[PATCH 2/2] drm/i915/vlv: use per-pipe backlight controls v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With the connector and pipe passed around, we can now set the backlight
on the right pipe on VLV/BYT.

v2: drop combination mode check for VLV (Jani)
    add save/restore code for VLV backlight regs (Jani)
    check for existing modulation freq when initializing backlight regs (Jani)

Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_drv.h     |  3 ++
 drivers/gpu/drm/i915/i915_reg.h     | 15 +++++++++
 drivers/gpu/drm/i915/i915_suspend.c | 29 ++++++++++++++++
 drivers/gpu/drm/i915/intel_panel.c  | 67 ++++++++++++++++++++++++++++++-------
 4 files changed, 102 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 53a555c..e7d211f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -718,6 +718,9 @@ struct i915_suspend_saved_registers {
 	u32 saveBLC_HIST_CTL;
 	u32 saveBLC_PWM_CTL;
 	u32 saveBLC_PWM_CTL2;
+	u32 saveBLC_HIST_CTL_B;
+	u32 saveBLC_PWM_CTL_B;
+	u32 saveBLC_PWM_CTL2_B;
 	u32 saveBLC_CPU_PWM_CTL;
 	u32 saveBLC_CPU_PWM_CTL2;
 	u32 saveFPB0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4be72b2..b64b1a6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2304,6 +2304,21 @@
 
 #define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238)
 
+#define _VLV_BLC_PWM_CTL2_A (dev_priv->info->display_mmio_offset + 0x61250)
+#define _VLV_BLC_PWM_CTL2_B (dev_priv->info->display_mmio_offset + 0x61350)
+#define VLV_BLC_PWM_CTL2(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \
+				     _VLV_BLC_PWM_CTL2_B)
+
+#define _VLV_BLC_PWM_CTL_A (dev_priv->info->display_mmio_offset + 0x61254)
+#define _VLV_BLC_PWM_CTL_B (dev_priv->info->display_mmio_offset + 0x61354)
+#define VLV_BLC_PWM_CTL(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL_A, \
+				    _VLV_BLC_PWM_CTL_B)
+
+#define _VLV_BLC_HIST_CTL_A (dev_priv->info->display_mmio_offset + 0x61260)
+#define _VLV_BLC_HIST_CTL_B (dev_priv->info->display_mmio_offset + 0x61360)
+#define VLV_BLC_HIST_CTL(pipe) _PIPE(pipe, _VLV_BLC_HIST_CTL_A, \
+				     _VLV_BLC_HIST_CTL_B)
+
 /* Backlight control */
 #define BLC_PWM_CTL2	(dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */
 #define   BLM_PWM_ENABLE		(1 << 31)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 3538370..97ca8f1 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -214,6 +214,22 @@ static void i915_save_display(struct drm_device *dev)
 		dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
 		if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
 			dev_priv->regfile.saveLVDS = I915_READ(PCH_LVDS);
+	} else if (IS_VALLEYVIEW(dev)) {
+		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
+		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+
+		dev_priv->regfile.saveBLC_PWM_CTL =
+			I915_READ(VLV_BLC_PWM_CTL(PIPE_A));
+		dev_priv->regfile.saveBLC_HIST_CTL =
+			I915_READ(VLV_BLC_HIST_CTL(PIPE_A));
+		dev_priv->regfile.saveBLC_PWM_CTL2 =
+			I915_READ(VLV_BLC_PWM_CTL2(PIPE_A));
+		dev_priv->regfile.saveBLC_PWM_CTL_B =
+			I915_READ(VLV_BLC_PWM_CTL(PIPE_B));
+		dev_priv->regfile.saveBLC_HIST_CTL_B =
+			I915_READ(VLV_BLC_HIST_CTL(PIPE_B));
+		dev_priv->regfile.saveBLC_PWM_CTL2_B =
+			I915_READ(VLV_BLC_PWM_CTL2(PIPE_B));
 	} else {
 		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
 		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
@@ -302,6 +318,19 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(PCH_PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
 		I915_WRITE(RSTDBYCTL,
 			   dev_priv->regfile.saveMCHBAR_RENDER_STANDBY);
+	} else if (IS_VALLEYVIEW(dev)) {
+		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_A),
+			   dev_priv->regfile.saveBLC_PWM_CTL);
+		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_A),
+			   dev_priv->regfile.saveBLC_HIST_CTL);
+		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_A),
+			   dev_priv->regfile.saveBLC_PWM_CTL2);
+		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_B),
+			   dev_priv->regfile.saveBLC_PWM_CTL);
+		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_B),
+			   dev_priv->regfile.saveBLC_HIST_CTL);
+		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_B),
+			   dev_priv->regfile.saveBLC_PWM_CTL2);
 	} else {
 		I915_WRITE(PFIT_PGM_RATIOS, dev_priv->regfile.savePFIT_PGM_RATIOS);
 		I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 47a8d83..58315fa 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -358,6 +358,21 @@ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev, enum pipe pipe)
 			val = dev_priv->regfile.saveBLC_PWM_CTL2;
 			I915_WRITE(BLC_PWM_PCH_CTL2, val);
 		}
+	} else if (IS_VALLEYVIEW(dev)) {
+		val = I915_READ(VLV_BLC_PWM_CTL(pipe));
+		if (dev_priv->regfile.saveBLC_PWM_CTL == 0) {
+			dev_priv->regfile.saveBLC_PWM_CTL = val;
+			dev_priv->regfile.saveBLC_PWM_CTL2 =
+				I915_READ(VLV_BLC_PWM_CTL2(pipe));
+		} else if (val == 0) {
+			val = dev_priv->regfile.saveBLC_PWM_CTL;
+			I915_WRITE(VLV_BLC_PWM_CTL(pipe), val);
+			I915_WRITE(VLV_BLC_PWM_CTL2(pipe),
+				   dev_priv->regfile.saveBLC_PWM_CTL2);
+		}
+
+		if (!val)
+			val = 0x0f42ffff;
 	} else {
 		val = I915_READ(BLC_PWM_CTL);
 		if (dev_priv->regfile.saveBLC_PWM_CTL == 0) {
@@ -372,9 +387,6 @@ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev, enum pipe pipe)
 				I915_WRITE(BLC_PWM_CTL2,
 					   dev_priv->regfile.saveBLC_PWM_CTL2);
 		}
-
-		if (IS_VALLEYVIEW(dev) && !val)
-			val = 0x0f42ffff;
 	}
 
 	return val;
@@ -435,13 +447,19 @@ static u32 intel_panel_get_backlight(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 val;
 	unsigned long flags;
+	int reg;
 
 	spin_lock_irqsave(&dev_priv->backlight.lock, flags);
 
 	if (HAS_PCH_SPLIT(dev)) {
 		val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 	} else {
-		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+		if (IS_VALLEYVIEW(dev))
+			reg = VLV_BLC_PWM_CTL(pipe);
+		else
+			reg = BLC_PWM_CTL;
+
+		val = I915_READ(reg) & BACKLIGHT_DUTY_CYCLE_MASK;
 		if (INTEL_INFO(dev)->gen < 4)
 			val >>= 1;
 
@@ -473,6 +491,7 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 tmp;
+	int reg;
 
 	DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
 	level = intel_panel_compute_brightness(dev, pipe, level);
@@ -493,11 +512,16 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev,
 		pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
 	}
 
-	tmp = I915_READ(BLC_PWM_CTL);
+	if (IS_VALLEYVIEW(dev))
+		reg = VLV_BLC_PWM_CTL(pipe);
+	else
+		reg = BLC_PWM_CTL;
+
+	tmp = I915_READ(reg);
 	if (INTEL_INFO(dev)->gen < 4)
 		level <<= 1;
 	tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
-	I915_WRITE(BLC_PWM_CTL, tmp | level);
+	I915_WRITE(reg, tmp | level);
 }
 
 /* set backlight brightness to level in range [0..max] */
@@ -566,7 +590,12 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
 	if (INTEL_INFO(dev)->gen >= 4) {
 		uint32_t reg, tmp;
 
-		reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
+		if (HAS_PCH_SPLIT(dev))
+			reg = BLC_PWM_CPU_CTL2;
+		else if (IS_VALLEYVIEW(dev))
+			reg = VLV_BLC_PWM_CTL2(pipe);
+		else
+			reg = BLC_PWM_CTL2;
 
 		I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE);
 
@@ -605,8 +634,12 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
 	if (INTEL_INFO(dev)->gen >= 4) {
 		uint32_t reg, tmp;
 
-		reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
-
+		if (HAS_PCH_SPLIT(dev))
+			reg = BLC_PWM_CPU_CTL2;
+		else if (IS_VALLEYVIEW(dev))
+			reg = VLV_BLC_PWM_CTL2(pipe);
+		else
+			reg = BLC_PWM_CTL2;
 
 		tmp = I915_READ(reg);
 
@@ -658,9 +691,19 @@ static void intel_panel_init_backlight_regs(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (IS_VALLEYVIEW(dev)) {
-		u32 cur_val = I915_READ(BLC_PWM_CTL) &
-			BACKLIGHT_DUTY_CYCLE_MASK;
-		I915_WRITE(BLC_PWM_CTL, (0xf42 << 16) | cur_val);
+		enum pipe pipe;
+
+		for_each_pipe(pipe) {
+			u32 cur_val = I915_READ(VLV_BLC_PWM_CTL(pipe));
+
+			/* Skip if the modulation freq is already set */
+			if (cur_val & ~BACKLIGHT_DUTY_CYCLE_MASK)
+				continue;
+
+			cur_val &= BACKLIGHT_DUTY_CYCLE_MASK;
+			I915_WRITE(VLV_BLC_PWM_CTL(pipe), (0xf42 << 16) |
+				   cur_val);
+		}
 	}
 }
 
-- 
1.8.3.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux