DPLL is not needed for DSI
v2: Rebase due to added DSI PLL assertion patch.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 48 ++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2264a13..336bee4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3683,7 +3683,8 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
- vlv_enable_pll(intel_crtc);
+ if (!is_dsi)
+ vlv_enable_pll(intel_crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_enable)
@@ -3798,7 +3799,8 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
if (encoder->post_disable)
encoder->post_disable(encoder);
- i9xx_disable_pll(dev_priv, pipe);
+ if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
+ i9xx_disable_pll(dev_priv, pipe);
intel_crtc->active = false;
intel_update_fbc(dev);
@@ -4866,7 +4868,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
intel_clock_t clock, reduced_clock;
u32 dspcntr;
bool ok, has_reduced_clock = false;
- bool is_lvds = false;
+ bool is_lvds = false, is_dsi = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
int ret;
@@ -4876,6 +4878,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
+ case INTEL_OUTPUT_DSI:
+ is_dsi = true;
+ break;
}
num_connectors++;
@@ -4883,18 +4888,21 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
refclk = i9xx_get_refclk(crtc, num_connectors);
- /*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE. The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- */
- limit = intel_limit(crtc, refclk);
- ok = dev_priv->display.find_dpll(limit, crtc,
- intel_crtc->config.port_clock,
- refclk, NULL, &clock);
- if (!ok && !intel_crtc->config.clock_set) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
- return -EINVAL;
+ if (!is_dsi) {
+ /*
+ * Returns a set of divisors for the desired target clock with
+ * the given refclk, or FALSE. The returned values represent
+ * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
+ * 2) / p1 / p2.
+ */
+ limit = intel_limit(crtc, refclk);
+ ok = dev_priv->display.find_dpll(limit, crtc,
+ intel_crtc->config.port_clock,
+ refclk, NULL, &clock);
+ if (!ok && !intel_crtc->config.clock_set) {
+ DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ return -EINVAL;
+ }
}
/* Ensure that the cursor is valid for the new mode before changing... */
@@ -4922,16 +4930,18 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
intel_crtc->config.dpll.p2 = clock.p2;
}
- if (IS_GEN2(dev))
+ if (IS_GEN2(dev)) {
i8xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
- else if (IS_VALLEYVIEW(dev))
- vlv_update_pll(intel_crtc);
- else
+ } else if (IS_VALLEYVIEW(dev)) {
+ if (!is_dsi)
+ vlv_update_pll(intel_crtc);
+ } else {
i9xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
+ }
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
