Re: [RFC PATCH 2/3] drm/i915: clean up power sequencing register port select definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 03, 2013 at 02:43:38PM +0300, Jani Nikula wrote:
> Remove dupes, add VLV port B.
> 
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |    7 +------
>  drivers/gpu/drm/i915/intel_dp.c |    4 ++--
>  2 files changed, 3 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c7f2da3..accbd1f 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4449,6 +4449,7 @@
>  #define PIPEA_PP_STATUS         (VLV_DISPLAY_BASE + 0x61200)
>  #define PIPEA_PP_CONTROL        (VLV_DISPLAY_BASE + 0x61204)
>  #define PIPEA_PP_ON_DELAYS      (VLV_DISPLAY_BASE + 0x61208)
> +#define  PANEL_PORT_SELECT_DPB_VLV	(1 << 30)

The DPC value is the same as on other platforms, but since the
other values are not valid for VLV it might be a bit cleaner to
define also DPC_VLV here. I'm won't insist though if you don't
want it there.

>  #define PIPEA_PP_OFF_DELAYS     (VLV_DISPLAY_BASE + 0x6120c)
>  #define PIPEA_PP_DIVISOR        (VLV_DISPLAY_BASE + 0x61210)
>  
> @@ -4480,7 +4481,6 @@
>  #define  PANEL_PORT_SELECT_MASK	(3 << 30)
>  #define  PANEL_PORT_SELECT_LVDS	(0 << 30)
>  #define  PANEL_PORT_SELECT_DPA	(1 << 30)
> -#define  EDP_PANEL		(1 << 30)

Hmm. Yeah, the EDP bit is there only for CTG, and we don't do eDP on
CTG. I must assume such hardware never existed.

So w/ or w/o the DPC_VLV thing:
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

>  #define  PANEL_PORT_SELECT_DPC	(2 << 30)
>  #define  PANEL_PORT_SELECT_DPD	(3 << 30)
>  #define  PANEL_POWER_UP_DELAY_MASK	(0x1fff0000)
> @@ -4489,11 +4489,6 @@
>  #define  PANEL_LIGHT_ON_DELAY_SHIFT	0
>  
>  #define PCH_PP_OFF_DELAYS	0xc720c
> -#define  PANEL_POWER_PORT_SELECT_MASK	(0x3 << 30)
> -#define  PANEL_POWER_PORT_LVDS		(0 << 30)
> -#define  PANEL_POWER_PORT_DP_A		(1 << 30)
> -#define  PANEL_POWER_PORT_DP_C		(2 << 30)
> -#define  PANEL_POWER_PORT_DP_D		(3 << 30)
>  #define  PANEL_POWER_DOWN_DELAY_MASK	(0x1fff0000)
>  #define  PANEL_POWER_DOWN_DELAY_SHIFT	16
>  #define  PANEL_LIGHT_OFF_DELAY_MASK	(0x1fff)
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index adbe7bc..0ba72f1 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3281,9 +3281,9 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>  		port_sel = I915_READ(pp_on_reg) & 0xc0000000;
>  	} else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
>  		if (dp_to_dig_port(intel_dp)->port == PORT_A)
> -			port_sel = PANEL_POWER_PORT_DP_A;
> +			port_sel = PANEL_PORT_SELECT_DPA;
>  		else
> -			port_sel = PANEL_POWER_PORT_DP_D;
> +			port_sel = PANEL_PORT_SELECT_DPD;
>  	}
>  
>  	pp_on |= port_sel;
> -- 
> 1.7.9.5

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux