Adding support for PSR Status, PSR entry counter and performance counters.
Heavily based on initial work from Shobhit.
v2: Fix PSR Status Link bits by Paulo Zanoni.
v3: Prefer seq_puts to seq_printf by Paulo Zanoni.
v4: Fix identation by Paulo Zanoni.
v5: Return earlier if it isn't Haswell in order to avoid reading non-existing
registers - by Paulo Zanoni.
CC: Paulo Zanoni <paulo.r.zanoni at intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Credits-by: Shobhit Kumar <shobhit.kumar at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 95 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 24 ++++++++++
2 files changed, 119 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index a188624..bbdcdae 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1877,6 +1877,100 @@ static int i915_dpio_info(struct seq_file *m, void *data)
return 0;
}
+static int i915_edp_psr_status(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 psrctl, psrstat, psrperf;
+
+ if (!IS_HASWELL(dev)) {
+ seq_puts(m, "PSR not supported on this platform\n");
+ return 0;
+ }
+
+ psrctl = I915_READ(EDP_PSR_CTL);
+ seq_printf(m, "PSR Enabled: %s\n",
+ yesno(psrctl & EDP_PSR_ENABLE));
+
+ psrstat = I915_READ(EDP_PSR_STATUS_CTL);
+
+ seq_puts(m, "PSR Current State: ");
+ switch (psrstat & EDP_PSR_STATUS_STATE_MASK) {
+ case EDP_PSR_STATUS_STATE_IDLE:
+ seq_puts(m, "Reset state\n");
+ break;
+ case EDP_PSR_STATUS_STATE_SRDONACK:
+ seq_puts(m, "Wait for TG/Stream to send on frame of data after SRD conditions are met\n");
+ break;
+ case EDP_PSR_STATUS_STATE_SRDENT:
+ seq_puts(m, "SRD entry\n");
+ break;
+ case EDP_PSR_STATUS_STATE_BUFOFF:
+ seq_puts(m, "Wait for buffer turn off\n");
+ break;
+ case EDP_PSR_STATUS_STATE_BUFON:
+ seq_puts(m, "Wait for buffer turn on\n");
+ break;
+ case EDP_PSR_STATUS_STATE_AUXACK:
+ seq_puts(m, "Wait for AUX to acknowledge on SRD exit\n");
+ break;
+ case EDP_PSR_STATUS_STATE_SRDOFFACK:
+ seq_puts(m, "Wait for TG/Stream to acknowledge the SRD VDM exit\n");
+ break;
+ default:
+ seq_puts(m, "Unknown\n");
+ break;
+ }
+
+ seq_puts(m, "Link Status: ");
+ switch (psrstat & EDP_PSR_STATUS_LINK_MASK) {
+ case EDP_PSR_STATUS_LINK_FULL_OFF:
+ seq_puts(m, "Link is fully off\n");
+ break;
+ case EDP_PSR_STATUS_LINK_FULL_ON:
+ seq_puts(m, "Link is fully on\n");
+ break;
+ case EDP_PSR_STATUS_LINK_STANDBY:
+ seq_puts(m, "Link is in standby\n");
+ break;
+ default:
+ seq_puts(m, "Unknown\n");
+ break;
+ }
+
+ seq_printf(m, "PSR Entry Count: %u\n",
+ psrstat >> EDP_PSR_STATUS_COUNT_SHIFT &
+ EDP_PSR_STATUS_COUNT_MASK);
+
+ seq_printf(m, "Max Sleep Timer Counter: %u\n",
+ psrstat >> EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT &
+ EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK);
+
+ seq_printf(m, "Had AUX error: %s\n",
+ yesno(psrstat & EDP_PSR_STATUS_AUX_ERROR));
+
+ seq_printf(m, "Sending AUX: %s\n",
+ yesno(psrstat & EDP_PSR_STATUS_AUX_SENDING));
+
+ seq_printf(m, "Sending Idle: %s\n",
+ yesno(psrstat & EDP_PSR_STATUS_SENDING_IDLE));
+
+ seq_printf(m, "Sending TP2 TP3: %s\n",
+ yesno(psrstat & EDP_PSR_STATUS_SENDING_TP2_TP3));
+
+ seq_printf(m, "Sending TP1: %s\n",
+ yesno(psrstat & EDP_PSR_STATUS_SENDING_TP1));
+
+ seq_printf(m, "Idle Count: %u\n",
+ psrstat & EDP_PSR_STATUS_IDLE_MASK);
+
+ psrperf = (I915_READ(EDP_PSR_PERF_CNT)) & EDP_PSR_PERF_CNT_MASK;
+ seq_printf(m, "Performance Counter: %u\n", psrperf);
+
+ return 0;
+}
+
static int
i915_wedged_get(void *data, u64 *val)
{
@@ -2306,6 +2400,7 @@ static struct drm_info_list i915_debugfs_list[] = {
{"i915_swizzle_info", i915_swizzle_info, 0},
{"i915_ppgtt_info", i915_ppgtt_info, 0},
{"i915_dpio", i915_dpio_info, 0},
+ {"i915_edp_psr_status", i915_edp_psr_status, 0},
};
#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index caf57d8..833cc97 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1812,6 +1812,30 @@
#define EDP_PSR_STATUS_CTL 0x64840
#define EDP_PSR_STATUS_STATE_MASK (7<<29)
+#define EDP_PSR_STATUS_STATE_IDLE (0<<29)
+#define EDP_PSR_STATUS_STATE_SRDONACK (1<<29)
+#define EDP_PSR_STATUS_STATE_SRDENT (2<<29)
+#define EDP_PSR_STATUS_STATE_BUFOFF (3<<29)
+#define EDP_PSR_STATUS_STATE_BUFON (4<<29)
+#define EDP_PSR_STATUS_STATE_AUXACK (5<<29)
+#define EDP_PSR_STATUS_STATE_SRDOFFACK (6<<29)
+#define EDP_PSR_STATUS_LINK_MASK (3<<26)
+#define EDP_PSR_STATUS_LINK_FULL_OFF (0<<26)
+#define EDP_PSR_STATUS_LINK_FULL_ON (1<<26)
+#define EDP_PSR_STATUS_LINK_STANDBY (2<<26)
+#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT 20
+#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK 0x1f
+#define EDP_PSR_STATUS_COUNT_SHIFT 16
+#define EDP_PSR_STATUS_COUNT_MASK 0xf
+#define EDP_PSR_STATUS_AUX_ERROR (1<<15)
+#define EDP_PSR_STATUS_AUX_SENDING (1<<12)
+#define EDP_PSR_STATUS_SENDING_IDLE (1<<9)
+#define EDP_PSR_STATUS_SENDING_TP2_TP3 (1<<8)
+#define EDP_PSR_STATUS_SENDING_TP1 (1<<4)
+#define EDP_PSR_STATUS_IDLE_MASK 0xf
+
+#define EDP_PSR_PERF_CNT 0x64844
+#define EDP_PSR_PERF_CNT_MASK 0xffffff
#define EDP_PSR_DEBUG_CTL 0x64860
#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
--
1.8.1.4
