On Fri, 13 Sep 2013, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> We already extract the DPLL state to pipe_config, so let's make use of
> it in i9xx_crtc_clock_get() and avoid the register reads.
>
> This will also make the function closer to being useable with PCH DPLL
> since the registers for those live in a different address.
>
> Also kill the useless adjusted_mode.clock zeroing. It's already zero at
> this point.
>
> v2: Read out DPLL state in intel_crtc_mode_get()
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_display.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 13dea9b..ad7f8a7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7326,14 +7326,14 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> int pipe = pipe_config->cpu_transcoder;
> - u32 dpll = I915_READ(DPLL(pipe));
> + u32 dpll = pipe_config->dpll_hw_state.dpll;
> u32 fp;
> intel_clock_t clock;
>
> if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
> - fp = I915_READ(FP0(pipe));
> + fp = pipe_config->dpll_hw_state.fp0;
> else
> - fp = I915_READ(FP1(pipe));
> + fp = pipe_config->dpll_hw_state.fp1;
>
> clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
> if (IS_PINEVIEW(dev)) {
> @@ -7364,7 +7364,6 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
> default:
> DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
> "mode\n", (int)(dpll & DPLL_MODE_MASK));
> - pipe_config->adjusted_mode.clock = 0;
> return;
> }
>
> @@ -7464,6 +7463,7 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> int hsync = I915_READ(HSYNC(cpu_transcoder));
> int vtot = I915_READ(VTOTAL(cpu_transcoder));
> int vsync = I915_READ(VSYNC(cpu_transcoder));
> + enum pipe pipe = intel_crtc->pipe;
>
> mode = kzalloc(sizeof(*mode), GFP_KERNEL);
> if (!mode)
> @@ -7476,8 +7476,11 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
> * to use a real value here instead.
> */
> - pipe_config.cpu_transcoder = (enum transcoder) intel_crtc->pipe;
> + pipe_config.cpu_transcoder = (enum transcoder) pipe;
> pipe_config.pixel_multiplier = 1;
> + pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
> + pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
> + pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
> i9xx_crtc_clock_get(intel_crtc, &pipe_config);
>
> mode->clock = pipe_config.adjusted_mode.clock;
> --
> 1.8.1.5
>
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
