Re: [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 08 Aug 2024, Nemesa Garg <nemesa.garg@xxxxxxxxx> wrote:
> In panel fitter/pipe scaler scenario the pch_pfit configuration
> currently takes place before accounting for pipe_src width for
> joiner. This causes issue when pch_pfit and joiner get enabled
> together.
>
> Introduce a new boolean flag need_joiner which is set during dp
> compute_config in joiner case and later is used to compute
> panel_fitting in pipe_config. Modify pch_panel_fitting to handle
> joiner pipes by adjusting crtc_hdisplay accordingly.

So I still don't like the fact that intel_panel_fitting() is called in
different ways for different connectors, controlled by a flag in crtc
state.

That said, I couldn't come up with a better idea either, apart from
moving *all* panel fitting intel_modeset_pipe_config().

Cc: Ville, in case he has some ideas for this. Please hold off on
merging until we get some input from him.


Thanks,
Jani.


>
> v2: Address comments (Ankit)
> v3: Change flag name (Ankit)
>
> Signed-off-by: Nemesa Garg <nemesa.garg@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c       | 11 +++++++++++
>  drivers/gpu/drm/i915/display/intel_display_types.h |  1 +
>  drivers/gpu/drm/i915/display/intel_dp.c            | 11 ++++++++---
>  drivers/gpu/drm/i915/display/intel_panel.c         |  3 +++
>  4 files changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 8bbde03f2508..82b67c0a90e0 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4796,6 +4796,17 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  		return ret;
>  	}
>  
> +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> +		if (connector_state->crtc != &crtc->base)
> +			continue;
> +
> +		if (crtc_state->pch_pfit.need_joiner) {
> +			ret = intel_panel_fitting(crtc_state, connector_state);
> +			if (ret)
> +				return ret;
> +		}
> +	}
> +
>  	/* Dithering seems to not pass-through bits correctly when it should, so
>  	 * only enable it on 6bpc panels and when its not a compliance
>  	 * test requesting 6bpc video pattern.
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index a04d52dbf6e1..eb9713b088c6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1258,6 +1258,7 @@ struct intel_crtc_state {
>  		struct drm_rect dst;
>  		bool enabled;
>  		bool force_thru;
> +		bool need_joiner;
>  	} pch_pfit;
>  
>  	/* FDI configuration, only valid if has_pch_encoder is set. */
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 65182bf69b62..d5d9d4f21fc7 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2953,9 +2953,14 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  
>  	if ((intel_dp_is_edp(intel_dp) && fixed_mode) ||
>  	    pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> -		ret = intel_panel_fitting(pipe_config, conn_state);
> -		if (ret)
> -			return ret;
> +		if (!pipe_config->joiner_pipes) {
> +			ret = intel_panel_fitting(pipe_config, conn_state);
> +			if (ret)
> +				return ret;
> +		} else {
> +			 /* Incase of joiner panel_fitting is handled during pipe_config */
> +			pipe_config->pch_pfit.need_joiner = true;
> +		}
>  	}
>  
>  	pipe_config->limited_color_range =
> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
> index dd18136d1c61..0da45c2330d3 100644
> --- a/drivers/gpu/drm/i915/display/intel_panel.c
> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
> @@ -395,6 +395,9 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
>  	u16 crtc_hdisplay = adjusted_mode->crtc_hdisplay;
>  	u16 crtc_vdisplay = adjusted_mode->crtc_vdisplay;
>  
> +	if (crtc_state->joiner_pipes)
> +		crtc_hdisplay = adjusted_mode->crtc_hdisplay / 2;
> +
>  	/* Native modes don't need fitting */
>  	if (crtc_hdisplay == pipe_src_w &&
>  	    crtc_vdisplay == pipe_src_h &&

-- 
Jani Nikula, Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux