FWIW there's nothing in the logs indicating it's a "graphics failure". BR, Jani. On Fri, 25 Oct 2013, "Wang, Stephanie" <stephanie.wang@xxxxxxxxx> wrote: > Jesse, hey > I work for ISG FSP/OTM boot loader team under Khadker Islam. I've recently run into an issue that blocks FSP/OTM from supporting Tizen IVI 3.0 running Bay Trail B3 silicon on Bayley Bay board. > Log file with the failure is attached. The failure is very consistent, happens every time with Bay Trail B3 silicon running FSP/OTM boot loader. The boot image was generated from Tizen IVI 3.0 EFI image posted at http://download.tizen.org/releases/milestone/tizen/ivi/latest/images/ivi-release-efi-i586/. The original image from the sever booted with EFI BIOS on the same board. Our FSP/OTM is legacy boot loader without EFI support. Failure seems to be with the graphics driver. The messages from the failure log file are shown on both serial console and local console via VGA. I need some help to understand if the driver under efi OS only works with efi BIOS? Does it need some efi run time services from the BIOS? Or does it need certain POST set up from the BIOS? Also, is there a legacy version of Tizen IVI 3.0 ? if yes, where do I get this? Any help will be greatly appreciated! > Stephanie > Intel(R) Boot Loader Development Kit > [ 0.000000] Initializing cgroup subsys cpusetights reserved. > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 3.11.0-09202013 (root@jessie-vlv-bs) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #8 SMP PREEMPT Tue Oct 1 21:11:32 MYT 2013 > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fffffff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000060000000-0x00000000600fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000060100000-0x000000007b9effff] usable > [ 0.000000] BIOS-e820: [mem 0x000000007b9f0000-0x000000007b9ff5ff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000007b9ff600-0x000000007fffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reservedex[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] unusable > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable > [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! > [ 0.000000] DMI not present or invalid.a_load->kernel_execute) > [ 0.000000] e820: last_pfn = 0x7b9f0 max_arch_pfn = 0x100000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [c00fd840] > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] > [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] > [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] > [ 0.000000] ACPI: RSDP 000e0110 00024 (v02 INTEL ) > [ 0.000000] ACPI: XSDT 7b9f7c90 0004C (v01 INTEL 00000000 00000000) > [ 0.000000] ACPI: FACP 7b9f7b90 000F4 (v03 INTEL 00000000 00000000) > [ 0.000000] ACPI: DSDT 7b9f7d10 078E4 (v02 INTEL VLV-SOC 00000000 INTL 20120913) > [ 0.000000] ACPI: FACS 7b9ff600 00040 > [ 0.000000] ACPI: APIC 7b9f5b60 0008A (v01 INTEL 00000000 00000000) > [ 0.000000] ACPI: MCFG 7b9f5b20 0003C (v01 INTEL MCFG 00000000 00000000) > [ 0.000000] ACPI: HPET 7b9f5ae0 00038 (v01 INTEL 00000000 00000000) > [ 0.000000] ACPI: SSDT 7b9f5370 0076B (v01 PmRef CpuPm 00003000 INTL 20120913) > [ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI > [ 0.000000] ACPI: acpi=force override > [ 0.000000] 1089MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00001000-0x00ffffff] > [ 0.000000] Normal [mem 0x01000000-0x377fdfff] > [ 0.000000] HighMem [mem 0x377fe000-0x7b9effff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00001000-0x00097fff] > [ 0.000000] node 0: [mem 0x00100000-0x5fffffff] > [ 0.000000] node 0: [mem 0x60100000-0x7b9effff] > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-86 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 6 global_irq 6 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 13 global_irq 13 high level) > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] > [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices > [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 13 pages/cpu @f683d000 s32000 r0 d21248 u53248 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504215 > [ 0.000000] Kernel command line: rw console=tty0 console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 acpi=force rootwait > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] Initializing HighMem for node 0 (000377fe:0007b9f0) > [ 0.000000] Memory: 1992840K/2023964K available (7325K kernel code, 792K rwdata, 4788K rodata, 548K init, 600K bss, 31124K reserved, 1115080K highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc109d000 - 0xc1126000 ( 548 kB) > [ 0.000000] .data : 0xc0b27b01 - 0xc109c300 (5585 kB) > [ 0.000000] .text : 0xc0400000 - 0xc0b27b01 (7326 kB) > [ 0.000000] Checking if this processor honours the WP bit even in supervisormode...Ok. > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. > [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. > [ 0.000000] NR_IRQS:2304 nr_irqs:1024 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [ttyS0] enabled > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.001000] tsc: Detected 1916.744 MHz processor > [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3833.48 BogoMIPS (lpj=1916744) > [ 0.011889] pid_max: default: 32768 minimum: 301 > [ 0.017135] Mount-cache hash table entries: 512 > [ 0.022496] Initializing cgroup subsys devices > [ 0.027475] Initializing cgroup subsys freezer > [ 0.032449] Initializing cgroup subsys blkio > [ 0.037229] Initializing cgroup subsys perf_event > [ 0.042523] CPU: Physical Processor ID: 0 > [ 0.047011] CPU: Processor Core ID: 0 > [ 0.060719] mce: CPU supports 6 MCE banks > [ 0.065212] CPU0: Thermal monitoring enabled (TM1) > [ 0.070583] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 > [ 0.070583] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 > [ 0.070583] tlb_flushall_shift: 6 > [ 0.086516] Freeing SMP alternatives memory: 28K (c1126000 - c112d000) > [ 0.093820] ACPI: Core revision 20130517 > [ 0.106483] ACPI: All ACPI Tables successfully acquired > [ 0.112447] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.119386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.136103] smpboot: CPU0: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz (fam: 06,model: 37, stepping: 03) > [ 0.146465] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. > [ 0.157790] ... version: 3 > [ 0.162271] ... bit width: 40 > [ 0.166839] ... generic registers: 2 > [ 0.171320] ... value mask: 000000ffffffffff > [ 0.177257] ... max period: 000000ffffffffff > [ 0.183194] ... fixed-purpose events: 3 > [ 0.187666] ... event mask: 0000000700000003 > [ 0.200767] smpboot: Booting Node 0, Processors #1[ 0.216295] Initializing CPU#1 > > [ 0.233670] #2[ 0.245486] Initializing CPU#2 > > [ 0.262879] #3 OK > [ 0.275189] Initializing CPU#3 > [ 0.290302] Brought up 4 CPUs > [ 0.293624] smpboot: Total of 4 processors activated (15333.95 BogoMIPS) > [ 0.302030] devtmpfs: initialized > [ 0.306639] xor: measuring software checksum speed > [ 0.322029] pIII_sse : 5944.000 MB/sec > [ 0.336731] prefetch64-sse: 6616.000 MB/sec > [ 0.341797] xor: using function: prefetch64-sse (6616.000 MB/sec) > [ 0.348611] pinctrl core: initialized pinctrl subsystem > [ 0.354507] RTC time: 18:35:25, date: 01/03/01 > [ 0.359552] NET: Registered protocol family 16 > [ 0.365183] ACPI: bus type PCI registered > [ 0.369717] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.380129] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > [ 0.387718] PCI: Using MMCONFIG for extended config space > [ 0.393753] PCI: Using configuration type 1 for base access > [ 0.404620] bio: create slab <bio-0> at 0 > [ 0.426189] raid6: mmxx1 1257 MB/s > [ 0.447456] raid6: mmxx2 1687 MB/s > [ 0.468715] raid6: sse1x1 1273 MB/s > [ 0.489977] raid6: sse1x2 1441 MB/s > [ 0.511220] raid6: sse2x1 2515 MB/s > [ 0.532476] raid6: sse2x2 2859 MB/s > [ 0.536658] raid6: using algorithm sse2x2 (2859 MB/s) > [ 0.542305] raid6: using ssse3x1 recovery algorithm > [ 0.547876] ACPI: Added _OSI(Module Device) > [ 0.552558] ACPI: Added _OSI(Processor Device) > [ 0.557527] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.562787] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.583618] ACPI: SSDT 7b9ff640 00317 (v01 PmRef Cpu0Ist 00003000 INTL 20120913) > [ 0.593095] ACPI: Dynamic OEM Table Load: > [ 0.597594] ACPI: SSDT (null) 00317 (v01 PmRef Cpu0Ist 00003000 INTL 20120913) > [ 0.606270] ACPI: SSDT 7b9ff960 003AF (v01 PmRef Cpu0Cst 00003001 INTL 20120913) > [ 0.615547] ACPI: Dynamic OEM Table Load: > [ 0.620048] ACPI: SSDT (null) 003AF (v01 PmRef Cpu0Cst 00003001 INTL 20120913) > [ 0.629046] ACPI: SSDT 7b9ffd10 0015F (v01 PmRef ApIst 00003000 INTL 20120913) > [ 0.638381] ACPI: Dynamic OEM Table Load: > [ 0.642880] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20120913) > [ 0.651504] ACPI: SSDT 7b9ffe70 0008D (v01 PmRef ApCst 00003000 INTL 20120913) > [ 0.660795] ACPI: Dynamic OEM Table Load: > [ 0.665293] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20120913) > [ 0.675240] ACPI: Interpreter enabled > [ 0.679345] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) > [ 0.689674] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) > [ 0.700025] ACPI: (supports S0 S3 S4 S5) > [ 0.704403] ACPI: Using IOAPIC for interrupt routing > [ 0.710014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.720483] ACPI: No dock devices found. > [ 0.739716] ACPI: Power Resource [USBC] (on) > [ 0.747607] ACPI: Power Resource [P28X] (off) > [ 0.752561] ACPI: Power Resource [P18X] (off) > [ 0.762473] ACPI: Power Resource [FN00] (off) > [ 0.768427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.783644] PCI host bridge to bus 0000:00 > [ 0.788232] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.794369] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] > [ 0.801282] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] > [ 0.808194] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.815107] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.822796] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] > [ 0.830484] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] > [ 0.838173] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff] > [ 0.845861] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] > [ 0.853550] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff] > [ 0.870312] acpi PNP0A08:00: Requesting ACPI _OSC control (0x15) > [ 0.877541] acpi PNP0A08:00: ACPI _OSC control (0x14) granted > [ 0.889699] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.898662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.907623] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.916587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.925550] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.934513] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.943476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.952440] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11 12 14 15) *0, disabled. > [ 0.961835] byt_gpio INT33B2:02: GPIO interrupts flood. Pin misconfigured at BIOS/Bootloader. Offset:800h Int Status:0x1c08401 > [ 0.974687] byt_gpio INT33B2:02: GPIO interrupts flood. Pin misconfigured at BIOS/Bootloader. Offset:800h Int Status:0x1c08401 > [ 0.987624] byt_gpio INT33B2:02: Gpio 0 interrupt flood, disabling > [ 0.994627] byt_gpio INT33B2:02: Gpio 10 interrupt flood, disabling > [ 1.001719] byt_gpio INT33B2:02: Gpio 15 interrupt flood, disabling > [ 1.008807] byt_gpio INT33B2:02: Gpio 22 interrupt flood, disabling > [ 1.015907] byt_gpio INT33B2:02: Gpio 23 interrupt flood, disabling > [ 1.023007] byt_gpio INT33B2:02: Gpio 24 interrupt flood, disabling > [ 1.030120] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 18 > [ 1.038816] byt_gpio INT33B2:02: Failed to request IRQ 18 ACPI event handler > [ 1.048236] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 1.057302] vgaarb: loaded > [ 1.060334] vgaarb: bridge control possible 0000:00:02.0 > [ 1.066455] SCSI subsystem initialized > [ 1.070650] ACPI: bus type ATA registered > [ 1.075292] ACPI: bus type USB registered > [ 1.079828] usbcore: registered new interface driver usbfs > [ 1.085986] usbcore: registered new interface driver hub > [ 1.091982] usbcore: registered new device driver usb > [ 1.097691] media: Linux media interface: v0.10 > [ 1.102778] Linux video capture interface: v2.00 > [ 1.107958] pps_core: LinuxPPS API ver. 1 registered > [ 1.113509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> > [ 1.123730] PTP clock support registered > [ 1.128216] wmi: Mapper loaded > [ 1.131653] Advanced Linux Sound Architecture Driver Initialized. > [ 1.138484] PCI: Using ACPI for IRQ routing > [ 1.149768] Bluetooth: Core ver 2.16 > [ 1.153781] NET: Registered protocol family 31 > [ 1.158742] Bluetooth: HCI device and connection manager initialized > [ 1.165849] Bluetooth: HCI socket layer initialized > [ 1.171306] Bluetooth: L2CAP socket layer initialized > [ 1.176964] Bluetooth: SCO socket layer initialized > [ 1.182517] ------------[ cut here ]------------ > [ 1.187689] WARNING: CPU: 2 PID: 1 at net/wireless/reg.c:423 regulatory_init+0x8a/0xef() > [ 1.196737] db.txt is empty, you should update it... > [ 1.202089] Modules linked in: > [ 1.205710] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.11.0-09202013 #8 > [ 1.213202] 00000000 00000000 f606fea8 c0b187ec c0f83f19 f606fec0 c0433909 c10db54f > [ 1.221918] 00000000 00000190 f6234200 f606fed8 c0433984 00000009 f606fed0 c0f83f19 > [ 1.230623] f606feec f606ff1c c10db54f c0f83bcc 000001a7 c0f83f19 00000000 00000000 > [ 1.239327] Call Trace: > [ 1.242066] [<c0b187ec>] dump_stack+0x4b/0x72 > [ 1.247037] [<c0433909>] warn_slowpath_common+0x61/0x78 > [ 1.252978] [<c10db54f>] ? regulatory_init+0x8a/0xef > [ 1.258629] [<c0433984>] warn_slowpath_fmt+0x26/0x2a > [ 1.264279] [<c10db54f>] regulatory_init+0x8a/0xef > [ 1.269735] [<c10db468>] cfg80211_init+0x54/0xb1 > [ 1.274996] [<c10db414>] ? hidp_init_sockets+0x89/0x89 > [ 1.280840] [<c0400406>] do_one_initcall+0x29/0x9b > [ 1.286296] [<c109d493>] ? do_early_param+0x6f/0x6f > [ 1.291850] [<c045141c>] ? __wake_up+0x32/0x3b > [ 1.296917] [<c109d978>] ? do_basic_setup+0x69/0x98 > [ 1.302470] [<c109d98e>] do_basic_setup+0x7f/0x98 > [ 1.307828] [<c109da3e>] kernel_init_freeable+0x97/0x109 > [ 1.313866] [<c0b0c5b0>] kernel_init+0x8/0xb4 > [ 1.318837] [<c0b26837>] ret_from_kernel_thread+0x1b/0x28 > [ 1.324972] [<c0b0c5a8>] ? rest_init+0x70/0x70 > [ 1.330047] ---[ end trace 0d8d6036f0c4ca59 ]--- > [ 1.335275] cfg80211: Calling CRDA to update world regulatory domain > [ 1.342674] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 1.348142] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 1.356710] Switched to clocksource hpet > [ 1.370807] pnp: PnP ACPI init > [ 1.374251] ACPI: bus type PNP registered > [ 1.379043] system 00:02: [io 0x0400-0x047f] has been reserved > [ 1.385675] system 00:02: [io 0x0500-0x05fe] has been reserved > [ 1.407740] pnp 00:04: unknown resource type 17 in _CRS > [ 1.413592] pnp 00:04: can't evaluate _CRS: 1 > [ 1.418620] pnp: PnP ACPI: found 6 devices > [ 1.423207] ACPI: bus type PNP unregistered > [ 1.466790] NET: Registered protocol family 2 > [ 1.471917] TCP established hash table entries: 8192 (order: 4, 65536 bytes) > [ 1.479859] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > [ 1.487238] TCP: Hash tables configured (established 8192 bind 8192) > [ 1.494374] TCP: reno registered > [ 1.497991] UDP hash table entries: 512 (order: 2, 24576 bytes) > [ 1.504629] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) > [ 1.511835] NET: Registered protocol family 1 > [ 1.518217] microcode: CPU0 sig=0x30673, pf=0x1, revision=0x305 > [ 1.524844] microcode: CPU1 sig=0x30673, pf=0x1, revision=0x305 > [ 1.531472] microcode: CPU2 sig=0x30673, pf=0x1, revision=0x305 > [ 1.538113] microcode: CPU3 sig=0x30673, pf=0x1, revision=0x305 > [ 1.544793] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba > [ 1.556764] bounce pool size: 64 pages > [ 1.564879] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 1.571574] NTFS driver 2.1.30 [Flags: R/O]. > [ 1.576882] bio: create slab <bio-1> at 1 > [ 1.581715] Btrfs loaded > [ 1.584565] msgmni has been set to 1714 > [ 1.590511] alg: No test for stdrng (krng) > [ 1.595123] NET: Registered protocol family 38 > [ 1.600183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) > [ 1.608543] io scheduler noop registered > [ 1.613048] io scheduler cfq registered (default) > [ 1.619331] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 1.628499] ACPI: Power Button [PWRB] > [ 1.632694] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 > [ 1.641858] ACPI: Sleep Button [SLPB] > [ 1.646072] ACPI: Fan [FAN0] (off) > [ 1.650421] acpi device:21: registered as cooling_device1 > [ 1.661584] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [ 1.669364] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 > [ 1.679489] ACPI: Requesting acpi_cpufreq > [ 1.720609] thermal LNXTHERM:00: registered as thermal_zone0 > [ 1.726996] ACPI: Thermal Zone [TZ01] (27 C) > [ 1.732113] dw_dmac_pci: probe of 0000:00:18.0 failed with error -2 > [ 1.739406] dw_dmac_pci 0000:00:1e.0: DesignWare DMA Controller, 8 channels > [ 1.747581] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 1.775028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.782530] 0000:00:1e.4: ttyS1 at MMIO 0xdf4f2000 (irq = 19) is a 16550A > [ 1.790752] Linux agpgart interface v0.103 > [ 1.795405] [drm] Initialized drm 1.1.0 20060810 > [ 1.801740] [drm] Memory usable by graphics device = 2048M > [ 1.808151] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 1.815561] [drm] Driver supports precise vblank timestamp query. > [ 1.822391] i915 0000:00:02.0: Invalid ROM contents > [ 1.827850] [drm] failed to find VBIOS tables > [ 1.832818] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 1.861476] [drm] failed to retrieve link info, disabling eDP > [ 2.393042] fbcon: inteldrmfb (fb0) is primary device > [ 2.512443] Console: switching to colour frame buffer device 240x67 > [ 2.519200] tsc: Refined TSC clocksource calibration: 1916.666 MHz > [ 2.554517] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 2.561532] i915 0000:00:02.0: registered panic notifier > [ 2.567582] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > > [ 2.577437] loop: module loaded > [ 2.581401] ahci: SSS flag set, parallel bus scan disabled > [ 2.598138] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > [ 2.607325] ahci 0000:00:13.0: flags: 64bit ncq stag pm led clo pio slum part sxs deso sadm sds > [ 2.617742] scsi0 : ahci > [ 2.620757] scsi1 : ahci > [ 2.623716] ata1: SATA max UDMA/133 abar m2048@0xdfbf9800 port 0xdfbf9900 irq 104 > [ 2.632212] ata2: SATA max UDMA/133 abar m2048@0xdfbf9800 port 0xdfbf9980 irq 104 > [ 2.641438] tun: Universal TUN/TAP device driver, 1.6 > [ 2.647177] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 2.654300] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > [ 2.661218] e100: Copyright(c) 1999-2006 Intel Corporation > [ 2.667482] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI > [ 2.675484] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 2.682035] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [ 2.688656] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [ 2.695407] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k > [ 2.703308] igb: Copyright (c) 2007-2013 Intel Corporation. > [ 2.709665] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k > [ 2.718552] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 2.725296] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k > [ 2.734182] ixgbe: Copyright (c) 1999-2013 Intel Corporation. > [ 2.740738] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k > [ 2.751397] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 2.758339] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI > > [ 2.766437] ixgb: Copyright (c) 1999-2008 Intel Corporation. > [ 2.772909] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: > [ 2.780804] iwl4965: Copyright(c) 2003-2011 Intel Corporation > [ 2.787359] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver > [ 2.795773] usbcore: registered new interface driver pegasus > [ 2.802210] usbcore: registered new interface driver asix > [ 2.808348] usbcore: registered new interface driver ax88179_178a > [ 2.815281] usbcore: registered new interface driver cdc_ether > [ 2.821919] usbcore: registered new interface driver r815x > [ 2.828164] usbcore: registered new interface driver net1080 > [ 2.834608] usbcore: registered new interface driver cdc_subset > [ 2.841344] usbcore: registered new interface driver zaurus > [ 2.852842] usbcore: registered new interface driver cdc_ncm > [ 2.864528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.877094] ehci-pci: EHCI PCI platform driver > [ 2.887288] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.899421] ohci-pci: OHCI PCI platform driver > [ 2.909565] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.922107] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 2.933236] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 > [ 2.944963] ata1: SATA link down (SStatus 0 SControl 300) > [ 2.958474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.971303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 2.984593] usb usb1: Product: xHCI Host Controller > [ 2.995229] usb usb1: Manufacturer: Linux 3.11.0-09202013 xhci_hcd > [ 3.007323] usb usb1: SerialNumber: 0000:00:14.0 > [ 3.017873] hub 1-0:1.0: USB hub found > [ 3.027198] hub 1-0:1.0: 6 ports detected > [ 3.037223] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 3.048246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 > [ 3.061702] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 > [ 3.074424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 3.087642] usb usb2: Product: xHCI Host Controller > [ 3.098178] usb usb2: Manufacturer: Linux 3.11.0-09202013 xhci_hcd > [ 3.110160] usb usb2: SerialNumber: 0000:00:14.0 > [ 3.120594] hub 2-0:1.0: USB hub found > [ 3.129783] hub 2-0:1.0: 1 port detected > [ 3.143919] usbcore: registered new interface driver usb-storage > [ 3.155623] usbcore: registered new interface driver ums-alauda > [ 3.167170] usbcore: registered new interface driver ums-datafab > [ 3.178774] usbcore: registered new interface driver ums-freecom > [ 3.190305] usbcore: registered new interface driver ums-isd200 > [ 3.201668] usbcore: registered new interface driver ums-jumpshot > [ 3.213183] usbcore: registered new interface driver ums-karma > [ 3.224325] usbcore: registered new interface driver ums-sddr09 > [ 3.235489] usbcore: registered new interface driver ums-sddr55 > [ 3.246578] usbcore: registered new interface driver ums-usbat > [ 3.253810] ata2: SATA link down (SStatus 0 SControl 300) > [ 3.268023] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 3.398751] usb 1-2: new high-speed USB device number 2 using xhci_hcd > [ 3.414314] usb 1-2: New USB device found, idVendor=0930, idProduct=6545 > [ 3.426308] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > [ 3.438771] usb 1-2: Product: DataTraveler G3 > [ 3.448092] usb 1-2: Manufacturer: Kingston > [ 3.457170] usb 1-2: SerialNumber: 001CC0C60D71E830C00001B3 > [ 3.468209] usb-storage 1-2:1.0: USB Mass Storage device detected > [ 3.479586] scsi2 : usb-storage 1-2:1.0 > [ 3.796957] Switched to clocksource tsc > [ 3.847527] usb 1-6: new high-speed USB device number 3 using xhci_hcd > [ 3.859650] usb 1-6: New USB device found, idVendor=0424, idProduct=2640 > [ 3.871505] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > [ 3.884195] hub 1-6:1.0: USB hub found > [ 3.892683] hub 1-6:1.0: 3 ports detected > [ 4.174386] usb 1-6.1: new high-speed USB device number 4 using xhci_hcd > [ 4.193010] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040 > [ 4.204865] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 4.217184] usb 1-6.1: Product: Ultra Fast Media Reader > [ 4.227133] usb 1-6.1: Manufacturer: Generic > [ 4.235958] usb 1-6.1: SerialNumber: 000000264001 > [ 4.245656] usb-storage 1-6.1:1.0: USB Mass Storage device detected > [ 4.256790] scsi3 : usb-storage 1-6.1:1.0 > [ 4.314655] i8042: No controller found > [ 4.322979] mousedev: PS/2 mouse device common for all mice > [ 4.333693] rtc_cmos 00:00: RTC can wake from S4 > [ 4.343130] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 > [ 4.354140] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs > [ 4.366970] i2c /dev entries driver > [ 4.376039] BUG: unable to handle kernel paging request at a4003230 > [ 4.387406] IP: [<c04240b5>] __add_pin_to_irq_node+0x15/0x6a > [ 4.398146] *pde = 00000000 > [ 4.405714] Oops: 0000 [#1] PREEMPT SMP > [ 4.414434] Modules linked in: > [ 4.422132] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.11.0-09202013 #8 > [ 4.435053] task: f6070000 ti: f606e000 task.ti: f606e000 > [ 4.445435] EIP: 0060:[<c04240b5>] EFLAGS: 00010286 CPU: 2 > [ 4.455907] EIP is at __add_pin_to_irq_node+0x15/0x6a > [ 4.465892] EAX: a4003230 EBX: 00000000 ECX: 00000000 EDX: ffffffff > [ 4.477230] ESI: f61bf6b8 EDI: 00000012 EBP: f606fcc0 ESP: f606fcb0 > [ 4.481880] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS > [ 4.482250] sd 2:0:0:0: Attached scsi generic sg0 type 0 > [ 4.482739] sd 2:0:0:0: [sda] 60978816 512-byte logical blocks: (31.2 GB/29.0 GiB) > [ 4.482911] sd 2:0:0:0: [sda] Write Protect is off > [ 4.482915] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 > [ 4.483087] sd 2:0:0:0: [sda] No Caching mode page present > [ 4.483089] sd 2:0:0:0: [sda] Assuming drive cache: write through > [ 4.484879] sd 2:0:0:0: [sda] No Caching mode page present > [ 4.484881] sd 2:0:0:0: [sda] Assuming drive cache: write through > [ 4.485830] sda: sda1 sda2 > [ 4.487128] sd 2:0:0:0: [sda] No Caching mode page present > [ 4.487131] sd 2:0:0:0: [sda] Assuming drive cache: write through > [ 4.487134] sd 2:0:0:0: [sda] Attached SCSI removable disk > [ 4.627721] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 > [ 4.638027] CR0: 8005003b CR2: a4003230 CR3: 01130000 CR4: 001007d0 > [ 4.649366] Stack: > [ 4.655884] ffffffff ffffffea ffffffff f606fd28 f606fce0 c0424a3c 00000012 00000012 > [ 4.669057] f61c80d4 00000012 00000000 00000000 f606fd00 c0425714 f600a908 c113abcc > [ 4.682295] f606fd14 00000012 f606fd28 f606fd10 f606fd18 c042577e 00000012 c042577e > [ 4.695575] Call Trace: > [ 4.702860] [<c0424a3c>] io_apic_setup_irq_pin+0x2d/0x4b > [ 4.713540] [<c0425714>] io_apic_setup_irq_pin_once+0x5d/0x79 > [ 4.724722] [<c042577e>] io_apic_set_pci_routing+0x44/0x4b > [ 4.735636] [<c042577e>] ? io_apic_set_pci_routing+0x44/0x4b > [ 4.746793] [<c041f36a>] mp_register_gsi+0xbe/0xc8 > [ 4.757014] [<c041f37f>] acpi_register_gsi_ioapic+0xb/0xd > [ 4.767903] [<c041f13f>] acpi_register_gsi+0xc/0x13 > [ 4.778145] [<c06b50ed>] acpi_pci_irq_enable+0x10f/0x1d3 > [ 4.788842] [<c068db25>] ? pci_enable_resources+0x22/0xd1 > [ 4.799620] [<c09c320c>] pcibios_enable_device+0x22/0x25 > [ 4.810293] [<c09c320c>] ? pcibios_enable_device+0x22/0x25 > [ 4.821133] [<c068a31c>] do_pci_enable_device+0x25/0x3b > [ 4.831697] [<c068a3c2>] pci_enable_device_flags+0x90/0xa3 > [ 4.842555] [<c068a3e2>] pci_enable_device+0xd/0xf > [ 4.852582] [<c068a44c>] pcim_enable_device+0x68/0x85 > [ 4.862872] [<c08d4dad>] i2c_dw_pci_probe+0x3c/0x2a7 > [ 4.873070] [<c068af0a>] ? pci_match_device+0xa1/0xac > [ 4.883340] [<c068b9f8>] pci_device_probe+0x44/0x72 > [ 4.893395] [<c0772e29>] really_probe+0xc1/0x22b > [ 4.903139] [<c0b23e61>] ? __mutex_lock_slowpath+0x24c/0x26a > [ 4.914051] [<c07730c7>] driver_probe_device+0x5d/0x69 > [ 4.924406] [<c07730c7>] ? driver_probe_device+0x5d/0x69 > [ 4.934928] [<c0773116>] __driver_attach+0x43/0x5f > [ 4.944834] [<c0773116>] ? __driver_attach+0x43/0x5f > [ 4.954916] [<c0771a16>] bus_for_each_dev+0x3d/0x5e > [ 4.964863] [<c0772aa4>] driver_attach+0x17/0x1c > [ 4.974513] [<c07730d3>] ? driver_probe_device+0x69/0x69 > [ 4.984967] [<c07726fd>] bus_add_driver+0xd0/0x1eb > [ 4.994810] [<c06656fb>] ? kset_find_obj+0x5b/0x63 > [ 5.004621] [<c07734d6>] driver_register+0x72/0xdd > [ 5.014429] [<c07734d6>] ? driver_register+0x72/0xdd > [ 5.024409] [<c0773534>] ? driver_register+0xd0/0xdd > [ 5.034330] [<c068bab8>] __pci_register_driver+0x45/0x48 > [ 5.044651] [<c10cfe97>] ? dw_i2c_init_driver+0x14/0x14 > [ 5.054853] [<c10cfeab>] dw_i2c_driver_init+0x14/0x16 > [ 5.064811] [<c0400406>] do_one_initcall+0x29/0x9b > [ 5.074447] [<c109d493>] ? do_early_param+0x6f/0x6f > [ 5.084150] [<c045141c>] ? __wake_up+0x32/0x3b > [ 5.093338] [<c109d978>] ? do_basic_setup+0x69/0x98 > [ 5.103026] [<c109d98e>] do_basic_setup+0x7f/0x98 > [ 5.112521] [<c109da3e>] kernel_init_freeable+0x97/0x109 > [ 5.122672] [<c0b0c5b0>] kernel_init+0x8/0xb4 > [ 5.131691] [<c0b26837>] ret_from_kernel_thread+0x1b/0x28 > [ 5.141882] [<c0b0c5a8>] ? rest_init+0x70/0x70 > [ 5.150982] Code: f0 e8 46 17 0b 00 89 d8 ba 01 00 00 00 e8 6a 41 06 00 5b 5e 5d c3 55 89 e5 57 56 89 c6 53 89 cb 57 8b 7d 08 8b 00 89 55 f0 eb 0f <39> 18 75 05 39 78 04 74 42 8d 70 08 8b 40 08 85 c0 75 ed a1 34 > [ 5.176996] EIP: [<c04240b5>] __add_pin_to_irq_node+0x15/0x6a SS:ESP 0068:f606fcb0 > [ 5.189901] CR2: 00000000a4003230 > [ 5.197976] ---[ end trace 0d8d6036f0c4ca5a ]--- > [ 5.207489] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 > [ 5.207489] > [ 5.226405] drm_kms_helper: panic occurred, switching back to text consol > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
