We were only handling X and width granularity, what was causing issues
when sink had a granularity different than 4.
While at it, renaming su_x_granularity to su_w_granularity to better
match reality.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
---
.../drm/i915/display/intel_display_types.h | 4 +-
drivers/gpu/drm/i915/display/intel_psr.c | 110 ++++++++++++------
2 files changed, 80 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 15e91a99c8b9a..f89152ca52a20 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1041,6 +1041,7 @@ struct intel_crtc_state {
bool has_psr2;
bool enable_psr2_sel_fetch;
u32 dc3co_exitline;
+ u16 su_y_granularity;
/*
* Frequence the dpll for the port should run at. Differs from the
@@ -1498,7 +1499,8 @@ struct intel_psr {
ktime_t last_exit;
bool sink_not_reliable;
bool irq_aux_error;
- u16 su_x_granularity;
+ u16 su_w_granularity;
+ u16 su_y_granularity;
u32 dc3co_exitline;
u32 dc3co_exit_delay;
struct delayed_work dc3co_work;
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 77865cf6641f8..fde30f937504e 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -265,32 +265,44 @@ static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp)
return val;
}
-static u16 intel_dp_get_su_x_granulartiy(struct intel_dp *intel_dp)
+static void intel_dp_get_su_granularity(struct intel_dp *intel_dp)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
- u16 val;
ssize_t r;
+ u16 w;
+ u8 y;
+
+ /* If sink don't have specific granularity requirements set legacy ones */
+ if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED)) {
+ /* As PSR2 HW sends full lines, we do not care about x granularity */
+ w = 4;
+ y = 4;
+ goto exit;
+ }
- /*
- * Returning the default X granularity if granularity not required or
- * if DPCD read fails
- */
- if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED))
- return 4;
-
- r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &val, 2);
+ r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &w, 2);
if (r != 2)
drm_dbg_kms(&i915->drm,
"Unable to read DP_PSR2_SU_X_GRANULARITY\n");
-
/*
* Spec says that if the value read is 0 the default granularity should
* be used instead.
*/
- if (r != 2 || val == 0)
- val = 4;
+ if (r != 2 || w == 0)
+ w = 4;
- return val;
+ r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_Y_GRANULARITY, &y, 1);
+ if (r != 1) {
+ drm_dbg_kms(&i915->drm,
+ "Unable to read DP_PSR2_SU_Y_GRANULARITY\n");
+ y = 4;
+ }
+ if (y == 0)
+ y = 1;
+
+exit:
+ intel_dp->psr.su_w_granularity = w;
+ intel_dp->psr.su_y_granularity = y;
}
void intel_psr_init_dpcd(struct intel_dp *intel_dp)
@@ -346,8 +358,7 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
if (intel_dp->psr.sink_psr2_support) {
intel_dp->psr.colorimetry_support =
intel_dp_get_colorimetry_status(intel_dp);
- intel_dp->psr.su_x_granularity =
- intel_dp_get_su_x_granulartiy(intel_dp);
+ intel_dp_get_su_granularity(intel_dp);
}
}
}
@@ -742,6 +753,40 @@ static bool intel_psr2_sel_fetch_config_valid(struct intel_dp *intel_dp,
return crtc_state->enable_psr2_sel_fetch = true;
}
+static bool psr2_granularity_check(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state)
+{
+ const int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay;
+ const int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay;
+ u16 y_granularity = 0;
+
+ /* PSR2 HW only send full lines so we only need to validate the width */
+ if (crtc_hdisplay % intel_dp->psr.su_w_granularity)
+ return false;
+
+ if (crtc_vdisplay % intel_dp->psr.su_y_granularity)
+ return false;
+
+ /* HW tracking is only aligned to 4 lines */
+ if (!crtc_state->enable_psr2_sel_fetch)
+ return intel_dp->psr.su_y_granularity == 4;
+
+ /*
+ * For SW tracking we can adjust the y to match sink requirement if
+ * multiple of 4
+ */
+ if (intel_dp->psr.su_y_granularity <= 2)
+ y_granularity = 4;
+ else if ((intel_dp->psr.su_y_granularity % 4) == 0)
+ y_granularity = intel_dp->psr.su_y_granularity;
+
+ if (y_granularity == 0 || crtc_vdisplay % y_granularity)
+ return false;
+
+ crtc_state->su_y_granularity = y_granularity;
+ return true;
+}
+
static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
@@ -824,19 +869,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
return false;
}
- /*
- * HW sends SU blocks of size four scan lines, which means the starting
- * X coordinate and Y granularity requirements will always be met. We
- * only need to validate the SU block width is a multiple of
- * x granularity.
- */
- if (crtc_hdisplay % intel_dp->psr.su_x_granularity) {
- drm_dbg_kms(&dev_priv->drm,
- "PSR2 not enabled, hdisplay(%d) not multiple of %d\n",
- crtc_hdisplay, intel_dp->psr.su_x_granularity);
- return false;
- }
-
if (HAS_PSR2_SEL_FETCH(dev_priv)) {
if (!intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state) &&
!HAS_PSR_HW_TRACKING(dev_priv)) {
@@ -853,6 +885,11 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
return false;
}
+ if (!psr2_granularity_check(intel_dp, crtc_state)) {
+ drm_dbg_kms(&dev_priv->drm, "PSR2 not enabled, SU granularity not compatible\n");
+ return false;
+ }
+
if (!crtc_state->enable_psr2_sel_fetch &&
(crtc_hdisplay > psr_max_h || crtc_vdisplay > psr_max_v)) {
drm_dbg_kms(&dev_priv->drm,
@@ -1432,6 +1469,16 @@ static void clip_area_update(struct drm_rect *overlap_damage_area,
overlap_damage_area->y2 = damage_area->y2;
}
+static void intel_psr2_sel_fetch_pipe_alignment(const struct intel_crtc_state *crtc_state,
+ struct drm_rect *pipe_clip)
+{
+ const u16 y_alignment = crtc_state->su_y_granularity;
+
+ pipe_clip->y1 -= pipe_clip->y1 % y_alignment;
+ if (pipe_clip->y2 % y_alignment)
+ pipe_clip->y2 = ((pipe_clip->y2 / y_alignment) + 1) * y_alignment;
+}
+
int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
@@ -1540,10 +1587,7 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
if (full_update)
goto skip_sel_fetch_set_loop;
- /* It must be aligned to 4 lines */
- pipe_clip.y1 -= pipe_clip.y1 % 4;
- if (pipe_clip.y2 % 4)
- pipe_clip.y2 = ((pipe_clip.y2 / 4) + 1) * 4;
+ intel_psr2_sel_fetch_pipe_alignment(crtc_state, &pipe_clip);
/*
* Now that we have the pipe damaged area check if it intersect with
--
2.32.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
