[PATCH 3/8] drm/i915: split up fdi_set_m_n into computation and hw setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



And also move the computed m_n values into the pipe_config. This is a
prep step to move the fdi state computation completely into the
prepare phase of the modeset sequence. Which will allow us to handle
fdi link bw constraints in a better way.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++-----------
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 2 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c75d429..caecec1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5216,13 +5216,11 @@ void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
 	}
 }
 
-static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
+static void ironlake_fdi_compute_config(struct intel_crtc *intel_crtc)
 {
-	struct drm_device *dev = crtc->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = intel_crtc->base.dev;
 	struct drm_display_mode *adjusted_mode =
 		&intel_crtc->config.adjusted_mode;
-	struct intel_link_m_n m_n = {0};
 	int target_clock, lane, link_bw;
 
 	/* FDI is a binary signal running at ~2.7GHz, encoding
@@ -5247,9 +5245,7 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
 	if (intel_crtc->config.pixel_multiplier > 1)
 		link_bw *= intel_crtc->config.pixel_multiplier;
 	intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
-			       link_bw, &m_n);
-
-	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
+			       link_bw, &intel_crtc->config.fdi_m_n);
 }
 
 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
@@ -5460,8 +5456,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
 	intel_crtc->config.fdi_lanes = 0;
-	if (intel_crtc->config.has_pch_encoder)
-		ironlake_fdi_set_m_n(crtc);
+	if (intel_crtc->config.has_pch_encoder) {
+		ironlake_fdi_compute_config(intel_crtc);
+
+		intel_cpu_transcoder_set_m_n(intel_crtc,
+					     &intel_crtc->config.fdi_m_n);
+	}
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5588,8 +5588,12 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
-	if (intel_crtc->config.has_pch_encoder)
-		ironlake_fdi_set_m_n(crtc);
+	if (intel_crtc->config.has_pch_encoder) {
+		ironlake_fdi_compute_config(intel_crtc);
+
+		intel_cpu_transcoder_set_m_n(intel_crtc,
+					     &intel_crtc->config.fdi_m_n);
+	}
 
 	haswell_set_pipeconf(crtc);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9d01482..7677fa8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -223,8 +223,9 @@ struct intel_crtc_config {
 	/* Used by SDVO (and if we ever fix it, HDMI). */
 	unsigned pixel_multiplier;
 
-	/* FDI lanes used, only valid if has_pch_encoder is set. */
+	/* FDI configuration, only valid if has_pch_encoder is set. */
 	int fdi_lanes;
+	struct intel_link_m_n fdi_m_n;
 };
 
 struct intel_crtc {
-- 
1.7.11.4



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux