To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.
Signed-off-by: Egbert Eich <eich at suse.de>
---
drivers/gpu/drm/i915/i915_drv.h | 13 +++++++++++++
drivers/gpu/drm/i915/intel_crt.c | 2 ++
drivers/gpu/drm/i915/intel_dp.c | 4 ++++
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 4 ++++
drivers/gpu/drm/i915/intel_sdvo.c | 3 +++
6 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e95337c..316747a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -86,6 +86,19 @@ enum port {
};
#define port_name(p) ((p) + 'A')
+enum hpd_pin {
+ HPD_NONE = 0,
+ HPD_PORT_A = HPD_NONE, /* PORT_A is internal */
+ HPD_TV = HPD_NONE, /* TV is known to be unreliable */
+ HPD_CRT,
+ HPD_SDVO_B,
+ HPD_SDVO_C,
+ HPD_PORT_B,
+ HPD_PORT_C,
+ HPD_PORT_D,
+ HPD_NUM_PINS
+};
+
#define I915_GEM_GPU_DOMAINS \
(I915_GEM_DOMAIN_RENDER | \
I915_GEM_DOMAIN_SAMPLER | \
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index cfc9687..de43cab 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -777,6 +777,8 @@ void intel_crt_init(struct drm_device *dev)
crt->base.disable = intel_disable_crt;
crt->base.enable = intel_enable_crt;
+ if (I915_HAS_HOTPLUG(dev))
+ crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev))
crt->base.get_hw_state = intel_ddi_get_hw_state;
else
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7b8bfe8..549933a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2835,18 +2835,22 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
/* Set up the DDC bus. */
switch (port) {
case PORT_A:
+ intel_encoder->hpd_pin = HPD_PORT_A;
name = "DPDDC-A";
break;
case PORT_B:
dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_B;
name = "DPDDC-B";
break;
case PORT_C:
dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_C;
name = "DPDDC-C";
break;
case PORT_D:
dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
+ intel_encoder->hpd_pin = HPD_PORT_D;
name = "DPDDC-D";
break;
default:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 005a91f..c9003bd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -168,6 +168,7 @@ struct intel_encoder {
* it is connected to in the pipe parameter. */
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
int crtc_mask;
+ enum hpd_pin hpd_pin;
};
struct intel_panel {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 5a6138c..8cd6bc1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1022,17 +1022,21 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
switch (port) {
case PORT_B:
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
+ intel_encoder->hpd_pin = HPD_PORT_B;
dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
break;
case PORT_C:
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
+ intel_encoder->hpd_pin = HPD_PORT_C;
dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
break;
case PORT_D:
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
+ intel_encoder->hpd_pin = HPD_PORT_D;
dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
break;
case PORT_A:
+ intel_encoder->hpd_pin = HPD_PORT_A;
/* Internal port only for eDP. */
default:
BUG();
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f01063a..cf57705 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2780,6 +2780,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
}
+ if (intel_sdvo->hotplug_active)
+ intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
+
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
intel_encoder->disable = intel_disable_sdvo;
--
1.7.7
