From: Paulo Zanoni <paulo.r.zanoni at intel.com> If bit 0 of the features byte (0x18) is set to 0, then, according to the EDID spec, "the display is non-continuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in Base EDID and certain Extension Blocks". For more information, please see the EDID spec, check the notes of the table that explains the "Feature Support" byte (18h) and also the notes on the tables of the section that explains "Display Range Limits & Additional Timing Description Definition (tag #FDh)". Cc: Adam Jackson <ajax at redhat.com> Cc: stable at vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729 Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com> --- drivers/gpu/drm/drm_edid.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) I still need to ask some specific people to test the patch, but I believe it is correct. diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a3a3b61..6a003b6 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2053,7 +2053,8 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) num_modes += add_cvt_modes(connector, edid); num_modes += add_standard_modes(connector, edid); num_modes += add_established_modes(connector, edid); - num_modes += add_inferred_modes(connector, edid); + if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF) + num_modes += add_inferred_modes(connector, edid); num_modes += add_cea_modes(connector, edid); if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75)) -- 1.7.10.4
