2013/8/1 <ville.syrjala@xxxxxxxxxxxxxxx>:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> All the ILK+ WM compute functions take the latency values in 0.1us
> units. Add a few comments to remind people about that.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
(but I would have written Latency instead of latency :P )
> ---
> drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++++---
> 1 file changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 5fe8c4e..51f445f 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2108,6 +2108,7 @@ static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
> return pixel_rate;
> }
>
> +/* latency must be in 0.1us units. */
> static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel,
> uint32_t latency)
> {
> @@ -2122,6 +2123,7 @@ static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel,
> return ret;
> }
>
> +/* latency must be in 0.1us units. */
> static uint32_t ilk_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
> uint32_t horiz_pixels, uint8_t bytes_per_pixel,
> uint32_t latency)
> @@ -2185,7 +2187,10 @@ enum hsw_data_buf_partitioning {
> HSW_DATA_BUF_PART_5_6,
> };
>
> -/* For both WM_PIPE and WM_LP. */
> +/*
> + * For both WM_PIPE and WM_LP.
> + * mem_value must be in 0.1us units.
> + */
> static uint32_t ilk_compute_pri_wm(struct hsw_pipe_wm_parameters *params,
> uint32_t mem_value,
> bool is_lp)
> @@ -2212,7 +2217,10 @@ static uint32_t ilk_compute_pri_wm(struct hsw_pipe_wm_parameters *params,
> return min(method1, method2);
> }
>
> -/* For both WM_PIPE and WM_LP. */
> +/*
> + * For both WM_PIPE and WM_LP.
> + * mem_value must be in 0.1us units.
> + */
> static uint32_t ilk_compute_spr_wm(struct hsw_pipe_wm_parameters *params,
> uint32_t mem_value)
> {
> @@ -2232,7 +2240,10 @@ static uint32_t ilk_compute_spr_wm(struct hsw_pipe_wm_parameters *params,
> return min(method1, method2);
> }
>
> -/* For both WM_PIPE and WM_LP. */
> +/*
> + * For both WM_PIPE and WM_LP.
> + * mem_value must be in 0.1us units.
> + */
> static uint32_t ilk_compute_cur_wm(struct hsw_pipe_wm_parameters *params,
> uint32_t mem_value)
> {
> --
> 1.8.1.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
