When using the frame packing and a single big framebuffer, some hardware
requires that we do everything like if we were scanning out the big
buffer itself. Let's instrument drm_mode_set_crtcinfo() to be able to do
this adjustement if the driver is asking for it.
v2: Use crtc_vtotal and multiply the clock by 2 instead of
reconstructing it (Ville Syrjälä)
Suggested-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
---
drivers/gpu/drm/drm_modes.c | 22 +++++++++++++++++++++-
include/drm/drm_crtc.h | 3 ++-
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index ef26eb2..b073315 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -707,12 +707,18 @@ EXPORT_SYMBOL(drm_mode_vrefresh);
/**
* drm_mode_set_crtcinfo - set CRTC modesetting parameters
* @p: mode
- * @adjust_flags: unused? (FIXME)
+ * @adjust_flags: a combination of adjustment flags
*
* LOCKING:
* None.
*
* Setup the CRTC modesetting parameters for @p, adjusting if necessary.
+ *
+ * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of
+ * interlaced modes.
+ * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for
+ * buffers containing two eyes (only adjust the timings when needed, eg. for
+ * "frame packing" or "side by side full").
*/
void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
{
@@ -753,6 +759,20 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
p->crtc_vtotal *= p->vscan;
}
+ if (adjust_flags & CRTC_STEREO_DOUBLE) {
+ unsigned int layout = p->flags & DRM_MODE_FLAG_3D_MASK;
+
+ switch (layout) {
+ case DRM_MODE_FLAG_3D_FRAME_PACKING:
+ p->crtc_clock *= 2;
+ p->crtc_vdisplay += p->crtc_vtotal;
+ p->crtc_vsync_start += p->crtc_vtotal;
+ p->crtc_vsync_end += p->crtc_vtotal;
+ p->crtc_vtotal += p->crtc_vtotal;
+ break;
+ }
+ }
+
p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay);
p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal);
p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 73478bc..b2d08ca 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -125,7 +125,8 @@ enum drm_mode_status {
.vscan = (vs), .flags = (f), \
.base.type = DRM_MODE_OBJECT_MODE
-#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
+#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
+#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
struct drm_display_mode {
/* Header */
--
1.8.3.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
