CDCLK is used to generate the gmbus clock. This is normally done by
BIOS. Program the value if the BIOS-less system doesn't do it.
v2: Move this to intel_i2c_reset to allow reprogram the gmbus frequency
during resume. (Daniel)
v3: Change GMBUS_FREQ to GMBUSFREQ_VLV, and use VLV_DISPLAY_BASE.
(Ville).
Remove cdclk_ratio[] table, and calculate the cdclk ratio instead.
(Ville).
Change the shift then mask for reg read, to mask first, then shift.
(Ville).
Remove the gmbus frequency calculation = cdclk/1.01. Based on BIOS
programming, gmbus frequency = cdclk frequency. (Ville)
Add get_disp_clk_div, which can use to get cdclk/czclk divide.
Signed-off-by: Chon Ming Lee <chon.ming.lee@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 8 +++++
drivers/gpu/drm/i915/intel_i2c.c | 60 ++++++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c02f893..e8315c6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -391,6 +391,8 @@
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
/* vlv2 north clock has */
+#define CCK_FUSE_REG 0x8
+#define CCK_FUSE_HPLL_FREQ_MASK 0x3
#define CCK_REG_DSI_PLL_FUSE 0x44
#define CCK_REG_DSI_PLL_CONTROL 0x48
#define DSI_PLL_VCO_EN (1 << 31)
@@ -1438,6 +1440,12 @@
#define MI_ARB_VLV (VLV_DISPLAY_BASE + 0x6504)
+#define CZCLK_CDCLK_FREQ_RATIO (dev_priv->info->display_mmio_offset + 0x6508)
+#define CDCLK_FREQ_SHIFT 4
+#define CDCLK_FREQ_MASK (0x1f << CDCLK_FREQ_SHIFT)
+#define CZCLK_FREQ_MASK 0xf
+#define GMBUSFREQ_VLV (VLV_DISPLAY_BASE + 0x6510)
+
/*
* Palette regs
*/
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d1c1e0f7..b225d60 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -34,6 +34,11 @@
#include <drm/i915_drm.h>
#include "i915_drv.h"
+enum disp_clk {
+ CDCLK = 0,
+ CZCLK
+};
+
struct gmbus_port {
const char *name;
int reg;
@@ -58,10 +63,65 @@ to_intel_gmbus(struct i2c_adapter *i2c)
return container_of(i2c, struct intel_gmbus, adapter);
}
+static int get_disp_clk_div(struct drm_i915_private *dev_priv, enum disp_clk clk)
+{
+ u32 reg_val;
+ int clk_ratio;
+
+ reg_val = I915_READ(CZCLK_CDCLK_FREQ_RATIO);
+
+ if (clk == CDCLK)
+ clk_ratio = ((reg_val & CDCLK_FREQ_MASK) >> CDCLK_FREQ_SHIFT) + 1;
+ else
+ clk_ratio = (reg_val & CZCLK_FREQ_MASK) + 1;
+
+ return clk_ratio * 5;
+}
+
+static void gmbus_set_freq(struct drm_i915_private *dev_priv)
+{
+ int vco_freq[] = { 800, 1600, 2000, 2400 };
+ int gmbus_freq = 0, cdclk_div, hpll_freq;
+ u32 reg_val;
+
+ BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
+
+ /* Skip setting the gmbus freq if BIOS has already programmed it */
+ if (I915_READ(GMBUSFREQ_VLV) != 0xA0)
+ return;
+
+ /* Obtain SKU information to determine the correct CDCLK */
+ mutex_lock(&dev_priv->dpio_lock);
+ reg_val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ hpll_freq = reg_val & CCK_FUSE_HPLL_FREQ_MASK;
+
+ /* Get the CDCLK divide ratio */
+ cdclk_div = get_disp_clk_div(dev_priv, CDCLK);
+
+ /* Program the gmbus_freq based on the cdclk frequency */
+ if (cdclk_div)
+ gmbus_freq = vco_freq[hpll_freq] * 10 / cdclk_div;
+
+ WARN_ON(gmbus_freq == 0);
+
+ if (gmbus_freq != 0)
+ I915_WRITE(GMBUSFREQ_VLV, gmbus_freq);
+
+}
+
void
intel_i2c_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* In BIOS-less system, program the correct gmbus frequency
+ * before reading edid.
+ */
+ if (IS_VALLEYVIEW(dev))
+ gmbus_set_freq(dev_priv);
+
I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0);
I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0);
}
--
1.7.7.6
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
