I was going to get this for -collector but got a big conflict.
On Fri, Oct 11, 2013 at 3:52 PM, <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Gen2 doesn't have the pixelcount register that gen3 and gen4 have.
> Instead we must use the scanline counter like we do for ctg+.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 21 +++++++++++++++------
> 1 file changed, 15 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 63a9642..3c31a2f 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -592,7 +592,7 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
> return I915_READ(reg);
> }
>
> -static bool g4x_pipe_in_vblank(struct drm_device *dev, enum pipe pipe)
> +static bool intel_pipe_in_vblank(struct drm_device *dev, enum pipe pipe)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> uint32_t status;
> @@ -603,7 +603,13 @@ static bool g4x_pipe_in_vblank(struct drm_device *dev, enum pipe pipe)
> I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
>
> return I915_READ(VLV_ISR) & status;
> - } else if (IS_G4X(dev)) {
> + } else if (IS_GEN2(dev)) {
> + status = pipe == PIPE_A ?
> + I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT :
> + I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
> +
> + return I915_READ16(ISR) & status;
> + } else if (INTEL_INFO(dev)->gen < 5) {
> status = pipe == PIPE_A ?
> I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT :
> I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
> @@ -658,11 +664,14 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
>
> ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
>
> - if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
> + if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
> /* No obvious pixelcount register. Only query vertical
> * scanout position from Display scan line register.
> */
> - position = I915_READ(PIPEDSL(pipe)) & 0x1fff;
> + if (IS_GEN2(dev))
> + position = I915_READ(PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
> + else
> + position = I915_READ(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
>
> /*
> * The scanline counter increments at the leading edge
> @@ -671,7 +680,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
> * to get a more accurate picture whether we're in vblank
> * or not.
> */
> - in_vbl = g4x_pipe_in_vblank(dev, pipe);
> + in_vbl = intel_pipe_in_vblank(dev, pipe);
> if ((in_vbl && position == vbl_start - 1) ||
> (!in_vbl && position == vbl_end - 1))
> position = (position + 1) % vtotal;
> @@ -701,7 +710,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
> else
> position += vtotal - vbl_end;
>
> - if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
> + if (IS_GEN2(dev) || IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
> *vpos = position;
> *hpos = 0;
> } else {
> --
> 1.8.1.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
