If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage. Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.
v2:
- Fix minor checkpatch warnings
v3:
- Just readout HDPORT_STATE register once during init and then parse it
later as needed.
- Add a 'has_hti' device info flag to track whether we should readout
HDPORT_STATE or not. We can skip the platform/flag tests later since
the hti_state in dev_priv will remain 0 for platforms it does not
apply to.
- Move PLL masking into icl_get_combo_phy_dpll() since at the moment
RKL is the only platform that has HTI. (Jose)
Bspec: 49189
Bspec: 53707
Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
Cc: José Roberto de Souza <jose.souza@xxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 19 +++++++++++++++++++
drivers/gpu/drm/i915/display/intel_display.c | 8 ++++++++
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 11 +++++++++++
drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++
drivers/gpu/drm/i915/i915_pci.c | 1 +
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_device_info.h | 1 +
7 files changed, 54 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 1ca70f9abc8d..714b2bc96f23 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4923,6 +4923,13 @@ intel_ddi_max_lanes(struct intel_digital_port *dig_port)
return max_lanes;
}
+static bool hti_uses_phy(struct drm_i915_private *i915, enum phy phy)
+{
+ return i915->hti_state & HDPORT_ENABLED &&
+ (i915->hti_state & HDPORT_PHY_USED_DP(phy) ||
+ i915->hti_state & HDPORT_PHY_USED_HDMI(phy));
+}
+
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
{
struct intel_digital_port *dig_port;
@@ -4930,6 +4937,18 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
bool init_hdmi, init_dp, init_lspcon = false;
enum phy phy = intel_port_to_phy(dev_priv, port);
+ /*
+ * On platforms with HTI (aka HDPORT), if it's enabled at boot it may
+ * have taken over some of the PHYs and made them unavailable to the
+ * driver. In that case we should skip initializing the corresponding
+ * outputs.
+ */
+ if (hti_uses_phy(dev_priv, phy)) {
+ drm_dbg_kms(&dev_priv->drm, "PORT %c / PHY %c reserved by HTI\n",
+ port_name(port), phy_name(phy));
+ return;
+ }
+
init_hdmi = intel_bios_port_supports_dvi(dev_priv, port) ||
intel_bios_port_supports_hdmi(dev_priv, port);
init_dp = intel_bios_port_supports_dp(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 6cb66580ad2c..db2a5a1a9b35 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -47,6 +47,7 @@
#include "display/intel_ddi.h"
#include "display/intel_dp.h"
#include "display/intel_dp_mst.h"
+#include "display/intel_dpll_mgr.h"
#include "display/intel_dsi.h"
#include "display/intel_dvo.h"
#include "display/intel_gmbus.h"
@@ -17903,6 +17904,13 @@ int intel_modeset_init(struct drm_i915_private *i915)
if (i915->max_cdclk_freq == 0)
intel_update_max_cdclk(i915);
+ /*
+ * If the platform has HTI, we need to find out whether it has reserved
+ * any display resources before we create our display outputs.
+ */
+ if (INTEL_INFO(i915)->display.has_hti)
+ i915->hti_state = intel_de_read(i915, HDPORT_STATE);
+
/* Just disable it once at startup */
intel_vga_disable(i915);
intel_setup_outputs(i915);
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 134c2ecf4c80..81ab975fe4f0 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3475,6 +3475,14 @@ static void icl_update_active_dpll(struct intel_atomic_state *state,
icl_set_active_port_dpll(crtc_state, port_dpll_id);
}
+static u32 intel_get_hti_plls(struct drm_i915_private *i915)
+{
+ if (!(i915->hti_state & HDPORT_ENABLED))
+ return 0;
+
+ return REG_FIELD_GET(HDPORT_DPLL_USED_MASK, i915->hti_state);
+}
+
static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
struct intel_crtc *crtc,
struct intel_encoder *encoder)
@@ -3518,6 +3526,9 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
dpll_mask = BIT(DPLL_ID_ICL_DPLL1) | BIT(DPLL_ID_ICL_DPLL0);
}
+ /* Eliminate DPLLs from consideration if reserved by HTI */
+ dpll_mask &= ~intel_get_hti_plls(dev_priv);
+
port_dpll->pll = intel_find_shared_dpll(state, crtc,
&port_dpll->hw_state,
dpll_mask);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e4f7f6518945..56dfc6d98caa 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1044,6 +1044,14 @@ struct drm_i915_private {
struct intel_l3_parity l3_parity;
+ /*
+ * HTI (aka HDPORT) state read during initial hw readout. Most
+ * platforms don't have HTI, so this will just stay 0. Those that do
+ * will use this later to figure out which PLLs and PHYs are unavailable
+ * for driver usage.
+ */
+ u32 hti_state;
+
/*
* edram size in MB.
* Cannot be determined by PCIID. You must always read a register.
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 2338f92ce490..366ddfc8df6b 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -890,6 +890,7 @@ static const struct intel_device_info rkl_info = {
.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) |
BIT(TRANSCODER_C),
.require_force_probe = 1,
+ .display.has_hti = 1,
.display.has_psr_hw_tracking = 0,
.platform_engine_mask =
BIT(RCS0) | BIT(BCS0) | BIT(VECS0) | BIT(VCS0),
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bfdb6d23b5d8..89a9f2d8110e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2921,6 +2921,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define MBUS_BBOX_CTL_S1 _MMIO(0x45040)
#define MBUS_BBOX_CTL_S2 _MMIO(0x45044)
+#define HDPORT_STATE _MMIO(0x45050)
+#define HDPORT_DPLL_USED_MASK REG_GENMASK(14, 12)
+#define HDPORT_PHY_USED_DP(phy) REG_BIT(2 * (phy) + 2)
+#define HDPORT_PHY_USED_HDMI(phy) REG_BIT(2 * (phy) + 1)
+#define HDPORT_ENABLED REG_BIT(0)
+
/* Make render/texture TLB fetches lower priorty than associated data
* fetches. This is not turned on by default
*/
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index fd2385457ab6..6a3d607218aa 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -146,6 +146,7 @@ enum intel_ppgtt_type {
func(has_gmch); \
func(has_hdcp); \
func(has_hotplug); \
+ func(has_hti); \
func(has_ipc); \
func(has_modular_fia); \
func(has_overlay); \
--
2.24.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
