From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
If the eDP output is disabled, then we try to use /dev/i2c-X file to
do i2c transations, we get a WARN from intel_dp_check_edp() saying
we're trying to do AUX communication with the panel off. So this
commit reorganizes the code so we enable the VDD at
intel_dp_i2c_aux_ch() instead of just the callers inside i915.ko.
This fixes the i2c subtest from the pc8 test of intel-gpu-tools on
machines that have eDP panels.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b3cc333..05d0424 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -623,6 +623,7 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
int reply_bytes;
int ret;
+ ironlake_edp_panel_vdd_on(intel_dp);
intel_dp_check_edp(intel_dp);
/* Set up the command byte */
if (mode & MODE_I2C_READ)
@@ -665,7 +666,7 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
reply, reply_bytes);
if (ret < 0) {
DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
- return ret;
+ goto out;
}
switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
@@ -676,7 +677,8 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
break;
case AUX_NATIVE_REPLY_NACK:
DRM_DEBUG_KMS("aux_ch native nack\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
case AUX_NATIVE_REPLY_DEFER:
/*
* For now, just give more slack to branch devices. We
@@ -694,7 +696,8 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
default:
DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
reply[0]);
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
}
switch (reply[0] & AUX_I2C_REPLY_MASK) {
@@ -702,22 +705,29 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
if (mode == MODE_I2C_READ) {
*read_byte = reply[1];
}
- return reply_bytes - 1;
+ ret = reply_bytes - 1;
+ goto out;
case AUX_I2C_REPLY_NACK:
DRM_DEBUG_KMS("aux_i2c nack\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
case AUX_I2C_REPLY_DEFER:
DRM_DEBUG_KMS("aux_i2c defer\n");
udelay(100);
break;
default:
DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+ goto out;
}
}
DRM_ERROR("too many retries, giving up\n");
- return -EREMOTEIO;
+ ret = -EREMOTEIO;
+
+out:
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ return ret;
}
static int
@@ -739,9 +749,7 @@ intel_dp_i2c_init(struct intel_dp *intel_dp,
intel_dp->adapter.algo_data = &intel_dp->algo;
intel_dp->adapter.dev.parent = intel_connector->base.kdev;
- ironlake_edp_panel_vdd_on(intel_dp);
ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return ret;
}
@@ -3498,7 +3506,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
&power_seq);
- ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, &intel_dp->adapter);
if (edid) {
if (drm_add_edid_modes(connector, edid)) {
@@ -3530,8 +3537,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
- ironlake_edp_panel_vdd_off(intel_dp, false);
-
intel_panel_init(&intel_connector->panel, fixed_mode);
intel_panel_setup_backlight(connector);
--
1.8.3.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
