Hi,
Is it okay to integrate this patch at first?
We can check whether vblank wait can be removed safely later
Thanks
Mengdong
> -----Original Message-----
> From: Lin, Mengdong
> Sent: Tuesday, September 24, 2013 1:01 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Arora, MukeshX; Lin, Mengdong
> Subject: [PATCH v3 1/2] drm/i915/hsw: Add display Audio codec disable
> sequence for Haswell
>
> From: Mukesh <mukeshx.arora@xxxxxxxxx>
>
> The code defines a new function intel_disable_audio() to implement the entire
> audio codec disable sequence, called by intel_disable_ddi() in DDI port
> disablement. This audio codec disbale sequence is implemented as per the
> recommendation of the Bspec.
>
> [Patch modified by Mendong to apply to both HDMI and DP port.]
>
> Signed-off-by: Mukesh Arora <mukeshx.arora@xxxxxxxxx>
> Signed-off-by: Mengdong Lin <mengdong.lin@xxxxxxxxx>
> Reviewed-by: Ben Widawsky <ben@xxxxxxxxxxxx>
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index b042ee5..bda9181 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1088,6 +1088,50 @@ static void intel_ddi_post_disable(struct
> intel_encoder *intel_encoder)
> I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); }
>
> +/* audio codec disable sequence, as per Bspec */ void
> +intel_disable_audio(struct intel_encoder *intel_encoder) {
> + int type = intel_encoder->type;
> + struct drm_encoder *encoder = &intel_encoder->base;
> + struct drm_device *dev = encoder->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> + int pipe = intel_crtc->pipe;
> + int aud_config = HSW_AUD_CFG(pipe);
> + u32 temp;
> +
> + /* need not disable sample fabrication because never enabled */
> +
> + /* disable timestamps */
> + temp = I915_READ(aud_config);
> + if (type == INTEL_OUTPUT_HDMI)
> + temp &= ~AUD_CONFIG_N_VALUE_INDEX;
> + else if (type == INTEL_OUTPUT_DISPLAYPORT)
> + temp |= AUD_CONFIG_N_VALUE_INDEX;
> + else
> + return;
> + temp |= AUD_CONFIG_N_PROG_ENABLE;
> + temp &=
> ~(AUD_CONFIG_UPPER_N_VALUE|AUD_CONFIG_LOWER_N_VALUE);
> + I915_WRITE(aud_config, temp);
> + POSTING_READ(aud_config);
> +
> + /* Disable ELDV and ELD buffer */
> + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> + temp &= ~(AUDIO_ELD_VALID_A << (pipe * 4));
> + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, temp);
> + POSTING_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +
> + /* Wait for 2 vertical blanks */
> + intel_wait_for_vblank(dev, pipe);
> + intel_wait_for_vblank(dev, pipe);
> +
> + /* Disable audio PD. This is optional as per Bspec. */
> + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> + temp &= ~(AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
> + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, temp);
> + POSTING_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +}
> +
> static void intel_enable_ddi(struct intel_encoder *intel_encoder) {
> struct drm_encoder *encoder = &intel_encoder->base; @@ -1132,18
> +1176,10 @@ static void intel_disable_ddi(struct intel_encoder
> *intel_encoder)
> struct drm_encoder *encoder = &intel_encoder->base;
> struct drm_crtc *crtc = encoder->crtc;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - int pipe = intel_crtc->pipe;
> int type = intel_encoder->type;
> - struct drm_device *dev = encoder->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - uint32_t tmp;
>
> - if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) {
> - tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> - tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) <<
> - (pipe * 4));
> - I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
> - }
> + if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP)
> + intel_disable_audio(intel_encoder);
>
> if (type == INTEL_OUTPUT_EDP) {
> struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> --
> 1.8.1.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
