On Thu, Jul 25, 2013 at 12:21 PM, Jani Nikula
<jani.nikula@xxxxxxxxxxxxxxx> wrote:
> On Thu, 25 Jul 2013, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
>> On Thu, Jul 25, 2013 at 12:02 PM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
>>> On Thu, Jul 25, 2013 at 11:44 AM, Jani Nikula
>>> <jani.nikula@xxxxxxxxxxxxxxx> wrote:
>>>> On Thu, 25 Jul 2013, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
>>>>> On Thu, Jul 25, 2013 at 7:12 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> Changes since 20130724:
>>>>>>
>>>>>> Removed tree:
>>>>>> arm-dt (at maintainer's request)
>>>>>>
>>>>>> The wireless-next tree lost its build failure and gained a conflict
>>>>>> against Linus' tree.
>>>>>>
>>>>>> The tty tree lost its build failure.
>>>>>>
>>>>>> The staging tree gained a build failure for which I disabled a driver.
>>>>>>
>>>>>> ----------------------------------------------------------------------------
>>>>>>
>>>>>
>>>>> [ CCing drm and drm-intel folks ]
>>>>>
>>>>> With today's next-20130725 I see the following:
>>>>
>>>> Use of dev_priv->gt_lock in I915_WRITE through
>>>> intel_disable_gt_powersave before spin lock init, caused by
>>>>
>>>> commit 181d1b9e31c668259d3798c521672afb8edd355c
>>>> Author: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>>> Date: Sun Jul 21 13:16:24 2013 +0200
>>>>
>>>> drm/i915: fix up gt init sequence fallout
>>>>
>>>
>>> Ah, cool.
>>>
>>> I assumed/tested "drm/i915: fix the racy object accounting", but this
>>> does not fix it.
>>> Will try with yours.
>>>
>>
>> Sorry, Jani.
>>
>> next-20130725 ships the patch you pointed, too.
>
> Confused. I meant that the above mentioned commit "drm/i915: fix up gt
> init sequence fallout" causes the problem. The patch I included in my
> mail should fix it. Could you try that please?
>
[ Note2myself: Do not read half of the message... ]
The bad... Your patch needed some refresh against next-20130725 (guess
it's against drm-intel-nightly).
The good... YES, your patch fixes the issue for me!
The ugly... /me.
Feel free to add my:
Tested-by: Sedat Dilek <sedat.dilek@xxxxxxxxx>
Thanks for the quick fix!
- Sedat -
- Sedat -
> BR,
> Jani.
>
>
>
>>
>> - Sedat -
>>
>> [1] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/?id=next-20130725&qt=grep&q=drm%2Fi915%3A+fix+up+gt+init+sequence+fallout
>> [2] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=181d1b9e31c668259d3798c521672afb8edd355c
>>
>
> --
> Jani Nikula, Intel Open Source Technology Center
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc2-next20130725-4-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Thu Jul 25 12:31:29 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE [ 0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87552 r8192 d23040 u262144 [ 0.000000] pcpu-alloc: s87552 r8192 d23040 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938460K/4086000K available (7119K kernel code, 1044K rwdata, 3132K rodata, 1332K init, 1984K bss, 147540K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.329 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.65 BogoMIPS (lpj=6385316) [ 0.000081] pid_max: default: 32768 minimum: 301 [ 0.000247] Security Framework initialized [ 0.000305] AppArmor: AppArmor initialized [ 0.000342] Yama: becoming mindful. [ 0.000750] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001859] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002362] Mount-cache hash table entries: 256 [ 0.002935] Initializing cgroup subsys memory [ 0.003037] Initializing cgroup subsys devices [ 0.003075] Initializing cgroup subsys freezer [ 0.003114] Initializing cgroup subsys blkio [ 0.003151] Initializing cgroup subsys perf_event [ 0.003191] Initializing cgroup subsys hugetlb [ 0.003280] Disabled fast string operations [ 0.003317] CPU: Physical Processor ID: 0 [ 0.003354] CPU: Processor Core ID: 0 [ 0.003393] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003393] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003460] mce: CPU supports 7 MCE banks [ 0.003511] CPU0: Thermal monitoring enabled (TM1) [ 0.003557] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003557] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003557] tlb_flushall_shift: 5 [ 0.003730] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000) [ 0.004817] ACPI: Core revision 20130626 [ 0.015678] ACPI: All ACPI Tables successfully acquired [ 0.029612] ftrace: allocating 27065 entries in 106 pages [ 0.044962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084661] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085275] TSC deadline timer enabled [ 0.085287] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085436] ... version: 3 [ 0.085472] ... bit width: 48 [ 0.085508] ... generic registers: 4 [ 0.085545] ... value mask: 0000ffffffffffff [ 0.085583] ... max period: 0000ffffffffffff [ 0.085621] ... fixed-purpose events: 3 [ 0.085657] ... event mask: 000000070000000f [ 0.098786] Disabled fast string operations [ 0.101971] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113649] Disabled fast string operations [ 0.127360] Disabled fast string operations [ 0.087713] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129493] Brought up 4 CPUs [ 0.129598] smpboot: Total of 4 processors activated (12770.63 BogoMIPS) [ 0.133689] devtmpfs: initialized [ 0.135740] EVM: security.selinux [ 0.135776] EVM: security.SMACK64 [ 0.135810] EVM: security.capability [ 0.135933] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.137498] regulator-dummy: no parameters [ 0.137688] NET: Registered protocol family 16 [ 0.138029] cpuidle: using governor ladder [ 0.138065] cpuidle: using governor menu [ 0.138141] ACPI: bus type PCI registered [ 0.138290] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138349] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.145118] PCI: Using configuration type 1 for base access [ 0.148522] bio: create slab <bio-0> at 0 [ 0.148982] ACPI: Added _OSI(Module Device) [ 0.149020] ACPI: Added _OSI(Processor Device) [ 0.149057] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149095] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150956] ACPI: EC: Look up EC in DSDT [ 0.177335] ACPI: Executed 1 blocks of module-level executable AML code [ 0.183377] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.195072] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.195677] ACPI: Dynamic OEM Table Load: [ 0.195747] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.205774] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.206458] ACPI: Dynamic OEM Table Load: [ 0.206528] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.217684] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218256] ACPI: Dynamic OEM Table Load: [ 0.218324] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.231760] ACPI: Interpreter enabled [ 0.231811] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130626/hwxface-571) [ 0.231920] ACPI: (supports S0 S1 S3 S4 S5) [ 0.231957] ACPI: Using IOAPIC for interrupt routing [ 0.232050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.232337] ACPI: No dock devices found. [ 0.256006] ACPI: Power Resource [FN00] (off) [ 0.256232] ACPI: Power Resource [FN01] (off) [ 0.256449] ACPI: Power Resource [FN02] (off) [ 0.256667] ACPI: Power Resource [FN03] (off) [ 0.256889] ACPI: Power Resource [FN04] (off) [ 0.258082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.258460] \_SB_.PCI0:_OSC invalid UUID [ 0.258462] _OSC request data:1 8 0 [ 0.259429] PCI host bridge to bus 0000:00 [ 0.259468] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.259509] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.259549] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.259590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.259632] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.259673] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.259730] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.259883] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.259897] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.259904] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.259910] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.260092] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.260119] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.260205] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260360] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260383] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.260484] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260590] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260610] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.260689] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260734] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260840] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.260931] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.260980] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.261088] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.261177] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261238] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261346] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261435] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261568] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261592] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.261693] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261798] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.261994] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.262016] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.262026] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.262036] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.262046] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.262056] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.262066] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.262118] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262234] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262254] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.262277] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262650] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.262847] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.263584] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.263755] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.269641] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269684] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.269863] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.269933] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.270056] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.270132] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.270469] pci 0000:02:00.0: supports D1 D2 [ 0.270471] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270599] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.277561] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.277624] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.277634] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.277761] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.277800] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.277997] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.285533] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.285609] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.285792] \_SB_.PCI0:_OSC invalid UUID [ 0.285794] _OSC request data:1 1f 0 [ 0.285799] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.285855] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.286833] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.287182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.287575] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.287921] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.288267] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.288640] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.289032] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.289379] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.290271] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.290348] ACPI: \_SB_.PCI0: notify handler is installed [ 0.290410] Found 1 acpi root devices [ 0.290480] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.290835] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290893] vgaarb: loaded [ 0.290927] vgaarb: bridge control possible 0000:00:02.0 [ 0.291644] SCSI subsystem initialized [ 0.291681] ACPI: bus type ATA registered [ 0.291814] libata version 3.00 loaded. [ 0.291877] ACPI: bus type USB registered [ 0.291957] usbcore: registered new interface driver usbfs [ 0.292020] usbcore: registered new interface driver hub [ 0.292115] usbcore: registered new device driver usb [ 0.292505] PCI: Using ACPI for IRQ routing [ 0.294218] PCI: pci_cache_line_size set to 64 bytes [ 0.294329] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.294332] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.294334] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.294336] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.294579] NetLabel: Initializing [ 0.294615] NetLabel: domain hash size = 128 [ 0.294651] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.294735] NetLabel: unlabeled traffic allowed by default [ 0.294863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.295053] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.298119] Switched to clocksource hpet [ 0.315924] AppArmor: AppArmor Filesystem Enabled [ 0.316013] pnp: PnP ACPI init [ 0.316063] ACPI: bus type PNP registered [ 0.316500] pnp 00:00: [dma 4] [ 0.316544] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.316591] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.316759] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.316817] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.316896] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.316939] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.316979] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.317020] system 00:04: [io 0xffff] has been reserved [ 0.317060] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.317101] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.317142] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.317182] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.317222] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.317263] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.317305] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317356] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.317447] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.317489] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.317548] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.317632] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.317943] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.317986] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.318028] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.318070] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.318122] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.318164] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.318206] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.318248] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.318291] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.318333] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.318376] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.319066] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.319105] pnp: PnP ACPI: found 11 devices [ 0.319143] ACPI: bus type PNP unregistered [ 0.327255] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.327300] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.327351] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.327392] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.327438] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.327500] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.327542] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.328011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.328013] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.328015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.328017] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.328019] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.328021] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.328023] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.328026] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.328028] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.328164] NET: Registered protocol family 2 [ 0.328574] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.328811] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.329138] TCP: Hash tables configured (established 32768 bind 32768) [ 0.329437] TCP: reno registered [ 0.329490] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.329594] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.329891] NET: Registered protocol family 1 [ 0.329947] pci 0000:00:02.0: Boot video device [ 0.330733] PCI: CLS 64 bytes, default 64 [ 0.330943] Trying to unpack rootfs image as initramfs... [ 0.407502] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000) [ 0.407562] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.407604] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.408037] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.408085] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.408135] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.408187] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.408313] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.408371] Scanning for low memory corruption every 60 seconds [ 0.409010] Initialise module verification [ 0.409110] audit: initializing netlink socket (disabled) [ 0.409170] type=2000 audit(1374755666.396:1): initialized [ 0.439388] bounce pool size: 64 pages [ 0.439949] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.440670] VFS: Disk quotas dquot_6.5.2 [ 0.440750] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.441618] fuse init (API version 7.22) [ 0.441764] msgmni has been set to 7698 [ 0.442483] Key type asymmetric registered [ 0.442521] Asymmetric key parser 'x509' registered [ 0.442608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.442717] io scheduler noop registered [ 0.442755] io scheduler deadline registered (default) [ 0.442829] io scheduler cfq registered [ 0.443242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.443322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.443509] intel_idle: MWAIT substates: 0x21120 [ 0.443511] intel_idle: v0.4 model 0x2A [ 0.443512] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.444313] ACPI: AC Adapter [ADP1] (on-line) [ 0.444685] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.444802] ACPI: Lid Switch [LID0] [ 0.444901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.444961] ACPI: Power Button [PWRB] [ 0.445057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.445113] ACPI: Power Button [PWRF] [ 0.445241] ACPI: Fan [FAN0] (off) [ 0.445329] ACPI: Fan [FAN1] (off) [ 0.445415] ACPI: Fan [FAN2] (off) [ 0.445501] ACPI: Fan [FAN3] (off) [ 0.445586] ACPI: Fan [FAN4] (off) [ 0.445706] ACPI: Requesting acpi_cpufreq [ 0.449118] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.449159] ACPI: Thermal Zone [TZ00] (74 C) [ 0.449564] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.449603] ACPI: Thermal Zone [TZ01] (30 C) [ 0.449688] GHES: HEST is not enabled! [ 0.449959] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.456519] ACPI: Battery Slot [BAT1] (battery present) [ 0.456536] Linux agpgart interface v0.103 [ 0.459387] brd: module loaded [ 0.460818] loop: module loaded [ 0.461084] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.461133] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.465186] ahci 0000:00:1f.2: version 3.0 [ 0.465401] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.465624] ahci: SSS flag set, parallel bus scan disabled [ 0.478148] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.478219] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.478279] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.503040] scsi0 : ahci [ 0.503374] scsi1 : ahci [ 0.503631] scsi2 : ahci [ 0.503883] scsi3 : ahci [ 0.504144] scsi4 : ahci [ 0.504400] scsi5 : ahci [ 0.504528] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.504582] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.504634] ata3: DUMMY [ 0.504667] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.504719] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.504771] ata6: DUMMY [ 0.505687] libphy: Fixed MDIO Bus: probed [ 0.506016] tun: Universal TUN/TAP device driver, 1.6 [ 0.506054] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.506199] PPP generic driver version 2.4.2 [ 0.506360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.506401] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.506409] ehci-pci: EHCI PCI platform driver [ 0.506653] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.506663] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.506708] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.506781] ehci-pci 0000:00:1a.0: debug port 2 [ 0.506821] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.506825] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.506863] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.510757] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.510759] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.510806] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.510848] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.522074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.522217] usb usb1: default language 0x0409 [ 0.522239] usb usb1: udev 1, busnum 1, minor = 0 [ 0.522241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.522289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522342] usb usb1: Product: EHCI Host Controller [ 0.522380] usb usb1: Manufacturer: Linux 3.11.0-rc2-next20130725-4-iniza-small ehci_hcd [ 0.522435] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.522642] usb usb1: usb_probe_device [ 0.522645] usb usb1: configuration #1 chosen from 1 choice [ 0.522656] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.522688] hub 1-0:1.0: usb_probe_interface [ 0.522689] hub 1-0:1.0: usb_probe_interface - got id [ 0.522692] hub 1-0:1.0: USB hub found [ 0.522734] hub 1-0:1.0: 2 ports detected [ 0.522770] hub 1-0:1.0: standalone hub [ 0.522771] hub 1-0:1.0: no power switching (usb 1.0) [ 0.522773] hub 1-0:1.0: individual port over-current protection [ 0.522775] hub 1-0:1.0: power on to power good time: 20ms [ 0.522780] hub 1-0:1.0: local power source is good [ 0.522836] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.523127] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.523133] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.523178] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.523252] ehci-pci 0000:00:1d.0: debug port 2 [ 0.523292] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.523296] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.523338] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.527225] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.527226] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.527271] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.527311] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.538065] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.538215] usb usb2: default language 0x0409 [ 0.538237] usb usb2: udev 1, busnum 2, minor = 128 [ 0.538239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.538279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.538332] usb usb2: Product: EHCI Host Controller [ 0.538378] usb usb2: Manufacturer: Linux 3.11.0-rc2-next20130725-4-iniza-small ehci_hcd [ 0.538433] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.538634] usb usb2: usb_probe_device [ 0.538637] usb usb2: configuration #1 chosen from 1 choice [ 0.538650] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.538681] hub 2-0:1.0: usb_probe_interface [ 0.538683] hub 2-0:1.0: usb_probe_interface - got id [ 0.538686] hub 2-0:1.0: USB hub found [ 0.538727] hub 2-0:1.0: 2 ports detected [ 0.538763] hub 2-0:1.0: standalone hub [ 0.538765] hub 2-0:1.0: no power switching (usb 1.0) [ 0.538766] hub 2-0:1.0: individual port over-current protection [ 0.538768] hub 2-0:1.0: power on to power good time: 20ms [ 0.538774] hub 2-0:1.0: local power source is good [ 0.538827] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.538911] ehci-platform: EHCI generic platform driver [ 0.538971] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.539010] ohci_hcd: block sizes: ed 80 td 96 [ 0.539017] ohci-pci: OHCI PCI platform driver [ 0.539073] ohci-platform: OHCI generic platform driver [ 0.539124] uhci_hcd: USB Universal Host Controller Interface driver [ 0.539418] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.539463] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.549225] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.549258] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.549265] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.549274] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.549280] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.549286] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.549537] usb usb3: default language 0x0409 [ 0.549547] usb usb3: udev 1, busnum 3, minor = 256 [ 0.549549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.549590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549642] usb usb3: Product: xHCI Host Controller [ 0.549679] usb usb3: Manufacturer: Linux 3.11.0-rc2-next20130725-4-iniza-small xhci_hcd [ 0.549733] usb usb3: SerialNumber: 0000:03:00.0 [ 0.549875] usb usb3: usb_probe_device [ 0.549877] usb usb3: configuration #1 chosen from 1 choice [ 0.549882] xHCI xhci_add_endpoint called for root hub [ 0.549883] xHCI xhci_check_bandwidth called for root hub [ 0.549889] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.549916] hub 3-0:1.0: usb_probe_interface [ 0.549917] hub 3-0:1.0: usb_probe_interface - got id [ 0.549919] hub 3-0:1.0: USB hub found [ 0.549982] hub 3-0:1.0: 2 ports detected [ 0.550017] hub 3-0:1.0: standalone hub [ 0.550019] hub 3-0:1.0: no power switching (usb 1.0) [ 0.550020] hub 3-0:1.0: individual port over-current protection [ 0.550021] hub 3-0:1.0: Single TT [ 0.550023] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.550024] hub 3-0:1.0: power on to power good time: 20ms [ 0.550029] hub 3-0:1.0: local power source is good [ 0.550063] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.550125] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.550165] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.550223] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.550256] usb usb4: skipped 1 descriptor after endpoint [ 0.550261] usb usb4: default language 0x0409 [ 0.550271] usb usb4: udev 1, busnum 4, minor = 384 [ 0.550273] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.550312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.550365] usb usb4: Product: xHCI Host Controller [ 0.550402] usb usb4: Manufacturer: Linux 3.11.0-rc2-next20130725-4-iniza-small xhci_hcd [ 0.550455] usb usb4: SerialNumber: 0000:03:00.0 [ 0.550595] usb usb4: usb_probe_device [ 0.550597] usb usb4: configuration #1 chosen from 1 choice [ 0.550601] xHCI xhci_add_endpoint called for root hub [ 0.550602] xHCI xhci_check_bandwidth called for root hub [ 0.550608] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.550635] hub 4-0:1.0: usb_probe_interface [ 0.550636] hub 4-0:1.0: usb_probe_interface - got id [ 0.550638] hub 4-0:1.0: USB hub found [ 0.550683] hub 4-0:1.0: 2 ports detected [ 0.550718] hub 4-0:1.0: standalone hub [ 0.550719] hub 4-0:1.0: no power switching (usb 1.0) [ 0.550721] hub 4-0:1.0: individual port over-current protection [ 0.550722] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.550724] hub 4-0:1.0: power on to power good time: 20ms [ 0.550729] hub 4-0:1.0: local power source is good [ 0.550761] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.562186] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.568671] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.568714] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.568996] mousedev: PS/2 mouse device common for all mice [ 0.569518] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.569589] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.569754] device-mapper: uevent: version 1.0.3 [ 0.569949] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 0.570018] Intel P-state driver initializing. [ 0.570083] Intel pstate controlling: cpu 0 [ 0.570163] Intel pstate controlling: cpu 1 [ 0.570233] Intel pstate controlling: cpu 2 [ 0.570297] Intel pstate controlling: cpu 3 [ 0.570411] ledtrig-cpu: registered to indicate activity on CPUs [ 0.570940] ashmem: initialized [ 0.571193] TCP: cubic registered [ 0.571371] NET: Registered protocol family 10 [ 0.571867] NET: Registered protocol family 17 [ 0.571921] Key type dns_resolver registered [ 0.572417] PM: Hibernation image not present or could not be loaded. [ 0.572423] Loading module verification certificates [ 0.573536] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0e153d92a388190b21415d66d299c061f02bde6c' [ 0.573622] registered taskstats version 1 [ 0.576703] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.577706] Key type trusted registered [ 0.583780] Key type encrypted registered [ 0.591400] rtc_cmos 00:05: setting system clock to 2013-07-25 12:34:26 UTC (1374755666) [ 0.591927] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.591973] EDD information not available. [ 0.622039] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.622062] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.638014] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.638041] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.650065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.650091] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.650109] hub 3-0:1.0: hub_suspend [ 0.650119] usb usb3: bus auto-suspend, wakeup 1 [ 0.650169] hub 4-0:1.0: hub_suspend [ 0.650174] usb usb4: bus auto-suspend, wakeup 1 [ 0.658922] usb usb4: usb wakeup-resume [ 0.658935] usb usb4: usb auto-resume [ 0.669990] hub 4-0:1.0: hub_resume [ 0.670023] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.721984] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.722014] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.778191] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.778204] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.821883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.823145] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.823220] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.824657] ata1.00: configured for UDMA/133 [ 0.825179] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.825855] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.825891] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.826035] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.826539] sd 0:0:0:0: [sda] Write Protect is off [ 0.826610] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.826835] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.833811] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.844841] sda: sda1 sda2 sda3 [ 0.846161] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.890110] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.890124] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.966538] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.966548] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.966620] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.967025] usb 1-1: usb_probe_device [ 0.967034] usb 1-1: configuration #1 chosen from 1 choice [ 0.967299] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.967383] hub 1-1:1.0: usb_probe_interface [ 0.967388] hub 1-1:1.0: usb_probe_interface - got id [ 0.967395] hub 1-1:1.0: USB hub found [ 0.967647] hub 1-1:1.0: 6 ports detected [ 0.968256] hub 1-1:1.0: standalone hub [ 0.968260] hub 1-1:1.0: individual port power switching [ 0.968264] hub 1-1:1.0: individual port over-current protection [ 0.968267] hub 1-1:1.0: Single TT [ 0.968270] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.968274] hub 1-1:1.0: power on to power good time: 100ms [ 0.968582] hub 1-1:1.0: local power source is good [ 0.968994] hub 1-1:1.0: enabling power on all ports [ 0.970189] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.970207] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.026015] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.026029] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.070199] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.070698] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.081710] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.137936] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.137952] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.145660] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.146326] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.146404] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.147157] ata2.00: configured for UDMA/133 [ 1.147675] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.148293] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.148410] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.148606] sd 1:0:0:0: [sdb] Write Protect is off [ 1.148675] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.148776] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.150041] sdb: sdb1 sdb2 [ 1.151220] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.169637] usb 1-1: link qh256-0001/ffff8801186798c0 start 1 [1/0 us] [ 1.214359] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.214369] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.214441] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.214847] usb 2-1: usb_probe_device [ 1.214856] usb 2-1: configuration #1 chosen from 1 choice [ 1.215118] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.215204] hub 2-1:1.0: usb_probe_interface [ 1.215209] hub 2-1:1.0: usb_probe_interface - got id [ 1.215216] hub 2-1:1.0: USB hub found [ 1.215471] hub 2-1:1.0: 6 ports detected [ 1.215537] hub 2-1:1.0: standalone hub [ 1.215541] hub 2-1:1.0: individual port power switching [ 1.215544] hub 2-1:1.0: individual port over-current protection [ 1.215547] hub 2-1:1.0: Single TT [ 1.215551] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.215555] hub 2-1:1.0: power on to power good time: 100ms [ 1.215844] hub 2-1:1.0: local power source is good [ 1.216355] hub 2-1:1.0: enabling power on all ports [ 1.217568] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.217588] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.314548] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.333072] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.346091] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.346530] usb 4-1: skipped 1 descriptor after endpoint [ 1.346537] usb 4-1: skipped 1 descriptor after endpoint [ 1.346682] usb 4-1: default language 0x0409 [ 1.347097] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.347105] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.347178] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.347247] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.347311] usb 4-1: Manufacturer: MEDION [ 1.347374] usb 4-1: SerialNumber: 3180000000000000092C [ 1.347782] usb 4-1: usb_probe_device [ 1.347792] usb 4-1: configuration #1 chosen from 1 choice [ 1.348988] usb 4-1: Successful Endpoint Configure command [ 1.349091] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.349334] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.349505] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.405463] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.413479] usb 2-1: link qh256-0001/ffff8801187045c0 start 1 [1/0 us] [ 1.421714] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.465410] ata4: SATA link down (SStatus 0 SControl 300) [ 1.516949] usb 1-1.2: skipped 1 descriptor after interface [ 1.517720] usb 1-1.2: default language 0x0409 [ 1.520318] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.520329] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.520405] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.520494] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.520559] usb 1-1.2: Manufacturer: Logitech [ 1.520992] usb 1-1.2: usb_probe_device [ 1.521002] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.521613] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.522007] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.593595] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.785196] ata5: SATA link down (SStatus 0 SControl 300) [ 1.787730] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000) [ 1.787814] Write protecting the kernel read-only data: 12288k [ 1.793242] Freeing unused kernel memory: 1060K (ffff8800016f7000 - ffff880001800000) [ 1.797966] Freeing unused kernel memory: 964K (ffff880001b0f000 - ffff880001c00000) [ 1.835001] usb 1-1.4: skipped 1 descriptor after configuration [ 1.835008] usb 1-1.4: skipped 5 descriptors after interface [ 1.835012] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.835015] usb 1-1.4: skipped 23 descriptors after interface [ 1.836425] udevd[122]: starting version 175 [ 1.837076] usb 1-1.4: default language 0x0409 [ 1.849073] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.849082] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.849149] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.849211] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.849260] usb 1-1.4: Manufacturer: 123 [ 1.849501] usb 1-1.4: usb_probe_device [ 1.849504] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.849689] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.985100] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.985187] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.985566] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.985943] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.986004] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.991628] usb-storage 4-1:1.0: usb_probe_interface [ 1.991640] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.991646] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.992238] scsi6 : usb-storage 4-1:1.0 [ 1.996204] usbcore: registered new interface driver usb-storage [ 2.021698] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.023056] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.023184] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.039605] hidraw: raw HID events driver (C) Jiri Kosina [ 2.042538] usbhid 1-1.2:1.0: usb_probe_interface [ 2.042543] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.045558] usbcore: registered new interface driver usbhid [ 2.045603] usbhid: USB HID core driver [ 2.058316] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.058707] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.093042] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.193899] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.193909] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.193980] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.194379] usb 2-1.5: usb_probe_device [ 2.194388] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.194962] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.195253] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.195654] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.195821] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.405042] Switched to clocksource tsc [ 2.918649] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.992674] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.993318] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.993633] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.994164] sd 6:0:0:0: [sdc] Write Protect is off [ 2.994217] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.994678] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.997475] sdc: sdc1 sdc2 sdc3 [ 2.999807] sd 6:0:0:0: [sdc] Attached SCSI disk [ 14.950730] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 14.977069] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 15.007344] udevd[623]: starting version 175 [ 15.265177] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130626/utaddress-251) [ 15.265187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.265192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.265195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.265197] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.265200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.265201] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130626/utaddress-251) [ 15.265204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.265206] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 15.346093] lp: driver loaded but no devices found [ 15.642301] wmi: Mapper loaded [ 15.718119] cfg80211: Calling CRDA to update world regulatory domain [ 15.718413] samsung_laptop: detected SABI interface: SwSmi@ [ 15.718417] samsung_laptop: Backlight controlled by ACPI video driver [ 15.727916] type=1400 audit(1374748481.643:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=728 comm="apparmor_parser" [ 15.728769] type=1400 audit(1374748481.643:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=728 comm="apparmor_parser" [ 15.729313] type=1400 audit(1374748481.643:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=728 comm="apparmor_parser" [ 15.737280] cfg80211: World regulatory domain updated: [ 15.737285] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.737288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.737291] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.737293] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.737295] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.737298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.826483] Linux video capture interface: v2.00 [ 15.828552] Bluetooth: Core ver 2.16 [ 15.828624] NET: Registered protocol family 31 [ 15.828627] Bluetooth: HCI device and connection manager initialized [ 15.828638] Bluetooth: HCI socket layer initialized [ 15.828649] Bluetooth: L2CAP socket layer initialized [ 15.828674] Bluetooth: SCO socket layer initialized [ 15.912979] init: failsafe main process (962) killed by TERM signal [ 15.990242] btusb 2-1.5:1.0: usb_probe_interface [ 15.990250] btusb 2-1.5:1.0: usb_probe_interface - got id [ 15.991586] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 15.991591] Copyright(c) 2003-2013 Intel Corporation [ 15.991687] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 15.992189] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 15.995342] [drm] Initialized drm 1.1.0 20060810 [ 15.996219] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 15.997451] usbcore: registered new interface driver btusb [ 15.999512] usb 2-1.5: link qh1-0e01/ffff8800bb8ad340 start 0 [1/2 us] [ 16.043608] ppdev: user-space parallel port driver [ 16.053834] type=1400 audit(1374748481.967:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1110 comm="apparmor_parser" [ 16.054638] type=1400 audit(1374748481.967:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1110 comm="apparmor_parser" [ 16.055162] type=1400 audit(1374748481.971:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1110 comm="apparmor_parser" [ 16.186757] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.186762] Bluetooth: BNEP filters: protocol multicast [ 16.186775] Bluetooth: BNEP socket layer initialized [ 16.217185] Bluetooth: RFCOMM TTY layer initialized [ 16.217204] Bluetooth: RFCOMM socket layer initialized [ 16.217206] Bluetooth: RFCOMM ver 1.11 [ 16.764465] type=1400 audit(1374748482.679:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1109 comm="apparmor_parser" [ 16.764501] type=1400 audit(1374748482.679:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1114 comm="apparmor_parser" [ 16.765217] type=1400 audit(1374748482.679:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1109 comm="apparmor_parser" [ 16.766142] type=1400 audit(1374748482.679:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1114 comm="apparmor_parser" [ 16.875025] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 16.890149] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 16.964803] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 17.164199] uvcvideo 1-1.4:1.0: usb_probe_interface [ 17.164212] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 17.164294] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 17.184016] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 17.184430] usbcore: registered new interface driver uvcvideo [ 17.184437] USB Video Class driver (1.1.1) [ 17.188073] usb 1-1.4: link qh16-0001/ffff8801182d89c0 start 2 [1/0 us] [ 17.188153] usb 1-1.4: unlink qh16-0001/ffff8801182d89c0 start 2 [1/0 us] [ 17.302193] [drm] Memory usable by graphics device = 2048M [ 17.302205] i915 0000:00:02.0: setting latency timer to 64 [ 17.334223] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 17.334246] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.334247] [drm] Driver supports precise vblank timestamp query. [ 17.334404] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.345244] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 17.345248] [drm] This can cause pipe underruns and display issues. [ 17.345250] [drm] Please upgrade your BIOS to fix this. [ 17.356032] fbcon: inteldrmfb (fb0) is primary device [ 17.500530] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 17.500533] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 17.500535] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 17.500537] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled [ 17.500540] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 17.500593] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.535867] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 17.551110] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.557991] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.831075] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 17.837697] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 17.915591] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.360257] Console: switching to colour frame buffer device 170x48 [ 18.362895] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.362898] i915 0000:00:02.0: registered panic notifier [ 18.380545] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.382154] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 18.384158] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.385634] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 18.424500] init: alsa-restore main process (1210) terminated with status 19 [ 18.432389] usb 1-1.2: link qh8-0e01/ffff880118007540 start 3 [1/2 us] [ 18.446041] usb 1-1.2: unlink qh8-0e01/ffff880118007540 start 3 [1/2 us] [ 18.460985] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 18.462316] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 18.463010] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.813405] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 19.719187] ehci-pci 0000:00:1a.0: reused qh ffff880118007540 schedule [ 19.719195] usb 1-1.2: link qh8-0e01/ffff880118007540 start 3 [1/2 us] [ 19.800692] usb 1-1.4: usb auto-suspend, wakeup 0 [ 24.104457] wlan0: authenticate with 00:04:0e:e4:00:3d [ 24.109605] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 24.111434] wlan0: authenticated [ 24.111636] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 24.111642] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 24.113308] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 24.117153] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 24.125857] wlan0: associated [ 24.125984] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.282315] usb usb3: usb auto-resume [ 27.282336] hub 3-0:1.0: hub_resume [ 27.282368] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.282399] hub 3-0:1.0: hub_suspend [ 27.282407] usb usb3: bus auto-suspend, wakeup 1 [ 27.282437] usb usb3: usb auto-resume [ 27.291149] hub 3-0:1.0: hub_resume [ 27.291227] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.291249] hub 3-0:1.0: hub_suspend [ 27.291257] usb usb3: bus auto-suspend, wakeup 1 [ 27.291800] usb 1-1.4: usb auto-resume [ 27.339090] usb 1-1.4: finish resume [ 27.445163] usb usb3: usb auto-resume [ 27.445184] hub 3-0:1.0: hub_resume [ 27.445212] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.445237] hub 3-0:1.0: hub_suspend [ 27.445243] usb usb3: bus auto-suspend, wakeup 1 [ 27.445270] usb usb3: usb auto-resume [ 27.454934] hub 3-0:1.0: hub_resume [ 27.454978] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.455019] hub 3-0:1.0: hub_suspend [ 27.455023] usb usb3: bus auto-suspend, wakeup 1 [ 27.475165] usb usb3: usb auto-resume [ 27.475186] hub 3-0:1.0: hub_resume [ 27.475212] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.475236] hub 3-0:1.0: hub_suspend [ 27.475243] usb usb3: bus auto-suspend, wakeup 1 [ 27.475268] usb usb3: usb auto-resume [ 27.487082] hub 3-0:1.0: hub_resume [ 27.487150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.487179] hub 3-0:1.0: hub_suspend [ 27.487187] usb usb3: bus auto-suspend, wakeup 1 [ 27.521690] usb usb3: usb auto-resume [ 27.521716] hub 3-0:1.0: hub_resume [ 27.521786] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.521808] hub 3-0:1.0: hub_suspend [ 27.521816] usb usb3: bus auto-suspend, wakeup 1 [ 27.522096] usb usb3: usb auto-resume [ 27.531002] hub 3-0:1.0: hub_resume [ 27.531080] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.531102] hub 3-0:1.0: hub_suspend [ 27.531111] usb usb3: bus auto-suspend, wakeup 1 [ 27.690371] usb usb3: usb auto-resume [ 27.690393] hub 3-0:1.0: hub_resume [ 27.690422] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.690443] hub 3-0:1.0: hub_suspend [ 27.690452] usb usb3: bus auto-suspend, wakeup 1 [ 27.690476] usb usb3: usb auto-resume [ 27.698791] hub 3-0:1.0: hub_resume [ 27.698845] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.698868] hub 3-0:1.0: hub_suspend [ 27.698875] usb usb3: bus auto-suspend, wakeup 1 [ 27.705953] usb usb3: usb auto-resume [ 27.714782] hub 3-0:1.0: hub_resume [ 27.714814] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.714854] hub 3-0:1.0: hub_suspend [ 27.714861] usb usb3: bus auto-suspend, wakeup 1 [ 27.714925] usb usb3: usb auto-resume [ 27.726761] hub 3-0:1.0: hub_resume [ 27.726790] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.726800] hub 3-0:1.0: hub_suspend [ 27.726808] usb usb3: bus auto-suspend, wakeup 1 [ 27.728704] usb usb3: usb auto-resume [ 27.738733] hub 3-0:1.0: hub_resume [ 27.738763] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.738801] hub 3-0:1.0: hub_suspend [ 27.738807] usb usb3: bus auto-suspend, wakeup 1 [ 27.738866] usb usb3: usb auto-resume [ 27.750729] hub 3-0:1.0: hub_resume [ 27.750759] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.750781] hub 3-0:1.0: hub_suspend [ 27.750787] usb usb3: bus auto-suspend, wakeup 1 [ 27.897111] usb usb3: usb auto-resume [ 27.897135] hub 3-0:1.0: hub_resume [ 27.897173] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.897195] hub 3-0:1.0: hub_suspend [ 27.897213] usb usb3: bus auto-suspend, wakeup 1 [ 27.897240] usb usb3: usb auto-resume [ 27.906747] hub 3-0:1.0: hub_resume [ 27.906785] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.906804] hub 3-0:1.0: hub_suspend [ 27.906811] usb usb3: bus auto-suspend, wakeup 1 [ 27.914813] usb usb3: usb auto-resume [ 27.926612] hub 3-0:1.0: hub_resume [ 27.926644] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.926668] hub 3-0:1.0: hub_suspend [ 27.926674] usb usb3: bus auto-suspend, wakeup 1 [ 27.926741] usb usb3: usb auto-resume [ 27.938631] hub 3-0:1.0: hub_resume [ 27.938888] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 27.938908] hub 3-0:1.0: hub_suspend [ 27.938918] usb usb3: bus auto-suspend, wakeup 1 [ 28.256709] usb usb3: usb auto-resume [ 28.256734] hub 3-0:1.0: hub_resume [ 28.256764] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.256788] hub 3-0:1.0: hub_suspend [ 28.256797] usb usb3: bus auto-suspend, wakeup 1 [ 28.256874] usb usb3: usb auto-resume [ 28.266416] hub 3-0:1.0: hub_resume [ 28.266455] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.266471] hub 3-0:1.0: hub_suspend [ 28.266477] usb usb3: bus auto-suspend, wakeup 1 [ 28.481807] usb usb3: usb auto-resume [ 28.481831] hub 3-0:1.0: hub_resume [ 28.482382] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.482453] hub 3-0:1.0: hub_suspend [ 28.482462] usb usb3: bus auto-suspend, wakeup 1 [ 29.555781] usb usb3: usb auto-resume [ 29.555807] hub 3-0:1.0: hub_resume [ 29.555860] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.555895] hub 3-0:1.0: hub_suspend [ 29.555904] usb usb3: bus auto-suspend, wakeup 1 [ 29.555931] usb usb3: usb auto-resume [ 29.565459] hub 3-0:1.0: hub_resume [ 29.565525] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.565546] hub 3-0:1.0: hub_suspend [ 29.565554] usb usb3: bus auto-suspend, wakeup 1 [ 29.634576] usb usb3: usb auto-resume [ 29.634600] hub 3-0:1.0: hub_resume [ 29.635392] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.635412] hub 3-0:1.0: hub_suspend [ 29.635420] usb usb3: bus auto-suspend, wakeup 1 [ 29.648049] usb usb3: usb auto-resume [ 29.648071] hub 3-0:1.0: hub_resume [ 29.648097] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.648114] hub 3-0:1.0: hub_suspend [ 29.648122] usb usb3: bus auto-suspend, wakeup 1 [ 29.648147] usb usb3: usb auto-resume [ 29.657370] hub 3-0:1.0: hub_resume [ 29.657406] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.657426] hub 3-0:1.0: hub_suspend [ 29.657434] usb usb3: bus auto-suspend, wakeup 1 [ 29.746380] usb usb3: usb auto-resume [ 29.746402] hub 3-0:1.0: hub_resume [ 29.746457] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.746493] hub 3-0:1.0: hub_suspend [ 29.746498] usb usb3: bus auto-suspend, wakeup 1 [ 29.747341] usb usb3: usb auto-resume [ 29.757308] hub 3-0:1.0: hub_resume [ 29.757348] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.757388] hub 3-0:1.0: hub_suspend [ 29.757396] usb usb3: bus auto-suspend, wakeup 1 [ 29.757468] usb usb3: usb auto-resume [ 29.769302] hub 3-0:1.0: hub_resume [ 29.769342] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.769360] hub 3-0:1.0: hub_suspend [ 29.769368] usb usb3: bus auto-suspend, wakeup 1 [ 29.771494] usb usb3: usb auto-resume [ 29.781301] hub 3-0:1.0: hub_resume [ 29.781334] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.781377] hub 3-0:1.0: hub_suspend [ 29.781384] usb usb3: bus auto-suspend, wakeup 1 [ 29.781443] usb usb3: usb auto-resume [ 29.793281] hub 3-0:1.0: hub_resume [ 29.793311] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.793327] hub 3-0:1.0: hub_suspend [ 29.793334] usb usb3: bus auto-suspend, wakeup 1 [ 29.795419] usb usb3: usb auto-resume [ 29.805325] hub 3-0:1.0: hub_resume [ 29.805381] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.805397] hub 3-0:1.0: hub_suspend [ 29.805403] usb usb3: bus auto-suspend, wakeup 1 [ 29.805430] usb usb3: usb auto-resume [ 29.817364] hub 3-0:1.0: hub_resume [ 29.817413] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.817459] hub 3-0:1.0: hub_suspend [ 29.817466] usb usb3: bus auto-suspend, wakeup 1 [ 29.828296] usb usb3: usb auto-resume [ 29.837291] hub 3-0:1.0: hub_resume [ 29.837324] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.837368] hub 3-0:1.0: hub_suspend [ 29.837377] usb usb3: bus auto-suspend, wakeup 1 [ 29.837442] usb usb3: usb auto-resume [ 29.849248] hub 3-0:1.0: hub_resume [ 29.849280] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.849300] hub 3-0:1.0: hub_suspend [ 29.849308] usb usb3: bus auto-suspend, wakeup 1 [ 29.854190] usb usb3: usb auto-resume [ 29.865227] hub 3-0:1.0: hub_resume [ 29.865254] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.865281] hub 3-0:1.0: hub_suspend [ 29.865288] usb usb3: bus auto-suspend, wakeup 1 [ 29.865349] usb usb3: usb auto-resume [ 29.877243] hub 3-0:1.0: hub_resume [ 29.877266] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.877275] hub 3-0:1.0: hub_suspend [ 29.877283] usb usb3: bus auto-suspend, wakeup 1 [ 29.878078] usb usb3: usb auto-resume [ 29.889220] hub 3-0:1.0: hub_resume [ 29.889251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.889303] hub 3-0:1.0: hub_suspend [ 29.889312] usb usb3: bus auto-suspend, wakeup 1 [ 29.889403] usb usb3: usb auto-resume [ 29.901311] hub 3-0:1.0: hub_resume [ 29.901362] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.901388] hub 3-0:1.0: hub_suspend [ 29.901401] usb usb3: bus auto-suspend, wakeup 1 [ 29.957725] usb usb3: usb auto-resume [ 29.957747] hub 3-0:1.0: hub_resume [ 29.957774] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.957795] hub 3-0:1.0: hub_suspend [ 29.957801] usb usb3: bus auto-suspend, wakeup 1 [ 29.957851] usb usb3: usb auto-resume [ 29.973151] hub 3-0:1.0: hub_resume [ 29.973187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.973198] hub 3-0:1.0: hub_suspend [ 29.973206] usb usb3: bus auto-suspend, wakeup 1 [ 29.975455] usb usb3: usb auto-resume [ 29.985249] hub 3-0:1.0: hub_resume [ 29.985308] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.985335] hub 3-0:1.0: hub_suspend [ 29.985343] usb usb3: bus auto-suspend, wakeup 1 [ 29.985414] usb usb3: usb auto-resume [ 29.997131] hub 3-0:1.0: hub_resume [ 29.997161] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.997182] hub 3-0:1.0: hub_suspend [ 29.997190] usb usb3: bus auto-suspend, wakeup 1 [ 30.022258] usb usb3: usb auto-resume [ 30.022279] hub 3-0:1.0: hub_resume [ 30.022305] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.022325] hub 3-0:1.0: hub_suspend [ 30.022331] usb usb3: bus auto-suspend, wakeup 1 [ 30.022378] usb usb3: usb auto-resume [ 30.033130] hub 3-0:1.0: hub_resume [ 30.033192] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.033216] hub 3-0:1.0: hub_suspend [ 30.033224] usb usb3: bus auto-suspend, wakeup 1 [ 30.062339] usb usb3: usb auto-resume [ 30.062361] hub 3-0:1.0: hub_resume [ 30.062427] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.062483] hub 3-0:1.0: hub_suspend [ 30.062489] usb usb3: bus auto-suspend, wakeup 1 [ 30.090091] usb usb3: usb auto-resume [ 30.090115] hub 3-0:1.0: hub_resume [ 30.090149] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.090178] hub 3-0:1.0: hub_suspend [ 30.090186] usb usb3: bus auto-suspend, wakeup 1 [ 30.090218] usb usb3: usb auto-resume [ 30.101062] hub 3-0:1.0: hub_resume [ 30.101099] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.101130] hub 3-0:1.0: hub_suspend [ 30.101139] usb usb3: bus auto-suspend, wakeup 1 [ 30.176238] usb usb3: usb auto-resume [ 30.176264] hub 3-0:1.0: hub_resume [ 30.176295] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.176321] hub 3-0:1.0: hub_suspend [ 30.176330] usb usb3: bus auto-suspend, wakeup 1 [ 30.176400] usb usb3: usb auto-resume [ 30.185028] hub 3-0:1.0: hub_resume [ 30.185094] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.185120] hub 3-0:1.0: hub_suspend [ 30.185132] usb usb3: bus auto-suspend, wakeup 1 [ 30.201869] usb usb3: usb auto-resume [ 30.201891] hub 3-0:1.0: hub_resume [ 30.201935] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.201952] hub 3-0:1.0: hub_suspend [ 30.201960] usb usb3: bus auto-suspend, wakeup 1 [ 30.201983] usb usb3: usb auto-resume [ 30.213086] hub 3-0:1.0: hub_resume [ 30.213155] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.213175] hub 3-0:1.0: hub_suspend [ 30.213196] usb usb3: bus auto-suspend, wakeup 1 [ 30.216508] usb usb3: usb auto-resume [ 30.225127] hub 3-0:1.0: hub_resume [ 30.225222] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.225243] hub 3-0:1.0: hub_suspend [ 30.225251] usb usb3: bus auto-suspend, wakeup 1 [ 30.225346] usb usb3: usb auto-resume [ 30.237009] hub 3-0:1.0: hub_resume [ 30.237064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.237112] hub 3-0:1.0: hub_suspend [ 30.237118] usb usb3: bus auto-suspend, wakeup 1 [ 30.263518] usb usb3: usb auto-resume [ 30.263540] hub 3-0:1.0: hub_resume [ 30.263603] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.263661] hub 3-0:1.0: hub_suspend [ 30.263667] usb usb3: bus auto-suspend, wakeup 1 [ 30.266782] usb usb3: usb auto-resume [ 30.277046] hub 3-0:1.0: hub_resume [ 30.277145] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.277165] hub 3-0:1.0: hub_suspend [ 30.277172] usb usb3: bus auto-suspend, wakeup 1 [ 30.277203] usb usb3: usb auto-resume [ 30.288946] hub 3-0:1.0: hub_resume [ 30.288980] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.288992] hub 3-0:1.0: hub_suspend [ 30.289002] usb usb3: bus auto-suspend, wakeup 1 [ 30.305217] usb usb3: usb auto-resume [ 30.305241] hub 3-0:1.0: hub_resume [ 30.305276] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.305304] hub 3-0:1.0: hub_suspend [ 30.305313] usb usb3: bus auto-suspend, wakeup 1 [ 30.305335] usb usb3: usb auto-resume [ 30.317008] hub 3-0:1.0: hub_resume [ 30.317123] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.317165] hub 3-0:1.0: hub_suspend [ 30.317173] usb usb3: bus auto-suspend, wakeup 1 [ 31.391479] usb usb3: usb auto-resume [ 31.391506] hub 3-0:1.0: hub_resume [ 31.391589] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.391659] hub 3-0:1.0: hub_suspend [ 31.391669] usb usb3: bus auto-suspend, wakeup 1 [ 31.700703] usb usb3: usb auto-resume [ 31.700730] hub 3-0:1.0: hub_resume [ 31.700807] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.700835] hub 3-0:1.0: hub_suspend [ 31.700843] usb usb3: bus auto-suspend, wakeup 1 [ 31.723082] usb usb3: usb auto-resume [ 31.723106] hub 3-0:1.0: hub_resume [ 31.723181] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.723233] hub 3-0:1.0: hub_suspend [ 31.723241] usb usb3: bus auto-suspend, wakeup 1 [ 31.727157] usb usb3: usb auto-resume [ 31.736048] hub 3-0:1.0: hub_resume [ 31.736130] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.736188] hub 3-0:1.0: hub_suspend [ 31.736200] usb usb3: bus auto-suspend, wakeup 1 [ 31.736301] usb usb3: usb auto-resume [ 31.748002] hub 3-0:1.0: hub_resume [ 31.748092] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.748119] hub 3-0:1.0: hub_suspend [ 31.748129] usb usb3: bus auto-suspend, wakeup 1 [ 31.752282] usb usb3: usb auto-resume [ 31.764075] hub 3-0:1.0: hub_resume [ 31.764188] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.764224] hub 3-0:1.0: hub_suspend [ 31.764234] usb usb3: bus auto-suspend, wakeup 1 [ 31.764272] usb usb3: usb auto-resume [ 31.776058] hub 3-0:1.0: hub_resume [ 31.776153] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.776187] hub 3-0:1.0: hub_suspend [ 31.776196] usb usb3: bus auto-suspend, wakeup 1 [ 31.817399] usb usb3: usb auto-resume [ 31.817421] hub 3-0:1.0: hub_resume [ 31.817484] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.817527] hub 3-0:1.0: hub_suspend [ 31.817534] usb usb3: bus auto-suspend, wakeup 1 [ 31.832547] usb usb3: usb auto-resume [ 31.832570] hub 3-0:1.0: hub_resume [ 31.832633] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.832675] hub 3-0:1.0: hub_suspend [ 31.832681] usb usb3: bus auto-suspend, wakeup 1 [ 31.951911] usb usb3: usb auto-resume [ 31.951933] hub 3-0:1.0: hub_resume [ 31.951992] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.952032] hub 3-0:1.0: hub_suspend [ 31.952038] usb usb3: bus auto-suspend, wakeup 1 [ 33.950607] usb 1-1.4: usb auto-suspend, wakeup 0 [ 42.141763] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 42.165215] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Attachment:
0001-drm-i915-initialize-gt_lock-early-with-other-spin-lo.patch
Description: Binary data
Attachment:
3.11.0-rc2-next20130725-4-iniza-small.patch
Description: Binary data
Attachment:
config-3.11.0-rc2-next20130725-4-iniza-small
Description: Binary data
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
