From: Paulo Zanoni <paulo.r.zanoni at intel.com>
The set_m_n code was spread all over the mode_set function.
Version 2:
Don't set the DP M/N registers on ironlake_set_m_n. Daniel Vetter has
plans to add some encoder-specific callbacks. Also, on this version we
don't change the order we're writing the registers, making the code
change safer.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 131 ++++++++++++++++++++--------------
1 file changed, 79 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index eb8248b..ebffd99 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4705,6 +4705,82 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
return true;
}
+static void ironlake_set_m_n(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum pipe pipe = intel_crtc->pipe;
+ struct intel_encoder *intel_encoder, *edp_encoder = NULL;
+ struct fdi_m_n m_n = {0};
+ int target_clock, pixel_multiplier, lane, link_bw;
+ bool is_dp = false, is_cpu_edp = false;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ switch (intel_encoder->type) {
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ is_dp = true;
+ if (!intel_encoder_is_pch_edp(&intel_encoder->base))
+ is_cpu_edp = true;
+ edp_encoder = intel_encoder;
+ break;
+ }
+ }
+
+ /* FDI link */
+ pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ lane = 0;
+ /* CPU eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (is_cpu_edp) {
+ intel_edp_link_config(edp_encoder, &lane, &link_bw);
+ } else {
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+ }
+
+ /* [e]DP over FDI requires target mode clock instead of link clock. */
+ if (edp_encoder)
+ target_clock = intel_edp_target_clock(edp_encoder, mode);
+ else if (is_dp)
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+
+ if (!lane) {
+ /*
+ * Account for spread spectrum to avoid
+ * oversubscribing the link. Max center spread
+ * is 2.5%; use 5% for safety's sake.
+ */
+ u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
+ lane = bps / (link_bw * 8) + 1;
+ }
+
+ intel_crtc->fdi_lanes = lane;
+
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
+ ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
+ &m_n);
+
+ I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+ I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+ I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+ I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+}
+
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4721,11 +4797,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
u32 dpll, fp = 0, fp2 = 0;
bool ok, has_reduced_clock = false, is_sdvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
- struct intel_encoder *encoder, *edp_encoder = NULL;
- int ret;
- struct fdi_m_n m_n = {0};
+ struct intel_encoder *encoder;
u32 temp;
- int target_clock, pixel_multiplier, lane, link_bw, factor;
+ int ret, factor;
bool dither;
bool is_cpu_edp = false, is_pch_edp = false;
@@ -4755,7 +4829,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
is_pch_edp = true;
else
is_cpu_edp = true;
- edp_encoder = encoder;
break;
}
@@ -4772,54 +4845,11 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
/* Ensure that the cursor is valid for the new mode before changing... */
intel_crtc_update_cursor(crtc, true);
- /* FDI link */
- pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- lane = 0;
- /* CPU eDP doesn't require FDI link, so just set DP M/N
- according to current link config */
- if (is_cpu_edp) {
- intel_edp_link_config(edp_encoder, &lane, &link_bw);
- } else {
- /* FDI is a binary signal running at ~2.7GHz, encoding
- * each output octet as 10 bits. The actual frequency
- * is stored as a divider into a 100MHz clock, and the
- * mode pixel clock is stored in units of 1KHz.
- * Hence the bw of each lane in terms of the mode signal
- * is:
- */
- link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
- }
-
- /* [e]DP over FDI requires target mode clock instead of link clock. */
- if (edp_encoder)
- target_clock = intel_edp_target_clock(edp_encoder, mode);
- else if (is_dp)
- target_clock = mode->clock;
- else
- target_clock = adjusted_mode->clock;
-
/* determine panel color depth */
dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
if (is_lvds && dev_priv->lvds_dither)
dither = true;
- if (!lane) {
- /*
- * Account for spread spectrum to avoid
- * oversubscribing the link. Max center spread
- * is 2.5%; use 5% for safety's sake.
- */
- u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
- lane = bps / (link_bw * 8) + 1;
- }
-
- intel_crtc->fdi_lanes = lane;
-
- if (pixel_multiplier > 1)
- link_bw *= pixel_multiplier;
- ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
- &m_n);
-
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
@@ -5016,10 +5046,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(PIPESRC(pipe),
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
- I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
- I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
- I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
- I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+ ironlake_set_m_n(crtc, mode, adjusted_mode);
if (is_cpu_edp)
ironlake_set_pll_edp(crtc, adjusted_mode->clock);
--
1.7.10.4
