[PATCH 11/13] drm/i915: clean up plane bpp confusion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 28, 2013 at 12:46:42PM +0100, Daniel Vetter wrote:
> On Thu, Mar 28, 2013 at 01:26:28PM +0200, Ville Syrj?l? wrote:
> > On Wed, Mar 27, 2013 at 12:45:00AM +0100, Daniel Vetter wrote:
> > > - Update_plane should never see a wrong fb bpp value, BUG in the
> > >   corresponding cases.
> > 
> > That's not true actually. For sprites the common drm code already
> > checks the format against the list provided by the driver, but for
> > primary planes there's no such check. The check in
> > intel_framebuffer_init() isn't enough since it'll also accept
> > formats that are supported by sprites but not by the primary planes.
> 
> With the new pipe_config step we check plane bpp in the new compute config
> stage, so before we start touching the hw. Which means by the time we
> reach the various *_update_plane functions, we shouldn't see an
> unsupported pixel format any more.

Do you mean the fb->depth check in pipe_config_set_bpp()? That's not
enough. It doesn't have any gen checks, so it could very well let some
unsupported format through, even though the depth/bpp might match. Or
did I miss some more thorough check somewhere?

I've been pondering if I should just propose removing depth/bpp from
drm_framebuffer altogether to make it harder to write code that doesn't
do proper format checks...

> There's the shortpath in the setcrtc ioctl implementation which goes
> directly to set_base, but that one checks whether the bits_per_pixel of
> the fb matches. I guess we should switch that one over to
> fb->pixel_format, but besides that nit I think we really should be
> covered, and the below default cases are indeed BUGs.
> 
> Or have I missed a place somewhere?
> 
> I'll follow up with the pixel_format patch.

Perhaps some common func that you can call early in both set_base
and full modeset paths?

> 
> Cheers, Daniel
> > 
> > > 
> > > v2: Rebase on top of Ville's plane pixel layout changes.
> > > 
> > > v3: Actually drop the old gen4 check for 10bpc planes, spotted
> > > by Ville Syrj?l?.
> > > 
> > > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> > > ---
> > >  drivers/gpu/drm/i915/intel_display.c | 20 ++++++++------------
> > >  1 file changed, 8 insertions(+), 12 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > index 51557ba..bbf31aa 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -2096,8 +2096,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> > >  		dspcntr |= DISPPLANE_RGBX101010;
> > >  		break;
> > >  	default:
> > > -		DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
> > > -		return -EINVAL;
> > > +		BUG();
> > >  	}
> > >  
> > >  	if (INTEL_INFO(dev)->gen >= 4) {
> > > @@ -2190,8 +2189,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
> > >  		dspcntr |= DISPPLANE_RGBX101010;
> > >  		break;
> > >  	default:
> > > -		DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
> > > -		return -EINVAL;
> > > +		BUG();
> > >  	}
> > >  
> > >  	if (obj->tiling_mode != I915_TILING_NONE)
> > > @@ -7372,21 +7370,19 @@ pipe_config_set_bpp(struct drm_crtc *crtc,
> > >  		bpp = 8*3;
> > >  		break;
> > >  	case 30:
> > > +		if (INTEL_INFO(dev)->gen < 4) {
> > > +			DRM_DEBUG_KMS("10 bpc not supported on gen2/3\n");
> > > +			return -EINVAL;
> > > +		}
> > > +
> > >  		bpp = 10*3;
> > >  		break;
> > > -	case 48:
> > > -		bpp = 12*3;
> > > -		break;
> > > +	/* TODO: gen4+ supports 16 bpc floating point, too. */
> > >  	default:
> > >  		DRM_DEBUG_KMS("unsupported depth\n");
> > >  		return -EINVAL;
> > >  	}
> > >  
> > > -	if (fb->depth > 24 && !HAS_PCH_SPLIT(dev)) {
> > > -		DRM_DEBUG_KMS("high depth not supported on gmch platforms\n");
> > > -		return -EINVAL;
> > > -	}
> > > -
> > >  	pipe_config->pipe_bpp = bpp;
> > >  
> > >  	/* Clamp display bpp to EDID value */
> > > -- 
> > > 1.7.11.7
> > > 
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx at lists.freedesktop.org
> > > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > 
> > -- 
> > Ville Syrj?l?
> > Intel OTC
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

-- 
Ville Syrj?l?
Intel OTC


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux