Hi,
I noticed that a Haswell desktop machine with eDP gets only the blank
screen on the latest Linus tree. It works fine with 3.8, so it's a
regression since 3.9-rc1. Actually, it's not a regression. It's
three regressions in a shot! (I had to do painful bisections three
times...)
c464b2a17c59adedbdc02cc54341d630354edc3
drm/i915: set TRANSCODER_EDP even earlier
d6dd9eb1d96d2b7345fe4664066c2b7ed86da898
drm/i915: dynamic Haswell display power well support
commit cf0a6584aa6d382f802f2c3cacac23ccbccde0cd
drm/i915: write backlight harder
The first commit affects no matter whether power well is on or off.
It brings the eDP output always blank.
The next one has to be reverted completely, too. The power well
doesn't seem working correctly after all.
At this point, you'll get a blank screen only after the boot until X
starts, at least.
The blank screen on fb after boot is due to the third commit, which is
actually my patch. The patch has been never tested on the machines
where the original fix was targeted, so this is a clearly a wrong
regression fix :-< Judging from increasing number of bug reports, we
should revert this one again and fix properly for the Dell laptop.
At least, many HP and Lenovo machines suffer from this commit. The
details are found at:
https://bugzilla.kernel.org/show_bug.cgi?id=47941
Instead of reverting, a patch like below fixes the issue, too, but I
guess this will break Dell machine again, if I understand correctly.
A good news is that now I have a machine for a while so that I can
test any patch for the third, broken backlight, problem.
thanks,
Takashi
---
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index a3730e0..99ef9a3 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -317,10 +317,13 @@ void intel_panel_enable_backlight(struct drm_device *dev,
enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int prev_level;
if (dev_priv->backlight_level == 0)
dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+ prev_level = intel_panel_get_backlight(dev);
+
dev_priv->backlight_enabled = true;
intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
@@ -363,7 +366,7 @@ set_level:
* On some machines, BLC_PWM_CPU_CTL is cleared to zero automatically
* when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 are written.
*/
- if (!intel_panel_get_backlight(dev))
+ if (!prev_level && dev_priv->backlight_level)
intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
}
