We need this for comparing modes between configuration changes.
v2: try harder to calulate non-simple pixel clocks (Daniel)
call get_clock after getting the encoder config, needed for pixel multiply
(Jesse)
v3: drop get_clock now that the pixel_multiply has been moved into
get_pipe_config
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_display.c | 96 +++++++++++++++++++++++++++++++---
drivers/gpu/drm/i915/intel_drv.h | 3 ++
2 files changed, 92 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 924932f..c1826cc 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -45,6 +45,11 @@ bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+
typedef struct {
int min, max;
} intel_range_t;
@@ -4982,6 +4987,11 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
intel_get_pipe_timings(crtc, pipe_config);
+ /* FIXME: SDVO & HDMI pixel repeat */
+ pipe_config->pixel_multiplier = 1;
+
+ i9xx_crtc_clock_get(crtc, pipe_config);
+
return true;
}
@@ -5883,7 +5893,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t tmp;
+ uint32_t tmp, dpa;
tmp = I915_READ(PIPECONF(crtc->pipe));
if (!(tmp & PIPECONF_ENABLE))
@@ -5899,8 +5909,21 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
ironlake_get_fdi_m_n_config(crtc, pipe_config);
}
+ dpa = I915_READ(DP_A);
+ if ((dpa & DP_PORT_EN) && ((dpa & DP_PIPE_MASK) >> 30) == crtc->pipe) {
+ if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
+ pipe_config->cpu_edp_link_rate = 162000;
+ else
+ pipe_config->cpu_edp_link_rate = 270000;
+ }
+
intel_get_pipe_timings(crtc, pipe_config);
+ /* FIXME: SDVO & HDMI pixel repeat */
+ pipe_config->pixel_multiplier = 1;
+
+ ironlake_crtc_clock_get(crtc, pipe_config);
+
return true;
}
@@ -6049,6 +6072,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
intel_get_pipe_timings(crtc, pipe_config);
+ /* FIXME: SDVO & HDMI pixel repeat */
+ pipe_config->pixel_multiplier = 1;
+
+ ironlake_crtc_clock_get(crtc, pipe_config);
+
return true;
}
@@ -6910,11 +6938,12 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
}
/* Returns the clock of the currently programmed mode of the given pipe. */
-static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ int pipe = pipe_config->cpu_transcoder;
u32 dpll = I915_READ(DPLL(pipe));
u32 fp;
intel_clock_t clock;
@@ -6953,7 +6982,8 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
default:
DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
"mode\n", (int)(dpll & DPLL_MODE_MASK));
- return 0;
+ pipe_config->adjusted_mode.clock = 0;
+ return;
}
/* XXX: Handle the 100Mhz refclk */
@@ -6992,8 +7022,56 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
* i830PllIsValid() because it relies on the xf86_config connector
* configuration being accurate, which it isn't necessarily.
*/
+ pipe_config->adjusted_mode.clock = clock.dot;
+}
+
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ int link_freq, repeat;
+ u64 clock;
+ u32 link_m, link_n;
+
+ /* FIXME: Haswell bits */
+
+ repeat = pipe_config->pixel_multiplier;
+
+ /*
+ * The calculation for the data clock is:
+ * pixel_clock = ((m/n)*(link_clock * nr_lanes * repeat))/bpp
+ * But we want to avoid losing precison if possible, so:
+ * pixel_clock = ((m * link_clock * nr_lanes * repeat)/(n*bpp))
+ *
+ * and the link clock is simpler:
+ * link_clock = (m * link_clock * repeat) / n
+ */
+
+ /*
+ * We need to get the FDI or DP link clock here to derive
+ * the M/N dividers.
+ *
+ * For FDI, we read it from the BIOS or use a fixed 2.7GHz.
+ * For DP, it's either 1.62GHz or 2.7GHz.
+ * We do our calculations in 10*MHz since we don't need much precison.
+ */
+ if (pipe_config->has_pch_encoder)
+ link_freq = intel_fdi_link_freq(dev) * 10000;
+ else
+ link_freq = pipe_config->cpu_edp_link_rate;
+
+ link_m = I915_READ(PIPE_LINK_M1(cpu_transcoder));
+ link_n = I915_READ(PIPE_LINK_N1(cpu_transcoder));
- return clock.dot;
+ if (!link_m || !link_n)
+ return;
+
+ clock = (u64)link_m * (u64)link_freq * (u64)repeat;
+ do_div(clock, link_n);
+
+ pipe_config->adjusted_mode.clock = clock;
}
/** Returns the currently programmed mode of the given pipe. */
@@ -7004,6 +7082,7 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
struct drm_display_mode *mode;
+ struct intel_crtc_config pipe_config;
int htot = I915_READ(HTOTAL(cpu_transcoder));
int hsync = I915_READ(HSYNC(cpu_transcoder));
int vtot = I915_READ(VTOTAL(cpu_transcoder));
@@ -7013,7 +7092,10 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
if (!mode)
return NULL;
- mode->clock = intel_crtc_clock_get(dev, crtc);
+ pipe_config.cpu_transcoder = intel_crtc->pipe;
+ i9xx_crtc_clock_get(intel_crtc, &pipe_config);
+
+ mode->clock = pipe_config.adjusted_mode.clock;
mode->hdisplay = (htot & 0xffff) + 1;
mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
mode->hsync_start = (hsync & 0xffff) + 1;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index abc4aa8..622acf0 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -265,6 +265,9 @@ struct intel_crtc_config {
/* FDI configuration, only valid if has_pch_encoder is set. */
int fdi_lanes;
struct intel_link_m_n fdi_m_n;
+
+ /* CPU eDP config */
+ int cpu_edp_link_rate;
};
struct intel_crtc {
--
1.7.9.5
