Re: [PATCH] drm/i915: Implement UHBR bandwidth check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 27, 2023 at 01:20:30PM +0200, Stanislav Lisovskiy wrote:
> According to spec, we should check if output_bpp * pixel_rate is less
> than DDI clock * 72, if UHBR is used.
> 
> v2: - s/pipe_config/crtc_state/ (Jani Nikula)
>     - Merged previous patch into that one, to remove empty function(Jani Nikula)
> 
> HSDES: 1406899791
> BSPEC: 49259
> 
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 28 +++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index a860cbc5dbea..d0e2e37cd758 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -45,6 +45,26 @@
>  #include "intel_hotplug.h"
>  #include "skl_scaler.h"
>  
> +static int intel_dp_mst_check_constraints(struct drm_i915_private *i915, int bpp,
> +					  const struct drm_display_mode *adjusted_mode,
> +					  struct intel_crtc_state *crtc_state)
> +{
> +	if (intel_dp_is_uhbr(crtc_state)) {
> +		int output_bpp = bpp;
> +		/* DisplayPort 2 128b/132b, bits per lane is always 32 */
> +		int symbol_clock = crtc_state->port_clock / 32;
> +
> +		if (output_bpp * adjusted_mode->crtc_clock >=
> +		    symbol_clock * 72) {
> +			drm_dbg_kms(&i915->drm, "UHBR check failed(required bw %d available %d)\n",
> +				    output_bpp * adjusted_mode->crtc_clock, symbol_clock * 72);
> +			return -EINVAL;
> +		}

You're still doing this for non-DSC as well. Did we get any
clarification whether that is correct or not?

> +	}
> +
> +	return 0;
> +}
> +
>  static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
>  						struct intel_crtc_state *crtc_state,
>  						int max_bpp,
> @@ -87,6 +107,10 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
>  
>  		drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp);
>  
> +		ret = intel_dp_mst_check_constraints(i915, bpp, adjusted_mode, crtc_state);
> +		if (ret)
> +			continue;
> +
>  		slots = drm_dp_atomic_find_time_slots(state, &intel_dp->mst_mgr,
>  						      connector->port,
>  						      crtc_state->pbn);
> @@ -104,8 +128,8 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
>  		}
>  	}
>  
> -	/* Despite slots are non-zero, we still failed the atomic check */
> -	if (ret && slots >= 0)
> +	/* We failed to find a proper bpp/timeslots, return error */
> +	if (ret)
>  		slots = ret;
>  
>  	if (slots < 0) {
> -- 
> 2.37.3

-- 
Ville Syrjälä
Intel



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux