Re: [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 05 Jan 2020, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> From: Derek Basehore <dbasehore@xxxxxxxxxxxx>
>
> Not every platform needs quirk detection for panel orientation, so
> split the drm_connector_init_panel_orientation_property into two
> functions. One for platforms without the need for quirks, and the
> other for platforms that need quirks.
>
> Hans de Goede (changes in v2):
>
> Rename the function from drm_connector_init_panel_orientation_property
> to drm_connector_set_panel_orientation[_with_quirk] and pass in the
> panel-orientation to set.
>
> Beside the rename, also make the function set the passed in value
> only once, if the value was set before (to a value other then
> DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
>
> This change is preparation for allowing the user to override the
> panel-orientation for any connector from the kernel commandline.
> When the panel-orientation is overridden this way, then we must ignore
> the panel-orientation detection done by the driver.

Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>

for merging via drm-misc.

---

Side note, I'm a bit concerned about the gradual accumulation of ad hoc
ways to set various connector properties on the kernel
command-line... without actually making it a generic way to set any
arbitrary connector properties on the kernel command-line.

BR,
Jani.



>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_connector.c         | 74 ++++++++++++++++++-------
>  drivers/gpu/drm/i915/display/icl_dsi.c  |  5 +-
>  drivers/gpu/drm/i915/display/intel_dp.c |  9 ++-
>  drivers/gpu/drm/i915/display/vlv_dsi.c  |  5 +-
>  include/drm/drm_connector.h             |  9 ++-
>  5 files changed, 71 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2166000ed057..de5031c4aa49 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1139,7 +1139,8 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
>   *	coordinates, so if userspace rotates the picture to adjust for
>   *	the orientation it must also apply the same transformation to the
>   *	touchscreen input coordinates. This property is initialized by calling
> - *	drm_connector_init_panel_orientation_property().
> + *	drm_connector_set_panel_orientation() or
> + *	drm_connector_set_panel_orientation_with_quirk()
>   *
>   * scaling mode:
>   *	This property defines how a non-native mode is upscaled to the native
> @@ -2046,38 +2047,41 @@ void drm_connector_set_vrr_capable_property(
>  EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
>  
>  /**
> - * drm_connector_init_panel_orientation_property -
> - *	initialize the connecters panel_orientation property
> - * @connector: connector for which to init the panel-orientation property.
> - * @width: width in pixels of the panel, used for panel quirk detection
> - * @height: height in pixels of the panel, used for panel quirk detection
> + * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
> + * @connector: connector for which to set the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + *
> + * This function sets the connector's panel_orientation and attaches
> + * a "panel orientation" property to the connector.
>   *
> - * This function should only be called for built-in panels, after setting
> - * connector->display_info.panel_orientation first (if known).
> + * Calling this function on a connector where the panel_orientation has
> + * already been set is a no-op (e.g. the orientation has been overridden with
> + * a kernel commandline option).
>   *
> - * This function will check for platform specific (e.g. DMI based) quirks
> - * overriding display_info.panel_orientation first, then if panel_orientation
> - * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> - * "panel orientation" property to the connector.
> + * It is allowed to call this function with a panel_orientation of
> + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
>   *
>   * Returns:
>   * Zero on success, negative errno on failure.
>   */
> -int drm_connector_init_panel_orientation_property(
> -	struct drm_connector *connector, int width, int height)
> +int drm_connector_set_panel_orientation(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation)
>  {
>  	struct drm_device *dev = connector->dev;
>  	struct drm_display_info *info = &connector->display_info;
>  	struct drm_property *prop;
> -	int orientation_quirk;
>  
> -	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> -	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> -		info->panel_orientation = orientation_quirk;
> +	/* Already set? */
> +	if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return 0;
>  
> -	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +	/* Don't attach the property if the orientation is unknown */
> +	if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
>  		return 0;
>  
> +	info->panel_orientation = panel_orientation;
> +
>  	prop = dev->mode_config.panel_orientation_property;
>  	if (!prop) {
>  		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> @@ -2094,7 +2098,37 @@ int drm_connector_init_panel_orientation_property(
>  				   info->panel_orientation);
>  	return 0;
>  }
> -EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> +
> +/**
> + * drm_connector_set_panel_orientation_with_quirk -
> + *	set the connecter's panel_orientation after checking for quirks
> + * @connector: connector for which to init the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * Like drm_connector_set_panel_orientation(), but with a check for platform
> + * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_set_panel_orientation_with_quirk(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation,
> +	int width, int height)
> +{
> +	int orientation_quirk;
> +
> +	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> +	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		panel_orientation = orientation_quirk;
> +
> +	return drm_connector_set_panel_orientation(connector,
> +						   panel_orientation);
> +}
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>  
>  int drm_connector_set_obj_prop(struct drm_mode_object *obj,
>  				    struct drm_property *property,
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 325df29b0447..340a77eb62b0 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>  
>  	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>  
> -	connector->base.display_info.panel_orientation =
> -			intel_dsi_get_panel_orientation(connector);
> -	drm_connector_init_panel_orientation_property(&connector->base,
> +	drm_connector_set_panel_orientation_with_quirk(&connector->base,
> +				intel_dsi_get_panel_orientation(connector),
>  				connector->panel.fixed_mode->hdisplay,
>  				connector->panel.fixed_mode->vdisplay);
>  }
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index b05b2191b919..5237a5615915 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7350,9 +7350,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>  	intel_connector->panel.backlight.power = intel_edp_backlight_power;
>  	intel_panel_setup_backlight(connector, pipe);
>  
> -	if (fixed_mode)
> -		drm_connector_init_panel_orientation_property(
> -			connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
> +	if (fixed_mode) {
> +		/* We do not know the orientation, but their might be a quirk */
> +		drm_connector_set_panel_orientation_with_quirk(connector,
> +				DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
> +				fixed_mode->hdisplay, fixed_mode->vdisplay);
> +	}
>  
>  	return true;
>  
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index f35fd6609457..de5deced2548 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1622,10 +1622,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>  
>  		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>  
> -		connector->base.display_info.panel_orientation =
> -			vlv_dsi_get_panel_orientation(connector);
> -		drm_connector_init_panel_orientation_property(
> +		drm_connector_set_panel_orientation_with_quirk(
>  				&connector->base,
> +				vlv_dsi_get_panel_orientation(connector),
>  				connector->panel.fixed_mode->hdisplay,
>  				connector->panel.fixed_mode->vdisplay);
>  	}
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3b65badd1efd..43aa193395b5 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1552,8 +1552,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
>  					    uint64_t link_status);
>  void drm_connector_set_vrr_capable_property(
>  		struct drm_connector *connector, bool capable);
> -int drm_connector_init_panel_orientation_property(
> -	struct drm_connector *connector, int width, int height);
> +int drm_connector_set_panel_orientation(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation);
> +int drm_connector_set_panel_orientation_with_quirk(
> +	struct drm_connector *connector,
> +	enum drm_panel_orientation panel_orientation,
> +	int width, int height);
>  int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
>  					  int min, int max);

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux