[PATCH 13/14] drm/i915: extract rps interrupt enable/disable helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2013/7/4 Daniel Vetter <daniel.vetter at ffwll.ch>:
> This just unifies the vlv code with the snb-hsw code which matched
> exactly before the VECS enabling.

So now the VLV code is behaving differently. Is that intentional? You
could write about the implications here.


>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 59 ++++++++++++++++++++---------------------
>  1 file changed, 29 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 96f0872..787a528 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3121,13 +3121,10 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
>         trace_intel_gpu_freq_change(vlv_gpu_freq(dev_priv->mem_freq, val));
>  }
>
> -
> -static void gen6_disable_rps(struct drm_device *dev)
> +static void gen6_disable_rps_interrupts(struct drm_device *dev)
>  {
>         struct drm_i915_private *dev_priv = dev->dev_private;
>
> -       I915_WRITE(GEN6_RC_CONTROL, 0);
> -       I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
>         I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
>         I915_WRITE(GEN6_PMIER, I915_READ(GEN6_PMIER) & ~GEN6_PM_RPS_EVENTS);
>         /* Complete PM interrupt masking here doesn't race with the rps work
> @@ -3142,23 +3139,23 @@ static void gen6_disable_rps(struct drm_device *dev)
>         I915_WRITE(GEN6_PMIIR, GEN6_PM_RPS_EVENTS);
>  }
>
> -static void valleyview_disable_rps(struct drm_device *dev)
> +static void gen6_disable_rps(struct drm_device *dev)
>  {
>         struct drm_i915_private *dev_priv = dev->dev_private;
>
>         I915_WRITE(GEN6_RC_CONTROL, 0);
> -       I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
> -       I915_WRITE(GEN6_PMIER, 0);
> -       /* Complete PM interrupt masking here doesn't race with the rps work
> -        * item again unmasking PM interrupts because that is using a different
> -        * register (PMIMR) to mask PM interrupts. The only risk is in leaving
> -        * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
> +       I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
>
> -       spin_lock_irq(&dev_priv->irq_lock);
> -       dev_priv->rps.pm_iir = 0;
> -       spin_unlock_irq(&dev_priv->irq_lock);
> +       gen6_disable_rps_interrupts(dev);
> +}
> +
> +static void valleyview_disable_rps(struct drm_device *dev)
> +{
> +       struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +       I915_WRITE(GEN6_RC_CONTROL, 0);
>
> -       I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
> +       gen6_disable_rps_interrupts(dev);
>
>         if (dev_priv->vlv_pctx) {
>                 drm_gem_object_unreference(&dev_priv->vlv_pctx->base);
> @@ -3191,6 +3188,21 @@ int intel_enable_rc6(const struct drm_device *dev)
>         return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
>  }
>
> +static void gen6_enable_rps_interrupts(struct drm_device *dev)
> +{
> +       struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +       spin_lock_irq(&dev_priv->irq_lock);
> +       /* FIXME: Our interrupt enabling sequence is bonghits.
> +        * dev_priv->rps.pm_iir really should be 0 here. */
> +       dev_priv->rps.pm_iir = 0;
> +       I915_WRITE(GEN6_PMIMR, I915_READ(GEN6_PMIMR) & ~GEN6_PM_RPS_EVENTS);
> +       I915_WRITE(GEN6_PMIIR, GEN6_PM_RPS_EVENTS);
> +       spin_unlock_irq(&dev_priv->irq_lock);
> +       /* unmask all PM interrupts */
> +       I915_WRITE(GEN6_PMINTRMSK, 0);
> +}
> +
>  static void gen6_enable_rps(struct drm_device *dev)
>  {
>         struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3319,15 +3331,7 @@ static void gen6_enable_rps(struct drm_device *dev)
>
>         gen6_set_rps(dev_priv->dev, (gt_perf_status & 0xff00) >> 8);
>
> -       spin_lock_irq(&dev_priv->irq_lock);
> -       /* FIXME: Our interrupt enabling sequence is bonghits.
> -        * dev_priv->rps.pm_iir really should be 0 here. */
> -       dev_priv->rps.pm_iir = 0;
> -       I915_WRITE(GEN6_PMIMR, I915_READ(GEN6_PMIMR) & ~GEN6_PM_RPS_EVENTS);
> -       I915_WRITE(GEN6_PMIIR, GEN6_PM_RPS_EVENTS);
> -       spin_unlock_irq(&dev_priv->irq_lock);
> -       /* unmask all PM interrupts */
> -       I915_WRITE(GEN6_PMINTRMSK, 0);
> +       gen6_enable_rps_interrupts(dev);
>
>         rc6vids = 0;
>         ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids);
> @@ -3597,12 +3601,7 @@ static void valleyview_enable_rps(struct drm_device *dev)
>
>         valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay);
>
> -       spin_lock_irq(&dev_priv->irq_lock);
> -       WARN_ON(dev_priv->rps.pm_iir != 0);
> -       I915_WRITE(GEN6_PMIMR, 0);
> -       spin_unlock_irq(&dev_priv->irq_lock);
> -       /* enable all PM interrupts */
> -       I915_WRITE(GEN6_PMINTRMSK, 0);
> +       gen6_enable_rps_interrupts(dev);
>
>         gen6_gt_force_wake_put(dev_priv);
>  }
> --
> 1.8.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux