Now that we have the proper pipe config to track this, we don't need
to write any registers any more.
Note that for platforms without DPLL_MD (pre-gen4) which store the
pixel mutliplier in the DPLL register I've decided to keep the
seemingly "redundant" write: The comment right below saying "do this
trice for luck" doesn't instill confidence ...
v2: Drop a few now unnecessary local variables and switch the enable
function to take a struct intel_crtc * to simply arguments.
v3: Rebase on top of the newly-colored BUG_ON.
v4: Amend commit message to alliviate Imre's comment about the
redudant DPLL write for the pixel mutliplier.
Cc: Imre Deak <imre.deak at intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 100 +++++++++++++----------------------
1 file changed, 36 insertions(+), 64 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f66eee9..7c0d107 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1310,32 +1310,48 @@ static void vlv_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
udelay(150); /* wait for warmup */
}
-static void i9xx_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+static void i9xx_enable_pll(struct intel_crtc *crtc)
{
- int reg;
- u32 val;
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int reg = DPLL(crtc->pipe);
+ u32 dpll = crtc->config.dpll_hw_state.dpll;
- assert_pipe_disabled(dev_priv, pipe);
+ assert_pipe_disabled(dev_priv, crtc->pipe);
/* No really, not for ILK+ */
BUG_ON(dev_priv->info->gen >= 5);
/* PLL is protected by panel, make sure we can write it */
- if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
- assert_panel_unlocked(dev_priv, pipe);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ assert_panel_unlocked(dev_priv, crtc->pipe);
- reg = DPLL(pipe);
- val = I915_READ(reg);
- val |= DPLL_VCO_ENABLE;
+ I915_WRITE(reg, dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(reg);
+ udelay(150);
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ I915_WRITE(DPLL_MD(crtc->pipe),
+ crtc->config.dpll_hw_state.dpll_md);
+ } else {
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(reg, dpll);
+ }
/* We do this three times for luck */
- I915_WRITE(reg, val);
+ I915_WRITE(reg, dpll);
POSTING_READ(reg);
udelay(150); /* wait for warmup */
- I915_WRITE(reg, val);
+ I915_WRITE(reg, dpll);
POSTING_READ(reg);
udelay(150); /* wait for warmup */
- I915_WRITE(reg, val);
+ I915_WRITE(reg, dpll);
POSTING_READ(reg);
udelay(150); /* wait for warmup */
}
@@ -3625,7 +3641,11 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
intel_crtc->active = true;
intel_update_watermarks(dev);
- i9xx_enable_pll(dev_priv, pipe);
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
+
+ i9xx_enable_pll(intel_crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_enable)
@@ -4466,8 +4486,6 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
- int pipe = crtc->pipe;
u32 dpll;
bool is_sdvo;
struct dpll *clock = &crtc->config.dpll;
@@ -4531,37 +4549,14 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
dpll |= DPLL_VCO_ENABLE;
crtc->config.dpll_hw_state.dpll = dpll;
- I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- for_each_encoder_on_crtc(dev, &crtc->base, encoder)
- if (encoder->pre_pll_enable)
- encoder->pre_pll_enable(encoder);
-
- if (crtc->config.has_dp_encoder)
- intel_dp_set_m_n(crtc);
-
- I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
if (INTEL_INFO(dev)->gen >= 4) {
u32 dpll_md = (crtc->config.pixel_multiplier - 1)
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
crtc->config.dpll_hw_state.dpll_md = dpll_md;
-
- I915_WRITE(DPLL_MD(pipe), dpll_md);
- } else {
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(DPLL(pipe), dpll);
}
+
+ if (crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(crtc);
}
static void i8xx_update_pll(struct intel_crtc *crtc,
@@ -4570,8 +4565,6 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
- int pipe = crtc->pipe;
u32 dpll;
struct dpll *clock = &crtc->config.dpll;
@@ -4598,27 +4591,6 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll |= DPLL_VCO_ENABLE;
crtc->config.dpll_hw_state.dpll = dpll;
-
- I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- for_each_encoder_on_crtc(dev, &crtc->base, encoder)
- if (encoder->pre_pll_enable)
- encoder->pre_pll_enable(encoder);
-
- I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(DPLL(pipe), dpll);
}
static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
--
1.7.11.7
