On intel_ddi_init() we already check VBT if the port supports HDMI/DP
and bail out otherwise. Instad of checking if a single port is present
using VBT in intel_display.c, move the stronger check to
intel_ddi_init() and return early in case it's not supported. There
would be no way intel_bios_* would report support for hdmi/dp if the
port isn't present so this should cause no regressions for other
platforms.
Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 7 +++++++
drivers/gpu/drm/i915/display/intel_display.c | 14 ++++++--------
2 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 3b97c0091812..1235be0ba5d1 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3972,6 +3972,13 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
bool init_hdmi, init_dp;
enum phy phy = intel_port_to_phy(dev_priv, port);
+ if (!intel_bios_is_port_present(dev_priv, port)) {
+ drm_dbg_kms(&dev_priv->drm,
+ "VBT says port %c is not present, respect it\n",
+ port_name(port));
+ return;
+ }
+
/*
* On platforms with HTI (aka HDPORT), if it's enabled at boot it may
* have taken over some of the PHYs and made them unavailable to the
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 23ec68498800..7aaf7a29d493 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -11904,13 +11904,13 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
intel_ddi_init(dev_priv, PORT_C);
intel_ddi_init(dev_priv, PORT_D);
intel_ddi_init(dev_priv, PORT_E);
+
/*
- * On some ICL SKUs port F is not present. No strap bits for
- * this, so rely on VBT.
- * Work around broken VBTs on SKUs known to have no port F.
+ * On some ICL SKUs port F is not present, but broken VBTs mark
+ * the port as present. Only try to initialize port F for the
+ * SKUs that may actually have it.
*/
- if (IS_ICL_WITH_PORT_F(dev_priv) &&
- intel_bios_is_port_present(dev_priv, PORT_F))
+ if (IS_ICL_WITH_PORT_F(dev_priv))
intel_ddi_init(dev_priv, PORT_F);
icl_dsi_init(dev_priv);
@@ -11964,10 +11964,8 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
/*
* On SKL we don't have a way to detect DDI-E so we rely on VBT.
*/
- if (IS_GEN9_BC(dev_priv) &&
- intel_bios_is_port_present(dev_priv, PORT_E))
+ if (IS_GEN9_BC(dev_priv))
intel_ddi_init(dev_priv, PORT_E);
-
} else if (HAS_PCH_SPLIT(dev_priv)) {
int found;
--
2.29.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
