaxPacketSize=200
[ 3.627819] bInterval=0
[ 3.627820] RT_usb_endpoint_is_bulk_out = 2
[ 3.627820]
[ 3.627820] usb_endpoint_descriptor(2):
[ 3.627821] bLength=7
[ 3.627822] bDescriptorType=5
[ 3.627823] bEndpointAddress=3
[ 3.627823] wMaxPacketSize=200
[ 3.627824] bInterval=0
[ 3.627825] RT_usb_endpoint_is_bulk_out = 3
[ 3.627826]
[ 3.627826] usb_endpoint_descriptor(3):
[ 3.627827] bLength=7
[ 3.627827] bDescriptorType=5
[ 3.627828] bEndpointAddress=84
[ 3.627829] wMaxPacketSize=40
[ 3.627830] bInterval=1
[ 3.627831] RT_usb_endpoint_is_int_in = 4, Interval = 1
[ 3.627832] nr_endpoint=4, in_num=2, out_num=2
[ 3.627832]
[ 3.627833] USB_SPEED_HIGH
[ 3.628084] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
[ 3.628085] RF_Type is 3!!
[ 3.629657] EEPROM type is E-FUSE
[ 3.629658] ====> ReadAdapterInfo8192C
[ 3.629780] Boot from EFUSE, Autoload OK !
[ 3.641018] [drm:i9xx_pfit_disable], disabling pfit, current: 0x80002668
[ 3.641025] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 3.641027] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 3.641030] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 3.641033] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 3.641036] [drm:i9xx_update_wm], memory self refresh disabled
[ 3.641045] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
[ 3.643176] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[ 3.643183] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1280x800]
[ 3.643860] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 3.643862] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[ 3.643864] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 3.643867] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 3.643869] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[ 3.643872] [drm:i9xx_update_wm], self-refresh entries: 80
[ 3.643874] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[ 3.643877] [drm:i9xx_update_wm], memory self refresh enabled
[ 3.705210] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 125166
[ 3.734911] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 3.908149] EEPROMVID = 0x7392
[ 3.908150] EEPROMPID = 0x7811
[ 3.908151] EEPROMCustomerID : 0x00
[ 3.908152] EEPROMSubCustomerID: 0x00
[ 3.908153] RT_CustomerID: 0x00
[ 3.908156] _ReadMACAddress MAC Address from EFUSE = 80:1f:02:8f:74:e8
[ 3.908158] EEPROMRegulatory = 0x0
[ 3.908159] _ReadBoardType(0)
[ 3.908161] BT Coexistance = disable
[ 3.908162] RT_ChannelPlan: 0x02
[ 3.908164] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
[ 3.908165] ### PS params=> power_mgnt(1),usbss_enable(0) ###
[ 3.908166] ### AntDivCfg(0)
[ 3.908167] readAdapterInfo_8192CU(): REPLACEMENT = 1
[ 3.908170] <==== ReadAdapterInfo8192C in 280 ms
[ 3.908550] rtw_macaddr_cfg MAC Address = 80:1f:02:8f:74:e8
[ 3.908552] MAC Address from pnetdev->dev_addr= 80:1f:02:8f:74:e8
[ 3.908982] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[ 3.909459] usbcore: registered new interface driver rtl8192cu
[ 4.040048] [drm:intel_panel_enable_backlight], pipe B
[ 4.040051] [drm:intel_panel_actually_set_backlight], set backlight PWM = 15625
[ 4.040063] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 4.040069] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 4.040072] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 4.040075] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 4.040079] [drm:check_crtc_state], [CRTC:3]
[ 4.040082] [drm:check_crtc_state], [CRTC:4]
[ 4.040138] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.040143] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.040146] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.056355] Console: switching to colour frame buffer device 160x50
[ 4.056372] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.056378] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.056382] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.062425] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.062430] i915 0000:00:02.0: registered panic notifier
[ 4.072462] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.072468] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.072472] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.081455] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.081797] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 4.179857] init: failsafe main process (798) killed by TERM signal
[ 4.197230] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.221428] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.221435] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.221439] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.452845] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Fit 1.22 PQ: 0 ANSI: 5
[ 4.453337] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.453913] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.454915] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.454921] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4.455923] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.462061] sdb: sdb1
[ 4.467047] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.544996] bDriverStopped=1
[ 4.549213] +871x_drv - drv_open, bup=0
[ 4.556669] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
[ 4.556678] FirmwareDownload92C accquire FW from embedded image
[ 4.556682] fw_ver=v80, fw_subver=0, sig=0x88c0
[ 4.752150] Polling FW ready fail!! REG_MCUFWDL:0x00030006 .
[ 4.752279] Reset 51 write8 REG_SYS_FUNC_EN:0x00f8
[ 4.752465] Reset 51 write8 REG_SYS_FUNC_EN:0x00fc
[ 4.754434] init: udev-fallback-graphics main process (989) terminated with status 1
[ 4.758030] fw download ok!
[ 4.758035] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[ 4.805050] [drm:i915_gem_open],
[ 4.805091] [drm:intel_crtc_cursor_set], cursor off
[ 4.805096] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 4.805101] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 4.805107] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.805111] [drm:intel_crtc_cursor_set], cursor off
[ 4.805115] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.805121] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.805124] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.805141] [drm:i915_gem_open],
[ 4.805159] [drm:intel_crtc_cursor_set], cursor off
[ 4.805162] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[ 4.805166] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 4.805170] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.805173] [drm:intel_crtc_cursor_set], cursor off
[ 4.805176] [drm:intel_crtc_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[ 4.805181] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 4.805184] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.805198] [drm:i915_gem_open],
[ 4.805319] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 4.805326] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 4.805335] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4.805340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 4.805344] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 4.805362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 4.805365] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68900 1280 1301 1333 1408 800 804 808 816 0x48 0xa
[ 4.805373] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4.825024] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 4.825036] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 4.825040] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 4.840036] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4.844117] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4.844128] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.844132] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.844136] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4.844422] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.844425] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4.844429] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4.844434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 4.844449] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 4.844453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 4.844457] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 4.860075] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4.864068] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4.864076] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.864080] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.864084] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4.864373] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.864376] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4.864380] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4.864385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 4.864405] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 4.864410] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[ 4.864413] [drm:intel_tv_detect], [CONNECTOR:13:SVIDEO-1] force=1
[ 4.864419] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 4.864423] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[ 4.864445] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 4.864452] [drm:connected_sink_compute_bpp], [CONNECTOR:13:SVIDEO-1] checking for sink bpp constrains
[ 4.864456] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[ 4.864460] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4.864464] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 4.864468] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 4.864471] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.864474] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.864478] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.864482] [drm:intel_dump_pipe_config], requested mode:
[ 4.864485] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 4.864491] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.864494] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 4.864499] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 4.864504] [drm:intel_dump_pipe_config], port clock: 108000
[ 4.864507] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 4.864510] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.864514] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 4.864518] [drm:intel_dump_pipe_config], ips: 0
[ 4.864521] [drm:intel_dump_pipe_config], double wide: 0
[ 4.873023] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[ 4.873037] [drm:intel_crtc_mode_set], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[ 4.878680] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 4.878688] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[ 4.878691] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 4.878694] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 4.878698] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[ 4.878701] [drm:intel_calculate_wm], FIFO watermark level: -5
[ 4.878704] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[ 4.878708] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[ 4.878712] [drm:i9xx_update_wm], memory self refresh disabled
[ 4.900069] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 4.900080] [drm:intel_connector_check_state], [CONNECTOR:13:SVIDEO-1]
[ 4.900084] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 4.900088] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 4.900092] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 4.900097] [drm:check_crtc_state], [CRTC:3]
[ 4.900111] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 0)
[ 4.900220] ------------[ cut here ]------------
[ 4.900265] WARNING: CPU: 1 PID: 264 at drivers/gpu/drm/i915/intel_display.c:9262 check_crtc_state+0x289/0x360 [i915]()
[ 4.900268] pipe state doesn't match!
[ 4.900270] Modules linked in: snd_hda_codec_si3054 snd_hda_codec_realtek joydev 8192cu(O) usb_storage snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi psmouse serio_raw snd_seq_midi_event snd_seq snd_timer snd_seq_device i915 drm_kms_helper lpc_ich mac_hid snd drm bnep i2c_algo_bit soundcore snd_page_alloc rfcomm bluetooth video parport_pc ppdev lp parport 8139too 8139cp
[ 4.900310] CPU: 1 PID: 264 Comm: plymouthd Tainted: G W O 3.13.0-rc1-winsoft-pae #6
[ 4.900313] Hardware name: FUJITSU SIEMENS AMILO Pro Edition V3405 /AMILO Pro Edition V3405 , BIOS R01-B0E 03/20/2007
[ 4.900316] 00000000 00000000 f6fa1964 c15f6078 f893054c f6fa1994 c1041d24 f893a2ff
[ 4.900326] f6fa19c0 00000108 f893054c 0000242e f88dd549 f88dd549 f6dfd000 f6dfd64c
[ 4.900334] 00000001 f6fa19ac c1041de3 00000009 f6fa19a4 f893a2ff f6fa19c0 f6fa1c1c
[ 4.900343] Call Trace:
[ 4.900353] [<c15f6078>] dump_stack+0x41/0x52
[ 4.900361] [<c1041d24>] warn_slowpath_common+0x84/0xa0
[ 4.900391] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 4.900421] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 4.900426] [<c1041de3>] warn_slowpath_fmt+0x33/0x40
[ 4.900455] [<f88dd549>] check_crtc_state+0x289/0x360 [i915]
[ 4.900490] [<f88e83e5>] intel_modeset_check_state+0x55/0x90 [i915]
[ 4.900520] [<f88e8454>] intel_set_mode+0x34/0x40 [i915]
[ 4.900551] [<f88e928d>] intel_get_load_detect_pipe+0x21d/0x300 [i915]
[ 4.900588] [<f890dc85>] intel_tv_detect+0x125/0x230 [i915]
[ 4.900600] [<f86fb0b0>] drm_helper_probe_single_connector_modes+0x1d0/0x360 [drm_kms_helper]
[ 4.900626] [<f874eeec>] ? drm_mode_object_find+0x6c/0xb0 [drm]
[ 4.900648] [<f8752371>] drm_mode_getconnector+0x371/0x3a0 [drm]
[ 4.900665] [<f87448d8>] drm_ioctl+0x488/0x530 [drm]
[ 4.900686] [<f8752000>] ? drm_mode_getcrtc+0xc0/0xc0 [drm]
[ 4.900694] [<c16034b0>] ? __do_page_fault+0x510/0x510
[ 4.900699] [<c1603237>] ? __do_page_fault+0x297/0x510
[ 4.900714] [<f8744450>] ? drm_free_buffer+0x30/0x30 [drm]
[ 4.900720] [<c1162bd2>] do_vfs_ioctl+0x72/0x2d0
[ 4.900725] [<c1162ec7>] SyS_ioctl+0x97/0xa0
[ 4.900731] [<c16070c1>] sysenter_do_call+0x12/0x22
[ 4.900734] ---[ end trace 7d7860298cbd10c6 ]---
[ 4.900738] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
[ 4.900742] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 4.900745] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 4.900748] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.900752] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.900756] [drm:intel_dump_pipe_config], requested mode:
[ 4.900759] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 4.900765] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.900768] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.900772] [drm:intel_dump_crtc_timings], crtc timings: 0 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x0 flags: 0x0
[ 4.900777] [drm:intel_dump_pipe_config], port clock: 108000
[ 4.900781] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 4.900784] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.900788] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 4.900791] [drm:intel_dump_pipe_config], ips: 0
[ 4.900794] [drm:intel_dump_pipe_config], double wide: 0
[ 4.900797] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
[ 4.900800] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 4.900803] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.900807] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.900811] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.900815] [drm:intel_dump_pipe_config], requested mode:
[ 4.900818] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 4.900823] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.900826] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 4.900831] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 4.900836] [drm:intel_dump_pipe_config], port clock: 108000
[ 4.900839] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 4.900842] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.900846] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 4.900849] [drm:intel_dump_pipe_config], ips: 0
[ 4.900852] [drm:intel_dump_pipe_config], double wide: 0
[ 4.900856] [drm:check_crtc_state], [CRTC:4]
[ 4.940064] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[ 4.940074] [drm:intel_tv_detect_type], Unrecognised TV connection
[ 4.956086] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 4.956099] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 5.001048] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.001058] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[ 5.001061] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 5.001065] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.001068] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[ 5.001072] [drm:i9xx_update_wm], self-refresh entries: 80
[ 5.001075] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[ 5.001079] [drm:i9xx_update_wm], memory self refresh enabled
[ 5.001092] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 5.001098] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 5.001102] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 5.001106] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 5.001110] [drm:check_crtc_state], [CRTC:3]
[ 5.001114] [drm:check_crtc_state], [CRTC:4]
[ 5.001318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[ 5.002332] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 5.002337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[ 5.002341] [drm:intel_tv_detect], [CONNECTOR:13:SVIDEO-1] force=1
[ 5.002345] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 5.002349] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[ 5.002368] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 5.002374] [drm:connected_sink_compute_bpp], [CONNECTOR:13:SVIDEO-1] checking for sink bpp constrains
[ 5.002379] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[ 5.002383] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 5.002386] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 5.002390] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 5.002393] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 5.002397] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.002401] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.002404] [drm:intel_dump_pipe_config], requested mode:
[ 5.002408] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 5.002413] [drm:intel_dump_pipe_config], adjusted mode:
[ 5.002416] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 5.002421] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 5.002426] [drm:intel_dump_pipe_config], port clock: 108000
[ 5.002429] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 5.002433] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 5.002436] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 5.002440] [drm:intel_dump_pipe_config], ips: 0
[ 5.002443] [drm:intel_dump_pipe_config], double wide: 0
[ 5.013122] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[ 5.013138] [drm:intel_crtc_mode_set], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[ 5.018791] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.018799] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[ 5.018802] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 5.018805] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.018809] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[ 5.018812] [drm:intel_calculate_wm], FIFO watermark level: -5
[ 5.018815] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[ 5.018818] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[ 5.018822] [drm:i9xx_update_wm], memory self refresh disabled
[ 5.040139] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 5.040152] [drm:intel_connector_check_state], [CONNECTOR:13:SVIDEO-1]
[ 5.040155] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 5.040160] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 5.040164] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 5.040168] [drm:check_crtc_state], [CRTC:3]
[ 5.040183] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 108000, found 0)
[ 5.040296] ------------[ cut here ]------------
[ 5.040344] WARNING: CPU: 1 PID: 264 at drivers/gpu/drm/i915/intel_display.c:9262 check_crtc_state+0x289/0x360 [i915]()
[ 5.040346] pipe state doesn't match!
[ 5.040348] Modules linked in: snd_hda_codec_si3054 snd_hda_codec_realtek joydev 8192cu(O) usb_storage snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi psmouse serio_raw snd_seq_midi_event snd_seq snd_timer snd_seq_device i915 drm_kms_helper lpc_ich mac_hid snd drm bnep i2c_algo_bit soundcore snd_page_alloc rfcomm bluetooth video parport_pc ppdev lp parport 8139too 8139cp
[ 5.040389] CPU: 1 PID: 264 Comm: plymouthd Tainted: G W O 3.13.0-rc1-winsoft-pae #6
[ 5.040393] Hardware name: FUJITSU SIEMENS AMILO Pro Edition V3405 /AMILO Pro Edition V3405 , BIOS R01-B0E 03/20/2007
[ 5.040396] 00000000 00000000 f6fa1964 c15f6078 f893054c f6fa1994 c1041d24 f893a2ff
[ 5.040405] f6fa19c0 00000108 f893054c 0000242e f88dd549 f88dd549 f6dfd000 f6dfd64c
[ 5.040414] 00000001 f6fa19ac c1041de3 00000009 f6fa19a4 f893a2ff f6fa19c0 f6fa1c1c
[ 5.040423] Call Trace:
[ 5.040432] [<c15f6078>] dump_stack+0x41/0x52
[ 5.040439] [<c1041d24>] warn_slowpath_common+0x84/0xa0
[ 5.040470] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 5.040499] [<f88dd549>] ? check_crtc_state+0x289/0x360 [i915]
[ 5.040504] [<c1041de3>] warn_slowpath_fmt+0x33/0x40
[ 5.040534] [<f88dd549>] check_crtc_state+0x289/0x360 [i915]
[ 5.040569] [<f88e83e5>] intel_modeset_check_state+0x55/0x90 [i915]
[ 5.040599] [<f88e8454>] intel_set_mode+0x34/0x40 [i915]
[ 5.040629] [<f88e928d>] intel_get_load_detect_pipe+0x21d/0x300 [i915]
[ 5.040668] [<f890dc85>] intel_tv_detect+0x125/0x230 [i915]
[ 5.040679] [<f86fb0b0>] drm_helper_probe_single_connector_modes+0x1d0/0x360 [drm_kms_helper]
[ 5.040705] [<f874eeec>] ? drm_mode_object_find+0x6c/0xb0 [drm]
[ 5.040727] [<f8752371>] drm_mode_getconnector+0x371/0x3a0 [drm]
[ 5.040744] [<f87448d8>] drm_ioctl+0x488/0x530 [drm]
[ 5.040766] [<f8752000>] ? drm_mode_getcrtc+0xc0/0xc0 [drm]
[ 5.040773] [<c116556d>] ? d_kill+0x7d/0x90
[ 5.040778] [<c11666dc>] ? dentry_kill+0xac/0xd0
[ 5.040793] [<f8744450>] ? drm_free_buffer+0x30/0x30 [drm]
[ 5.040799] [<c1162bd2>] do_vfs_ioctl+0x72/0x2d0
[ 5.040803] [<c1162ec7>] SyS_ioctl+0x97/0xa0
[ 5.040809] [<c16070c1>] sysenter_do_call+0x12/0x22
[ 5.040812] ---[ end trace 7d7860298cbd10c7 ]---
[ 5.040816] [drm:intel_dump_pipe_config], [CRTC:3][hw state] config for pipe A
[ 5.040820] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 5.040823] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 5.040827] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.040831] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.040835] [drm:intel_dump_pipe_config], requested mode:
[ 5.040838] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[ 5.040843] [drm:intel_dump_pipe_config], adjusted mode:
[ 5.040846] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 5.040851] [drm:intel_dump_crtc_timings], crtc timings: 0 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x0 flags: 0x0
[ 5.040856] [drm:intel_dump_pipe_config], port clock: 108000
[ 5.040859] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 5.040863] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 5.040866] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 5.040870] [drm:intel_dump_pipe_config], ips: 0
[ 5.040873] [drm:intel_dump_pipe_config], double wide: 0
[ 5.040876] [drm:intel_dump_pipe_config], [CRTC:3][sw state] config for pipe A
[ 5.040879] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 5.040882] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 5.040886] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.040890] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 5.040894] [drm:intel_dump_pipe_config], requested mode:
[ 5.040897] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 5.040902] [drm:intel_dump_pipe_config], adjusted mode:
[ 5.040905] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 5.040910] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[ 5.040915] [drm:intel_dump_pipe_config], port clock: 108000
[ 5.040918] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[ 5.040921] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 5.040925] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 5.040928] [drm:intel_dump_pipe_config], ips: 0
[ 5.040931] [drm:intel_dump_pipe_config], double wide: 0
[ 5.040935] [drm:check_crtc_state], [CRTC:4]
[ 5.088097] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[ 5.088107] [drm:intel_tv_detect_type], Unrecognised TV connection
[ 5.120097] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[ 5.120110] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 5.159780] IQK:Start!!!
[ 5.165234] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.165245] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[ 5.165248] [drm:intel_calculate_wm], FIFO watermark level: 4
[ 5.165252] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.165256] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[ 5.165259] [drm:i9xx_update_wm], self-refresh entries: 80
[ 5.165263] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[ 5.165266] [drm:i9xx_update_wm], memory self refresh enabled
[ 5.165310] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 5.165316] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 5.165320] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 5.165324] [drm:check_encoder_state], [ENCODER:14:TV-14]
[ 5.165328] [drm:check_crtc_state], [CRTC:3]
[ 5.165332] [drm:check_crtc_state], [CRTC:4]
[ 5.165545] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[ 5.179900] Path A IQK Success!!
[ 5.187651] Path A IQK Success!!
[ 5.192526] IQK: final_candidate is 0
[ 5.192535] IQK: RegE94=101 RegE9C=11 RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
[ 5.192535] Path A IQ Calibration Success !
[ 5.303788] pdmpriv->TxPowerTrackControl = 1
[ 5.308786] MAC Address from REG_MACID = 80:1f:02:8f:74:e8
[ 5.308794] rtl8192cu_hal_init in 760ms
[ 5.308799] MAC Address = 80:1f:02:8f:74:e8
[ 5.313844] -871x_drv - drv_open, bup=1
[ 5.313904] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 5.314395] set_mode = IW_MODE_INFRA
[ 5.322674] 8139too 0000:0a:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 5.357089] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 5.357102] set_mode = IW_MODE_INFRA
[ 5.372220] [drm:drm_mode_addfb], [FB:30]
[ 5.372265] [drm:drm_mode_setcrtc], [CRTC:4]
[ 5.372274] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 5.372278] [drm:intel_crtc_set_config], [CRTC:4] [FB:30] #connectors=1 (x y) (0 0)
[ 5.372286] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
[ 5.372292] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 5.379581] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[ 5.402980] [drm:drm_mode_setcrtc], [CRTC:4]
[ 5.402996] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 5.403000] [drm:intel_crtc_set_config], [CRTC:4] [FB:30] #connectors=1 (x y) (0 0)
[ 5.403008] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 5.403014] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 5.424181] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx