Re: [PATCH 2/5] drm/i915: Initialise min/max frequencies before updating RPS registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 07, 2013 at 07:43:48PM +0200, Ville Syrjälä wrote:
> On Wed, Nov 06, 2013 at 01:56:26PM -0200, Rodrigo Vivi wrote:
> > From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > 
> > The RPS register writing routines use the current value of min/max to
> > set certain limits and interrupt gating. If we set those afterwards, we
> > risk setting up the hw incorrectly and losing power management events,
> > and worse, trigger some internal assertions.
> > 
> > Reorder the calling sequences to be correct, and remove the then
> > unrequired clamping from inside set_rps(). And for a bonus, fix the bug
> > of calling gen6_set_rps() from Valleyview.
> > 
> > Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > Reviewer: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > CC: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> > ---
> >  drivers/gpu/drm/i915/i915_debugfs.c |  2 +-
> >  drivers/gpu/drm/i915/i915_sysfs.c   | 16 ++++++++--------
> >  drivers/gpu/drm/i915/intel_pm.c     | 19 +++++--------------
> >  3 files changed, 14 insertions(+), 23 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 7008aac..5b28602 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2758,7 +2758,7 @@ i915_max_freq_set(void *data, u64 val)
> >  	if (IS_VALLEYVIEW(dev)) {
> >  		val = vlv_freq_opcode(dev_priv->mem_freq, val);
> >  		dev_priv->rps.max_delay = val;
> > -		gen6_set_rps(dev, val);
> > +		valleyview_set_rps(dev, val);
> >  	} else {
> >  		do_div(val, GT_FREQUENCY_MULTIPLIER);
> >  		dev_priv->rps.max_delay = val;
> > diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
> > index cef38fd..46291c4 100644
> > --- a/drivers/gpu/drm/i915/i915_sysfs.c
> > +++ b/drivers/gpu/drm/i915/i915_sysfs.c
> > @@ -342,15 +342,15 @@ static ssize_t gt_max_freq_mhz_store(struct device *kdev,
> >  		DRM_DEBUG("User requested overclocking to %d\n",
> >  			  val * GT_FREQUENCY_MULTIPLIER);
> >  
> > +	dev_priv->rps.max_delay = val;
> > +
> >  	if (dev_priv->rps.cur_delay > val) {
> > -		if (IS_VALLEYVIEW(dev_priv->dev))
> > -			valleyview_set_rps(dev_priv->dev, val);
> > +		if (IS_VALLEYVIEW(dev))
> > +			valleyview_set_rps(dev, val);
> >  		else
> > -			gen6_set_rps(dev_priv->dev, val);
> > +			gen6_set_rps(dev, val);

Extracting all these IS_VLV blocks and having one abstract entry point
would be a nice follow-up ...

Queued for -next, thanks for the patch.
-Daniel

> >  	}
> >  
> > -	dev_priv->rps.max_delay = val;
> > -
> >  	mutex_unlock(&dev_priv->rps.hw_lock);
> >  
> >  	return count;
> > @@ -411,15 +411,15 @@ static ssize_t gt_min_freq_mhz_store(struct device *kdev,
> >  		return -EINVAL;
> >  	}
> >  
> > +	dev_priv->rps.min_delay = val;
> > +
> >  	if (dev_priv->rps.cur_delay < val) {
> >  		if (IS_VALLEYVIEW(dev))
> >  			valleyview_set_rps(dev, val);
> >  		else
> > -			gen6_set_rps(dev_priv->dev, val);
> > +			gen6_set_rps(dev, val);
> >  	}
> >  
> > -	dev_priv->rps.min_delay = val;
> > -
> >  	mutex_unlock(&dev_priv->rps.hw_lock);
> >  
> >  	return count;
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > index 09ac9e7..830865e 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -3414,26 +3414,19 @@ static void ironlake_disable_drps(struct drm_device *dev)
> >   * ourselves, instead of doing a rmw cycle (which might result in us clearing
> >   * all limits and the gpu stuck at whatever frequency it is at atm).
> >   */
> > -static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 *val)
> > +static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val)
> >  {
> >  	u32 limits;
> >  
> > -	limits = 0;
> > -
> > -	if (*val >= dev_priv->rps.max_delay)
> > -		*val = dev_priv->rps.max_delay;
> > -	limits |= dev_priv->rps.max_delay << 24;
> > -
> >  	/* Only set the down limit when we've reached the lowest level to avoid
> >  	 * getting more interrupts, otherwise leave this clear. This prevents a
> >  	 * race in the hw when coming out of rc6: There's a tiny window where
> >  	 * the hw runs at the minimal clock before selecting the desired
> >  	 * frequency, if the down threshold expires in that window we will not
> >  	 * receive a down interrupt. */
> > -	if (*val <= dev_priv->rps.min_delay) {
> > -		*val = dev_priv->rps.min_delay;
> > +	limits = dev_priv->rps.max_delay << 24;
> > +	if (val <= dev_priv->rps.min_delay)
> >  		limits |= dev_priv->rps.min_delay << 16;
> > -	}
> >  
> >  	return limits;
> >  }
> > @@ -3533,7 +3526,6 @@ static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
> >  void gen6_set_rps(struct drm_device *dev, u8 val)
> >  {
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> > -	u32 limits = gen6_rps_limits(dev_priv, &val);
> >  
> >  	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> >  	WARN_ON(val > dev_priv->rps.max_delay);
> > @@ -3556,7 +3548,8 @@ void gen6_set_rps(struct drm_device *dev, u8 val)
> >  	/* Make sure we continue to get interrupts
> >  	 * until we hit the minimum or maximum frequencies.
> >  	 */
> > -	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
> > +	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
> > +		   gen6_rps_limits(dev_priv, val));
> >  
> >  	POSTING_READ(GEN6_RPNSWREQ);
> >  
> > @@ -3620,8 +3613,6 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
> >  {
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> >  
> > -	gen6_rps_limits(dev_priv, &val);
> > -
> >  	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> >  	WARN_ON(val > dev_priv->rps.max_delay);
> >  	WARN_ON(val < dev_priv->rps.min_delay);
> > -- 
> > 1.8.3.1
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux