Hi
2013/1/11 Rodrigo Vivi <rodrigo.vivi at gmail.com>:
> From: Shobhit Kumar <shobhit.kumar at intel.com>
>
> Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 49 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f0224f8..c35caf1 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1423,6 +1423,55 @@ static bool is_edp_psr(struct intel_dp *intel_dp)
> return (is_edp(intel_dp) && (intel_dp->psr_dpcd[0] & 0x1));
> }
>
> +static void intel_edp_psr_setup(struct intel_dp *intel_dp)
> +{
> + struct drm_device *dev = intel_dp_to_dev(intel_dp);
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + uint32_t aux_clock_divider;
> + int precharge = 0x3;
> + int msg_size = 5; /* Header(4) + Message(1) */
> +
> + /* No need to setup if already done as these setting are persistent
> + * until power states are entered */
> + if (intel_dp->psr_setup)
> + return;
> +
> + /* Setup AUX registers */
> + /* Write command on DPCD 0x0600 */
> + I915_WRITE(EDP_PSR_AUX_DATA1, 0x80060000);
> +
> + /* Set the state to normal operation D0 in DPCD 0x0600 */
> + I915_WRITE(EDP_PSR_AUX_DATA2, 0x01000000);
> +
> + if (is_cpu_edp(intel_dp)) {
> + if (!IS_HASWELL(dev) && (IS_GEN6(dev) || IS_GEN7(dev)))
> + aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
> + else
> + /* CDCLK divided by 2 */
> + aux_clock_divider = ((I915_READ(CDCLK_FREQ) & CDCLK_FREQ_MASK) + 1)/2;
> + } else if (HAS_PCH_SPLIT(dev))
> + aux_clock_divider = 63; /* IRL input clock fixed at 125Mhz */
> + else
> + aux_clock_divider = intel_hrawclk(dev) / 2;
> +
> + I915_WRITE(EDP_PSR_AUX_CTL,
> + DP_AUX_CH_CTL_TIME_OUT_400us |
> + (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
> + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
> + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
> +
> + /* Setup the debug register */
> + I915_WRITE(EDP_PSR_DEBUG_CTL, I915_READ(EDP_PSR_DEBUG_CTL) |
> + EDP_PSR_DEBUG_MASK_MEMUP |
> + EDP_PSR_DEBUG_MASK_HPD);
> +
> + /* This flag can be made to 0 from pm code so as to reinitialize the
> + * AUX register in case of power states, returning from which will not
> + * maintain the AUX register settings
> + */
> + intel_dp->psr_setup = 1;
> +}
> +
Looks like this function has a lot in common with intel_dp_aux_ch. Can
we try to reuse its code? Maybe we could patch intel_dp_aux_ch to
support using the SRD registers instead of the standard registers?
Also we should probably create "intel_dp_get_aux_clock_divider()".
> static void intel_enable_dp(struct intel_encoder *encoder)
> {
> struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
