[PATCH] drm/i915: use lower aux clock divider on non-ULT HSW

[jani.nikula at intel.com (Jani Nikula)]

Workaround to avoid intermittent aux channel failures, per spec change.

Signed-off-by: Jani Nikula <jani.nikula at intel.com>

---

Untested.
---
 drivers/gpu/drm/i915/intel_dp.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 482b5e5..5fec183 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -344,7 +344,10 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	 * Note that PCH attached eDP panels should use a 125MHz input
 	 * clock divider.
 	 */
-	if (is_cpu_edp(intel_dp)) {
+	if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
+		/* Workaround for non-ULT HSW */
+		aux_clock_divider = 74;
+	} else if (is_cpu_edp(intel_dp)) {
 		if (HAS_DDI(dev))
 			aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
 		else if (IS_VALLEYVIEW(dev))
-- 
1.7.10.4