Register access is particularly obnoxious on Sandybridge and later due to
the extra work we must do around every read or write. The effect is
magnified on Haswell, as we have per-operation sanity checking
magnifying the number of reads and writes.
Interrupt handling is supposed to be fast, yet due to the sanity checks
around the register accesss it is not as fast as it could be. If we look
closer, most of the common register operations are reading values we
already know, and redundant flushes. Eliminate these by storing the
desired values rather than reading them back during the interrupt
routine.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 4 ++--
drivers/gpu/drm/i915/i915_irq.c | 22 ++++++++--------------
2 files changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index db8e4d0..f182a23 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1259,8 +1259,8 @@ typedef struct drm_i915_private {
/* DPIO indirect register protection */
struct mutex dpio_lock;
- /** Cached value of IMR to avoid reads in updating the bitfield */
- u32 irq_mask;
+ /** Cached value of IMR/IER to avoid reads in updating the bitfield */
+ u32 irq_mask, irq_enable;
u32 gt_irq_mask;
u32 pm_irq_mask;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index d9eebca..76725c6 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1428,7 +1428,7 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 de_iir, gt_iir, de_ier, sde_ier = 0;
+ u32 de_iir, gt_iir;
irqreturn_t ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
@@ -1438,20 +1438,15 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
intel_uncore_check_errors(dev);
/* disable master interrupt before clearing iir */
- de_ier = I915_READ(DEIER);
- I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
- POSTING_READ(DEIER);
+ I915_WRITE(DEIER, dev_priv->irq_enable & ~DE_MASTER_IRQ_CONTROL);
/* Disable south interrupts. We'll only write to SDEIIR once, so further
* interrupts will will be stored on its back queue, and then we'll be
* able to process them after we restore SDEIER (as soon as we restore
* it, we'll get an interrupt if SDEIIR still has something to process
* due to its back queue). */
- if (!HAS_PCH_NOP(dev)) {
- sde_ier = I915_READ(SDEIER);
+ if (!HAS_PCH_NOP(dev))
I915_WRITE(SDEIER, 0);
- POSTING_READ(SDEIER);
- }
gt_iir = I915_READ(GTIIR);
if (gt_iir) {
@@ -1482,12 +1477,10 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
}
}
- I915_WRITE(DEIER, de_ier);
+ if (!HAS_PCH_NOP(dev))
+ I915_WRITE(SDEIER, ~0);
+ I915_WRITE(DEIER, dev_priv->irq_enable);
POSTING_READ(DEIER);
- if (!HAS_PCH_NOP(dev)) {
- I915_WRITE(SDEIER, sde_ier);
- POSTING_READ(SDEIER);
- }
return ret;
}
@@ -2343,11 +2336,12 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
}
dev_priv->irq_mask = ~display_mask;
+ dev_priv->irq_enable = display_mask | extra_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask);
- I915_WRITE(DEIER, display_mask | extra_mask);
+ I915_WRITE(DEIER, dev_priv->irq_enable);
POSTING_READ(DEIER);
gen5_gt_irq_postinstall(dev);
--
1.8.4.rc3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
