On Thu, Jan 07, 2021 at 08:20:25PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Some new eDP panels don't like to operate at the max parameters, and
> instead we need to go for an optimal confiugration. That unfortunately
> doesn't work with older eDP panels which are generally only guaranteed
> to work at the max parameters.
>
> To solve these two conflicting requirements let's start with the optimal
> setup, and if that fails we start again with the max parameters. The
> downside is probably an extra modeset when we switch strategies but
> I don't see a good way to avoid that.
>
> For a bit of history we first tried to go for the fast+narrow in
> commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config
> fast and narrow"). but that had to be reverted due to regression
> on older panels in commit f11cb1c19ad0 ("drm/i915/dp: revert back
> to max link rate and lane count on eDP"). So now we try to get
> the best of both worlds by using both strategies.
Pushed. Fingers crossed for no regressions...
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
