[PATCH 04/15] drm/i915: Use BIT() when dealing with output types

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Most places that deal with output types already use BIT()
but a few places still use manual shifts. Convert the
stragglers over to BIT().

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/g4x_hdmi.c            | 4 ++--
 drivers/gpu/drm/i915/display/intel_crt.c           | 2 +-
 drivers/gpu/drm/i915/display/intel_display.c       | 4 ++--
 drivers/gpu/drm/i915/display/intel_display_types.h | 9 +++++----
 drivers/gpu/drm/i915/display/intel_dvo.c           | 4 ++--
 5 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c b/drivers/gpu/drm/i915/display/g4x_hdmi.c
index 5fbd2ae95869..5606c667e422 100644
--- a/drivers/gpu/drm/i915/display/g4x_hdmi.c
+++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
@@ -585,7 +585,7 @@ void g4x_hdmi_init(struct drm_i915_private *dev_priv,
 	} else {
 		intel_encoder->pipe_mask = ~0;
 	}
-	intel_encoder->cloneable = 1 << INTEL_OUTPUT_ANALOG;
+	intel_encoder->cloneable = BIT(INTEL_OUTPUT_ANALOG);
 	intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
 	/*
 	 * BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems
@@ -593,7 +593,7 @@ void g4x_hdmi_init(struct drm_i915_private *dev_priv,
 	 * only one port anyway, nothing is lost by allowing it.
 	 */
 	if (IS_G4X(dev_priv))
-		intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI;
+		intel_encoder->cloneable |= BIT(INTEL_OUTPUT_HDMI);
 
 	dig_port->hdmi.hdmi_reg = hdmi_reg;
 	dig_port->dp.output_reg = INVALID_MMIO_REG;
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 4a8ff2f97608..eba58345619a 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -1044,7 +1044,7 @@ void intel_crt_init(struct drm_i915_private *dev_priv)
 	intel_connector_attach_encoder(intel_connector, &crt->base);
 
 	crt->base.type = INTEL_OUTPUT_ANALOG;
-	crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
+	crt->base.cloneable = BIT(INTEL_OUTPUT_DVO) | BIT(INTEL_OUTPUT_HDMI);
 	if (IS_I830(dev_priv))
 		crt->base.pipe_mask = BIT(PIPE_A);
 	else
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 2d0018ae34b1..53b7ee6e8a0a 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4565,8 +4565,8 @@ static bool encoders_cloneable(const struct intel_encoder *a,
 			       const struct intel_encoder *b)
 {
 	/* masks could be asymmetric, so check both ways */
-	return a == b || (a->cloneable & (1 << b->type) &&
-			  b->cloneable & (1 << a->type));
+	return a == b || (a->cloneable & BIT(b->type) &&
+			  b->cloneable & BIT(a->type));
 }
 
 static bool check_single_encoder_cloning(struct intel_atomic_state *state,
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 3b7945aad22a..11f083cf1124 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -2040,15 +2040,16 @@ static inline bool
 intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
 		    enum intel_output_type type)
 {
-	return crtc_state->output_types & (1 << type);
+	return crtc_state->output_types & BIT(type);
 }
+
 static inline bool
 intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state)
 {
 	return crtc_state->output_types &
-		((1 << INTEL_OUTPUT_DP) |
-		 (1 << INTEL_OUTPUT_DP_MST) |
-		 (1 << INTEL_OUTPUT_EDP));
+		(BIT(INTEL_OUTPUT_DP) |
+		 BIT(INTEL_OUTPUT_DP_MST) |
+		 BIT(INTEL_OUTPUT_EDP));
 }
 
 static inline bool
diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c
index 5572e43026e4..167c9b7318f8 100644
--- a/drivers/gpu/drm/i915/display/intel_dvo.c
+++ b/drivers/gpu/drm/i915/display/intel_dvo.c
@@ -491,8 +491,8 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
 		intel_encoder->pipe_mask = ~0;
 
 		if (dvo->type != INTEL_DVO_CHIP_LVDS)
-			intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
-				(1 << INTEL_OUTPUT_DVO);
+			intel_encoder->cloneable = BIT(INTEL_OUTPUT_ANALOG) |
+				BIT(INTEL_OUTPUT_DVO);
 
 		switch (dvo->type) {
 		case INTEL_DVO_CHIP_TMDS:
-- 
2.35.1




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux