We need to use the clock control reg to figure out how many CZ clks are in 30ns and use that as the basis for our RC6 residency calculations. References: https://bugs.freedesktop.org/show_bug.cgi?id=69692 Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/i915_sysfs.c | 22 ++++++++++++++++++++-- 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cf995bb..6f8d0cf 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1797,6 +1797,9 @@ */ #define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE) +#define VLV_CLK_CTL2 0x101104 +#define CLK_CTL2_CZCOUNT_30NS_SHIFT 28 + /* * Overlay regs */ diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c index 44f4c1a..9c60515 100644 --- a/drivers/gpu/drm/i915/i915_sysfs.c +++ b/drivers/gpu/drm/i915/i915_sysfs.c @@ -37,12 +37,30 @@ static u32 calc_residency(struct drm_device *dev, const u32 reg) { struct drm_i915_private *dev_priv = dev->dev_private; u64 raw_time; /* 32b value may overflow during fixed point math */ + u64 units = 128ULL, div = 100000ULL; if (!intel_enable_rc6(dev)) return 0; - raw_time = I915_READ(reg) * 128ULL; - return DIV_ROUND_UP_ULL(raw_time, 100000); + /* On VLV, residency time is in CZ units rather than 1.28us */ + if (IS_VALLEYVIEW(dev)) { + u32 clkctl2; + + clkctl2 = I915_READ(VLV_CLK_CTL2) >> + CLK_CTL2_CZCOUNT_30NS_SHIFT; + if (!clkctl2) { + WARN(!clkctl2, "bogus CZ count value"); + return 0; + } + units = DIV_ROUND_UP_ULL(3000ULL, (u64)clkctl2); + if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH) + units <<= 8; + + div = 100000000; + } + + raw_time = I915_READ(reg) * units; + return DIV_ROUND_UP_ULL(raw_time, div); } static ssize_t -- 1.8.3.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
