Originally I've thought that this fixes up the reset issues on my
gm45, but that was just a red herring due to b0rked testing.
Still I much prefer writing the right values (all other fields are
reserved) instead of potentially dragging gunk around. Hence also
clear the register to 0 after a reset.
Note that Cspec is a bit confused and doesn't explicitly say that all
the other bits in this register are "reserved, mbz" like usually.
Instead they're marked as "r/o, default value = 0" which semantically
amounts to the same thing.
v2: Stop claiming this fixes anything and return 0 if successful
instead of stack garbage.
v3: Pimp the commit message to explain exactly why I think the docs
allow us to ditch the rmw cycle, spurred by a discussion with Chris.
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index e6dc81c..5400d2b 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -798,28 +798,29 @@ static int i965_reset_complete(struct drm_device *dev)
static int i965_do_reset(struct drm_device *dev)
{
int ret;
- u8 gdrst;
/*
* Set the domains we want to reset (GRDOM/bits 2 and 3) as
* well as the reset bit (GR/bit 0). Setting the GR bit
* triggers the reset; when done, the hardware will clear it.
*/
- pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST,
- gdrst | GRDOM_RENDER |
- GRDOM_RESET_ENABLE);
+ GRDOM_RENDER | GRDOM_RESET_ENABLE);
ret = wait_for(i965_reset_complete(dev), 500);
if (ret)
return ret;
/* We can't reset render&media without also resetting display ... */
- pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST,
- gdrst | GRDOM_MEDIA |
- GRDOM_RESET_ENABLE);
+ GRDOM_MEDIA | GRDOM_RESET_ENABLE);
- return wait_for(i965_reset_complete(dev), 500);
+ ret = wait_for(i965_reset_complete(dev), 500);
+ if (ret)
+ return ret;
+
+ pci_write_config_byte(dev->pdev, I965_GDRST, 0);
+
+ return 0;
}
static int ironlake_do_reset(struct drm_device *dev)
--
1.8.3.2
