From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
We have all the information we need in the mode structure, so going and
reading it from the hardware is pointless, and slower.
We never populated ->get_vblank_timestamp() in the UMS case, and as that
is the only way we'd ever call ->get_scanout_position(), we can
completely ignore UMS in i915_get_crtc_scanoutpos().
Also reorganize intel_irq_init() a bit to clarify the KMS vs. UMS
situation.
v2: Drop UMS code
Cc: Mario Kleiner <mario.kleiner@xxxxxxxxxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_irq.c | 43 ++++++++++++++++-------------------------
1 file changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b356dc1..058f099 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -570,24 +570,29 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int *vpos, int *hpos)
{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 vbl = 0, position = 0;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ const struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
+ u32 position;
int vbl_start, vbl_end, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
- enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
- pipe);
- if (!i915_pipe_enabled(dev, pipe)) {
+ if (!intel_crtc->active) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
- /* Get vtotal. */
- vtotal = 1 + ((I915_READ(VTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
+ htotal = mode->crtc_htotal;
+ vtotal = mode->crtc_vtotal;
+ vbl_start = mode->crtc_vblank_start;
+ vbl_end = mode->crtc_vblank_end;
- if (INTEL_INFO(dev)->gen >= 4) {
+ ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
+
+ if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
@@ -605,29 +610,16 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
*/
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
- htotal = 1 + ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
- /* Query vblank area. */
- vbl = I915_READ(VBLANK(cpu_transcoder));
-
- /* Test position against vblank region. */
- vbl_start = vbl & 0x1fff;
- vbl_end = (vbl >> 16) & 0x1fff;
-
- if ((*vpos < vbl_start) || (*vpos > vbl_end))
- in_vbl = false;
+ in_vbl = *vpos >= vbl_start && *vpos < vbl_end;
/* Inside "upper part" of vblank area? Apply corrective offset: */
if (in_vbl && (*vpos >= vbl_start))
*vpos = *vpos - vtotal;
- /* Readouts valid? */
- if (vbl > 0)
- ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
-
/* In vblank? */
if (in_vbl)
ret |= DRM_SCANOUTPOS_INVBL;
@@ -3148,11 +3140,10 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
- if (drm_core_check_feature(dev, DRIVER_MODESET))
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
- else
- dev->driver->get_vblank_timestamp = NULL;
- dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
+ dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
+ }
if (IS_VALLEYVIEW(dev)) {
dev->driver->irq_handler = valleyview_irq_handler;
--
1.8.1.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
