On Thu, Aug 01, 2013 at 02:12:22PM -0700, Furquan Shaikh wrote:
> Enables getting correct mode clock when reading pipe config
>
> Signed-off-by: Furquan Shaikh <furquan@xxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 8 ++++++++
> drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
> 2 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 931b4bb..fa0af9b 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1269,6 +1269,7 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
> struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
> + int port = intel_ddi_get_encoder_port(encoder);
> u32 temp, flags = 0;
>
> temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
> @@ -1282,6 +1283,13 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
> flags |= DRM_MODE_FLAG_NVSYNC;
>
> pipe_config->adjusted_mode.flags |= flags;
> +
> + if (port == PORT_A) {
> + if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
> + pipe_config->port_clock = 162000;
> + else
> + pipe_config->port_clock = 270000;
> + }
I don't think this works correctly since for DP we have new clocks on
haswell, see intel_ddi_pll_mode_set. Also I think it'd be good to go right
ahead and implement clock readout support for all hsw clock sources, not
just DP.
-Daniel
> }
>
> static void intel_ddi_destroy(struct drm_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 3e66f05..681c99a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7176,6 +7176,8 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
> pipe_config->pixel_multiplier;
> }
>
> +#define div_ceil(A, B) ((A)/(B) + ((A)%(B) ? 1 : 0))
> +
> static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
> struct intel_crtc_config *pipe_config)
> {
> @@ -7218,7 +7220,11 @@ static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
> return;
>
> clock = ((u64)link_m * (u64)link_freq * (u64)repeat);
> - do_div(clock, link_n);
> + /* This is required because the value comes out to be in fraction
> + (eg. 70699.54). Need to round it up since values are compared in
> + drm_mode_equal
> + */
> + clock = div_ceil(clock, link_n);
>
> pipe_config->adjusted_mode.clock = clock;
> }
> @@ -9588,6 +9594,7 @@ static void intel_init_display(struct drm_device *dev)
>
> if (HAS_DDI(dev)) {
> dev_priv->display.get_pipe_config = haswell_get_pipe_config;
> + dev_priv->display.get_clock = ironlake_crtc_clock_get;
> dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
> dev_priv->display.crtc_enable = haswell_crtc_enable;
> dev_priv->display.crtc_disable = haswell_crtc_disable;
> --
> 1.8.3
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
