Starting from DP2.0 specs, DPCD 248h is renamed
LINK_QUAL_PATTERN_SELECT and it has the same values of registers
DPCD 10Bh-10Eh.
Use the PHY pattern names defined for DPCD 10Bh-10Eh in order to add
CP2520 Pattern 3 (TPS4) phy pattern support in the next
patch of this series and DP2.1 PHY patterns for future series.
CC: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 0cc57681dc4d..08b607288a6a 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3882,27 +3882,27 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
u32 pattern_val;
switch (data->phy_pattern) {
- case DP_PHY_TEST_PATTERN_NONE:
+ case DP_LINK_QUAL_PATTERN_DISABLE:
drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
break;
- case DP_PHY_TEST_PATTERN_D10_2:
+ case DP_LINK_QUAL_PATTERN_D10_2:
drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
break;
- case DP_PHY_TEST_PATTERN_ERROR_COUNT:
+ case DP_LINK_QUAL_PATTERN_ERROR_RATE:
drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE |
DDI_DP_COMP_CTL_SCRAMBLED_0);
break;
- case DP_PHY_TEST_PATTERN_PRBS7:
+ case DP_LINK_QUAL_PATTERN_PRBS7:
drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n");
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
break;
- case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+ case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM:
/*
* FIXME: Ideally pattern should come from DPCD 0x250. As
* current firmware of DPR-100 could not set it, so hardcoding
@@ -3920,7 +3920,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
DDI_DP_COMP_CTL_ENABLE |
DDI_DP_COMP_CTL_CUSTOM80);
break;
- case DP_PHY_TEST_PATTERN_CP2520:
+ case DP_LINK_QUAL_PATTERN_CP2520_PAT_1:
/*
* FIXME: Ideally pattern should come from DPCD 0x24A. As
* current firmware of DPR-100 could not set it, so hardcoding
--
2.34.1
