From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
No functional change.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 144 +++++++++++++++++------------------
1 file changed, 72 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 72c0c38..6cd0c1b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3283,6 +3283,78 @@ static void intel_disable_planes(struct drm_crtc *crtc)
intel_plane_disable(&intel_plane->base);
}
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+{
+ if (!enable && intel_crtc->overlay) {
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&dev->struct_mutex);
+ dev_priv->mm.interruptible = false;
+ (void) intel_overlay_switch_off(intel_crtc->overlay);
+ dev_priv->mm.interruptible = true;
+ mutex_unlock(&dev->struct_mutex);
+ }
+
+ /* Let userspace switch the overlay on again. In most cases userspace
+ * has to recompute where to put it anyway.
+ */
+}
+
+/**
+ * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
+ * cursor plane briefly if not already running after enabling the display
+ * plane.
+ * This workaround avoids occasional blank screens when self refresh is
+ * enabled.
+ */
+static void
+g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ u32 cntl = I915_READ(CURCNTR(pipe));
+
+ if ((cntl & CURSOR_MODE) == 0) {
+ u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
+
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
+ I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
+ intel_wait_for_vblank(dev_priv->dev, pipe);
+ I915_WRITE(CURCNTR(pipe), cntl);
+ I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self);
+ }
+}
+
+static void hsw_enable_ips(struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+
+ if (!crtc->config.ips_enabled)
+ return;
+
+ /* We can only enable IPS after we enable a plane and wait for a vblank.
+ * We guarantee that the plane is enabled by calling intel_enable_ips
+ * only after intel_enable_plane. And intel_enable_plane already waits
+ * for a vblank, so all we need to do here is to enable the IPS bit. */
+ assert_plane_enabled(dev_priv, crtc->plane);
+ I915_WRITE(IPS_CTL, IPS_ENABLE);
+}
+
+static void hsw_disable_ips(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (!crtc->config.ips_enabled)
+ return;
+
+ assert_plane_enabled(dev_priv, crtc->plane);
+ I915_WRITE(IPS_CTL, 0);
+
+ /* We need to wait for a vblank before we can disable the plane. */
+ intel_wait_for_vblank(dev, crtc->pipe);
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3361,36 +3433,6 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-static void hsw_enable_ips(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
-
- if (!crtc->config.ips_enabled)
- return;
-
- /* We can only enable IPS after we enable a plane and wait for a vblank.
- * We guarantee that the plane is enabled by calling intel_enable_ips
- * only after intel_enable_plane. And intel_enable_plane already waits
- * for a vblank, so all we need to do here is to enable the IPS bit. */
- assert_plane_enabled(dev_priv, crtc->plane);
- I915_WRITE(IPS_CTL, IPS_ENABLE);
-}
-
-static void hsw_disable_ips(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (!crtc->config.ips_enabled)
- return;
-
- assert_plane_enabled(dev_priv, crtc->plane);
- I915_WRITE(IPS_CTL, 0);
-
- /* We need to wait for a vblank before we can disable the plane. */
- intel_wait_for_vblank(dev, crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3621,48 +3663,6 @@ static void haswell_crtc_off(struct drm_crtc *crtc)
intel_ddi_put_crtc_pll(crtc);
}
-static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
-{
- if (!enable && intel_crtc->overlay) {
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- mutex_lock(&dev->struct_mutex);
- dev_priv->mm.interruptible = false;
- (void) intel_overlay_switch_off(intel_crtc->overlay);
- dev_priv->mm.interruptible = true;
- mutex_unlock(&dev->struct_mutex);
- }
-
- /* Let userspace switch the overlay on again. In most cases userspace
- * has to recompute where to put it anyway.
- */
-}
-
-/**
- * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
- * cursor plane briefly if not already running after enabling the display
- * plane.
- * This workaround avoids occasional blank screens when self refresh is
- * enabled.
- */
-static void
-g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
- u32 cntl = I915_READ(CURCNTR(pipe));
-
- if ((cntl & CURSOR_MODE) == 0) {
- u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
-
- I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
- I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
- intel_wait_for_vblank(dev_priv->dev, pipe);
- I915_WRITE(CURCNTR(pipe), cntl);
- I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
- I915_WRITE(FW_BLC_SELF, fw_bcl_self);
- }
-}
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
--
1.8.1.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
