When an encoder is shared on several connectors there is only
one hotplug line, thus this line needs to be shared among these
connectors.
If HPD detect only works reliably on a subset of those connectors,
we want to poll the others. Thus we need to make sure that storm
detection doesn't mess up the settings for those connectors.
Therefore we store the settings in the intel_connector struct and
restore them from there.
If nothing is set but the encoder has a hpd_pin set we assume this
connector is hotplug capable.
On init/reset we make sure the polled state of the connectors
is (re)set to the default value, the HPD interrupts are marked
enabled.
Signed-off-by: Egbert Eich <eich at suse.de>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 14 ++++++++++++++
drivers/gpu/drm/i915/intel_crt.c | 6 ++----
drivers/gpu/drm/i915/intel_dp.c | 1 -
drivers/gpu/drm/i915/intel_drv.h | 4 ++++
drivers/gpu/drm/i915/intel_hdmi.c | 1 -
drivers/gpu/drm/i915/intel_sdvo.c | 5 ++---
drivers/gpu/drm/i915/intel_tv.c | 2 +-
7 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 71fc238..bc00532 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -596,6 +596,7 @@ static inline void hotplug_irq_storm_detect(struct drm_device *dev,
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
for (i = 1; i < HPD_NUM_PINS; i++) {
+
if (!(hpd[i] & hotplug_trigger) ||
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
continue;
@@ -3048,7 +3049,20 @@ void intel_irq_init(struct drm_device *dev)
void intel_hpd_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ int i;
+ for (i = 1; i < HPD_NUM_PINS; i++) {
+ dev_priv->hpd_stats[i].hpd_cnt = 0;
+ dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
+ }
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ connector->polled = intel_connector->polled;
+ if (!connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ }
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1ae2d7f..c063b9f 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -793,10 +793,8 @@ void intel_crt_init(struct drm_device *dev)
drm_sysfs_connector_add(connector);
- if (I915_HAS_HOTPLUG(dev))
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- else
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ if (!I915_HAS_HOTPLUG(dev))
+ intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
/*
* Configure the automatic hotplug detection stuff
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 482b5e5..1e9b19a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2786,7 +2786,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
- connector->polled = DRM_CONNECTOR_POLL_HPD;
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d7bd031..a05fde7 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -171,6 +171,10 @@ struct intel_connector {
/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
struct edid *edid;
+
+ /* since POLL and HPD connectors may use the same HPD line keep the native
+ state of connector->polled in case hotplug storm detection changes it */
+ u8 polled;
};
struct intel_crtc_config {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index ee4a8da..8912201 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -998,7 +998,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
- connector->polled = DRM_CONNECTOR_POLL_HPD;
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 298dc85..64b8b40 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2276,7 +2276,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
connector = &intel_connector->base;
if (intel_sdvo_get_hotplug_support(intel_sdvo) &
intel_sdvo_connector->output_flag) {
- connector->polled = DRM_CONNECTOR_POLL_HPD;
intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag;
/* Some SDVO devices have one-shot hotplug interrupts.
* Ensure that they get re-enabled when an interrupt happens.
@@ -2284,7 +2283,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
intel_sdvo_enable_hotplug(intel_encoder);
} else {
- connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+ intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
}
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
@@ -2353,7 +2352,7 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 6673726..b945bc5 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1613,7 +1613,7 @@ intel_tv_init(struct drm_device *dev)
*
* More recent chipsets favour HDMI rather than integrated S-Video.
*/
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
DRM_MODE_CONNECTOR_SVIDEO);
--
1.8.1.4
