Yes, I also have the same.
I git bisected that and found this to be the cause, i started a new email thread because i couldn't find this email ^_^
Cheers,
Albert
El dilluns, 10 de maig de 2021, a les 10:07:33 (CEST), Emanuele Panigati va escriure:
> Hi,
> on my Dell XPS 15 9570 laptop I might have a regression with Arch Linux
> (kernel 5.12.2-arch1-1: during boot the laptop monitor goes black while
> external monitors still works...
>
>
> Panich
>
>
> Il giorno lun 11 gen 2021 alle ore 19:28 Ville Syrjälä <
> ville.syrjala@xxxxxxxxxxxxxxx> ha scritto:
>
> > On Thu, Jan 07, 2021 at 08:20:25PM +0200, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >
> > > Some new eDP panels don't like to operate at the max parameters, and
> > > instead we need to go for an optimal confiugration. That unfortunately
> > > doesn't work with older eDP panels which are generally only guaranteed
> > > to work at the max parameters.
> > >
> > > To solve these two conflicting requirements let's start with the optimal
> > > setup, and if that fails we start again with the max parameters. The
> > > downside is probably an extra modeset when we switch strategies but
> > > I don't see a good way to avoid that.
> > >
> > > For a bit of history we first tried to go for the fast+narrow in
> > > commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config
> > > fast and narrow"). but that had to be reverted due to regression
> > > on older panels in commit f11cb1c19ad0 ("drm/i915/dp: revert back
> > > to max link rate and lane count on eDP"). So now we try to get
> > > the best of both worlds by using both strategies.
> >
> > Pushed. Fingers crossed for no regressions...
> >
> > --
> > Ville Syrjälä
> > Intel
> >
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
