From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Currently we are always switching to the idle pattern after the
link training, but we don't always wait for the minimum number
of idle patterns sent. That doesn't look to be what Bspec
asks of us.
According to bspec what we should do is switch to idle pattern
and wait for it only in DP1.4 MST cases. In all other cases we
should apparently do neither.
What confuses matters further is that the port sync SST sequence
asks us to "stay in idle pattern". But if we never switched to it
how can we stay in it? This still needs further clarificaiton.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 4af2ba2dfcad..a3466b71d18a 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3219,24 +3219,22 @@ static void intel_ddi_set_idle_link_train(struct intel_dp *intel_dp,
{
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- enum port port = encoder->port;
u32 val;
+ /*
+ * FIXME DP modeset sequence says to switch to idle pattern
+ * only for DP1.4 MST cases, but port sync SST sequence asks
+ * us to "stay in Idle Pattern", implying that we should
+ * switch to it earlier. Which is it?
+ */
+ if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))
+ return;
+
val = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state));
val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
val |= DP_TP_CTL_LINK_TRAIN_IDLE;
intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), val);
- /*
- * Until TGL on PORT_A we can have only eDP in SST mode. There the only
- * reason we need to set idle transmission mode is to work around a HW
- * issue where we enable the pipe while not in idle link-training mode.
- * In this case there is requirement to wait for a minimum number of
- * idle patterns to be sent.
- */
- if (port == PORT_A && DISPLAY_VER(dev_priv) < 12)
- return;
-
if (intel_de_wait_for_set(dev_priv,
dp_tp_status_reg(encoder, crtc_state),
DP_TP_STATUS_IDLE_DONE, 1))
--
2.39.1
