The low voltage sku check can be ignored as OEMs need to consider that
when designing the board and then put any limits in VBT.
Same is now changed in Bspec pages.
v2: Added debug print for combo PHY procmon reference values
to get voltage configuration of combo PHY ports. (Imre)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
---
.../gpu/drm/i915/display/intel_combo_phy.c | 4 +++
drivers/gpu/drm/i915/display/intel_dp.c | 32 ++-----------------
2 files changed, 7 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
index 634e8d449457..01ff86b3ff91 100644
--- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
@@ -112,6 +112,10 @@ static bool icl_verify_procmon_ref_values(struct drm_i915_private *dev_priv,
procmon = icl_get_procmon_ref_values(dev_priv, phy);
+ drm_dbg(&dev_priv->drm,
+ "Combo PHY %c PROCMON values : 0x%x, 0x%x, 0x%x\n",
+ phy_name(phy), procmon->dw1, procmon->dw9, procmon->dw10);
+
ret = check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW1(phy),
(0xff << 16) | 0xff, procmon->dw1);
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW9(phy),
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f5dc2126d140..693d7e097295 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -385,23 +385,13 @@ static int dg2_max_source_rate(struct intel_dp *intel_dp)
return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
}
-static bool is_low_voltage_sku(struct drm_i915_private *i915, enum phy phy)
-{
- u32 voltage;
-
- voltage = intel_de_read(i915, ICL_PORT_COMP_DW3(phy)) & VOLTAGE_INFO_MASK;
-
- return voltage == VOLTAGE_INFO_0_85V;
-}
-
static int icl_max_source_rate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
- if (intel_phy_is_combo(dev_priv, phy) &&
- (is_low_voltage_sku(dev_priv, phy) || !intel_dp_is_edp(intel_dp)))
+ if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
return 540000;
return 810000;
@@ -409,23 +399,7 @@ static int icl_max_source_rate(struct intel_dp *intel_dp)
static int ehl_max_source_rate(struct intel_dp *intel_dp)
{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
- enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
-
- if (intel_dp_is_edp(intel_dp) || is_low_voltage_sku(dev_priv, phy))
- return 540000;
-
- return 810000;
-}
-
-static int dg1_max_source_rate(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
- enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
-
- if (intel_phy_is_combo(i915, phy) && is_low_voltage_sku(i915, phy))
+ if (intel_dp_is_edp(intel_dp))
return 540000;
return 810000;
@@ -468,7 +442,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
max_rate = dg2_max_source_rate(intel_dp);
else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
- max_rate = dg1_max_source_rate(intel_dp);
+ max_rate = 810000;
else if (IS_JSL_EHL(dev_priv))
max_rate = ehl_max_source_rate(intel_dp);
else
--
2.25.1
