Re: [PATCH 06/11] drm/i915: Match all PSR mode entry conditions before enabling it.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2013/7/11 Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>:
> v2: Prefer seq_puts to seq_printf by Paulo Zanoni.
> v3: small changes like avoiding calling dp_to_dig_port twice as noticed by
>     Paulo Zanoni.
> v4: Avoiding reading non-existent registers - noticed by Paulo
>     on first psr debugfs patch.
> v5: Accepting more suggestions from Paulo:
>     * check sw interlace flag instead of i915_read
>     * introduce PSR_S3D_ENABLED to avoid forgeting it whenever added.
>
> Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 44 ++++++++++++++++++----
>  drivers/gpu/drm/i915/i915_drv.h     | 13 +++++++
>  drivers/gpu/drm/i915/i915_reg.h     |  7 ++++
>  drivers/gpu/drm/i915/intel_dp.c     | 74 ++++++++++++++++++++++++++++++++++++-
>  4 files changed, 130 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index fe3cd5a..e679968 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1948,17 +1948,47 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
>         struct drm_info_node *node = m->private;
>         struct drm_device *dev = node->minor->dev;
>         struct drm_i915_private *dev_priv = dev->dev_private;
> -       u32 psrctl, psrstat, psrperf;
> +       u32 psrstat, psrperf;
>
> -       if (!IS_HASWELL(dev)) {
> -               seq_puts(m, "PSR not supported on this platform\n");
> +       if (IS_HASWELL(dev) && I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE) {
> +               seq_puts(m, "PSR enabled\n");
> +       } else {

If we're not Haswell we fall on this "else" case, then we print "PSR
disabled" and look at no_psr_reason.

With that fixed: Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>

> +               seq_puts(m, "PSR disabled: ");
> +               switch (dev_priv->no_psr_reason) {
> +               case PSR_NO_SOURCE:
> +                       seq_puts(m, "not supported on this platform");
> +                       break;
> +               case PSR_NO_SINK:
> +                       seq_puts(m, "not supported by panel");
> +                       break;
> +               case PSR_CRTC_NOT_ACTIVE:
> +                       seq_puts(m, "crtc not active");
> +                       break;
> +               case PSR_PWR_WELL_ENABLED:
> +                       seq_puts(m, "power well enabled");
> +                       break;
> +               case PSR_NOT_TILED:
> +                       seq_puts(m, "not tiled");
> +                       break;
> +               case PSR_SPRITE_ENABLED:
> +                       seq_puts(m, "sprite enabled");
> +                       break;
> +               case PSR_S3D_ENABLED:
> +                       seq_puts(m, "stereo 3d enabled");
> +                       break;
> +               case PSR_INTERLACED_ENABLED:
> +                       seq_puts(m, "interlaced enabled");
> +                       break;
> +               case PSR_HSW_NOT_DDIA:
> +                       seq_puts(m, "HSW ties PSR to DDI A (eDP)");
> +                       break;
> +               default:
> +                       seq_puts(m, "unknown reason");
> +               }
> +               seq_puts(m, "\n");
>                 return 0;
>         }
>
> -       psrctl = I915_READ(EDP_PSR_CTL);
> -       seq_printf(m, "PSR Enabled: %s\n",
> -                  yesno(psrctl & EDP_PSR_ENABLE));
> -
>         psrstat = I915_READ(EDP_PSR_STATUS_CTL);
>
>         seq_puts(m, "PSR Current State: ");
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 842aada..d0b9483 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -560,6 +560,17 @@ struct i915_fbc {
>         } no_fbc_reason;
>  };
>
> +enum no_psr_reason {
> +       PSR_NO_SOURCE, /* Not supported on platform */
> +       PSR_NO_SINK, /* Not supported by panel */
> +       PSR_CRTC_NOT_ACTIVE,
> +       PSR_PWR_WELL_ENABLED,
> +       PSR_NOT_TILED,
> +       PSR_SPRITE_ENABLED,
> +       PSR_S3D_ENABLED,
> +       PSR_INTERLACED_ENABLED,
> +       PSR_HSW_NOT_DDIA,
> +};
>
>  enum intel_pch {
>         PCH_NONE = 0,   /* No PCH present */
> @@ -1161,6 +1172,8 @@ typedef struct drm_i915_private {
>         /* Haswell power well */
>         struct i915_power_well power_well;
>
> +       enum no_psr_reason no_psr_reason;
> +
>         struct i915_gpu_error gpu_error;
>
>         struct drm_i915_gem_object *vlv_pctx;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b328ec6..3bca337 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4150,6 +4150,13 @@
>  #define HSW_TVIDEO_DIP_VSC_DATA(trans) \
>          _TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
>
> +#define HSW_STEREO_3D_CTL_A    0x70020
> +#define   S3D_ENABLE           (1<<31)
> +#define HSW_STEREO_3D_CTL_B    0x71020
> +
> +#define HSW_STEREO_3D_CTL(trans) \
> +       _TRANSCODER(trans, HSW_STEREO_3D_CTL_A, HSW_STEREO_3D_CTL_A)
> +
>  #define _PCH_TRANS_HTOTAL_B          0xe1000
>  #define _PCH_TRANS_HBLANK_B          0xe1004
>  #define _PCH_TRANS_HSYNC_B           0xe1008
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index d4b52a9..c0bd887 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1497,11 +1497,83 @@ static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
>                    EDP_PSR_ENABLE);
>  }
>
> +static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
> +{
> +       struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +       struct drm_device *dev = dig_port->base.base.dev;
> +       struct drm_i915_private *dev_priv = dev->dev_private;
> +       struct drm_crtc *crtc = dig_port->base.base.crtc;
> +       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +       struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj;
> +       struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> +
> +       if (!IS_HASWELL(dev)) {
> +               DRM_DEBUG_KMS("PSR not supported on this platform\n");
> +               dev_priv->no_psr_reason = PSR_NO_SOURCE;
> +               return false;
> +       }
> +
> +       if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
> +           (dig_port->port != PORT_A)) {
> +               DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
> +               dev_priv->no_psr_reason = PSR_HSW_NOT_DDIA;
> +               return false;
> +       }
> +
> +       if (!is_edp_psr(intel_dp)) {
> +               DRM_DEBUG_KMS("PSR not supported by this panel\n");
> +               dev_priv->no_psr_reason = PSR_NO_SINK;
> +               return false;
> +       }
> +
> +       if (!intel_crtc->active || !crtc->fb || !crtc->mode.clock) {
> +               DRM_DEBUG_KMS("crtc not active for PSR\n");
> +               dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
> +               return false;
> +       }
> +
> +       if ((I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_ENABLE) ||
> +           (I915_READ(HSW_PWR_WELL_KVMR) & HSW_PWR_WELL_ENABLE)) {
> +               DRM_DEBUG_KMS("PSR condition failed: Power Well is Enabled\n");
> +               dev_priv->no_psr_reason = PSR_PWR_WELL_ENABLED;
> +               return false;
> +       }
> +
> +       if (obj->tiling_mode != I915_TILING_X ||
> +           obj->fence_reg == I915_FENCE_REG_NONE) {
> +               DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
> +               dev_priv->no_psr_reason = PSR_NOT_TILED;
> +               return false;
> +       }
> +
> +       if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) {
> +               DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n");
> +               dev_priv->no_psr_reason = PSR_SPRITE_ENABLED;
> +               return false;
> +       }
> +
> +       if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) &
> +           S3D_ENABLE) {
> +               DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
> +               dev_priv->no_psr_reason = PSR_S3D_ENABLED;
> +               return false;
> +       }
> +
> +       if (crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
> +               DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
> +               dev_priv->no_psr_reason = PSR_INTERLACED_ENABLED;
> +               return false;
> +       }
> +
> +       return true;
> +}
> +
>  void intel_edp_psr_enable(struct intel_dp *intel_dp)
>  {
>         struct drm_device *dev = intel_dp_to_dev(intel_dp);
>
> -       if (!is_edp_psr(intel_dp) || intel_edp_is_psr_enabled(dev))
> +       if (!intel_edp_psr_match_conditions(intel_dp) ||
> +           intel_edp_is_psr_enabled(dev))
>                 return;
>
>         /* Setup PSR once */
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux