Screen unusable for console until X starts (945GM)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Samstag 20 Oktober 2012, 13:57:37 schrieb Daniel Vetter:
> On Sat, Oct 20, 2012 at 8:30 AM, Rolf Eike Beer <eike-kernel at sf-tec.de> 
wrote:
> > I have an older Laptop with this card in it:
> > 
> > [    0.813208] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
> > [    0.813284] agpgart-intel 0000:00:00.0: detected gtt size: 262144K
> > total, 262144K mappable
> > [    0.814188] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> > [    0.814377] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
> > 0xc0000000
> > 
> > I observe the following strange behavior: if I start up the system (grub2,
> > openSUSE 12.1) I see the splash screen appearing shortly. In most cases it
> > will then disappear and the screen will become just black. This is not the
> > delay "X is loading but has not put anything on the screen", but it is
> > much
> > earlier. I'm asked for a crypt password during bootup, which in most cases
> > now happens totally in the dark, i.e. no console messages at all, no
> > prompt. Booting just to runlevel 3 leaves me with a black screen but a
> > functional system.
> > 
> > The strange thing is: sometimes (like 10%) things are just working, i.e. I
> > have console output. I've tested with 3.1.10 as well as 3.6.2 and both
> > have
> > the problem. I've run a number of 2.6 kernels before on this system, but I
> > do not recall when the problem occured or which is one that definitely
> > worked.
> > 
> > Starting X will always get the screen back into working state, i.e. the
> > system is normally usable after startup, but it is just annoying to see
> > nothing during startup.
> > 
> > Any hints, patches, whatever?
> 
> Please attach drm.debug=0xe to your kernel cmdline, boot 3.6 and
> attach complete dmesg (up to the point where X makes something appear
> on the screen).

Attached. Since I did not mention it earlier: from the moment on X is started 
consoles also work fine.

Eike
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.2-6-desktop (geeko at buildhost) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sat Oct 13 09:48:04 UTC 2012 (1c7cb70)
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f67ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f680000-0x000000007f6fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: TOSHIBA Satellite A110/HTW20, BIOS V1.10 05/21/2006
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f680 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f7670-0x000f767f] mapped at [c00f7670]
[    0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x371fdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x36ffffff] page 2M
[    0.000000]  [mem 0x37000000-0x371fdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x371fdfff @ [mem 0x011f5000-0x011fffff]
[    0.000000] RAMDISK: [mem 0x3741c000-0x37feffff]
[    0.000000] Allocated new RAMDISK: [mem 0x3662a000-0x371fd4ed]
[    0.000000] Move RAMDISK from [mem 0x3741c000-0x37fef4ed] to [mem 0x3662a000-0x371fd4ed]
[    0.000000] ACPI: RSDP 000f75e0 00014 (v00 TOSCPL)
[    0.000000] ACPI: RSDT 7f680aa2 00048 (v01 TOSCPL Capell00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7f687dee 00074 (v01 TOSCPL CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: DSDT 7f682181 05C6D (v01 TOSCPL CALISTGA 06040000 INTL 20050624)
[    0.000000] ACPI: FACS 7f688fc0 00040
[    0.000000] ACPI: APIC 7f687e62 00068 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 7f687eca 00038 (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 7f687f02 0003C (v01 INTEL  CALISTGA 06040000 LOHR 0000005A)
[    0.000000] ACPI: BOOT 7f687fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 7f687f70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 7f681b2e 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f68149c 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f680aea 004F6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi at vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f67ffff]
[    0.000000] node 0 pfn: [0 - 7f680]
[    0.000000] remap_alloc: node 0 [7e600000-7f600000) -> [f5600000-f6600000)
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7f67ffff]
[    0.000000]   NODE_DATA [mem 0x35600000-0x35601fff] (remapped)
[    0.000000] 1156MB HIGHMEM available.
[    0.000000] 881MB LOWMEM available.
[    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[    0.000000] Low memory ends at vaddr f71fe000
[    0.000000] High memory starts at vaddr f71fe000
[    0.000000]   mapped low ram: 0 - 371fe000
[    0.000000]   low ram: 0 - 371fe000
[    0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   10 
[    0.000000] Node: 0, start_pfn: 100, end_pfn: 7f680
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x371fdfff]
[    0.000000]   HighMem  [mem 0x371fe000-0x7f67ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7f67ffff]
[    0.000000] On node 0 totalpages: 521743
[    0.000000] free_area_init_node: node 0, pgdat f5600000, node_mem_map f5602200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   Normal zone: 219962 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2314 pages used for memmap
[    0.000000]   HighMem zone: 293752 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6603000 s32256 r0 d20992 u53248
[    0.000000] pcpu-alloc: s32256 r0 d20992 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517665
[    0.000000] Policy zone: HighMem
[    0.000000] Kernel command line: root=/dev/system/root32 resume=/dev/mapper/system-swap splash=silent nosplash vga=0x361 drm.debug=0xe
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4174720 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000371fe:0007f680)
[    0.000000] Memory: 2026376k/2087424k available (5277k kernel code, 44212k reserved, 3813k data, 504k init, 1167880k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
[    0.000000]       .init : 0xc0ae1000 - 0xc0b5f000   ( 504 kB)
[    0.000000]       .data : 0xc07275c0 - 0xc0ae0a40   (3813 kB)
[    0.000000]       .text : 0xc0200000 - 0xc07275c0   (5277 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f4c06000 soft=f4c08000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.014 MHz processor
[    0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.02 BogoMIPS (lpj=1596014)
[    0.001019] pid_max: default: 32768 minimum: 301
[    0.001065] Security Framework initialized
[    0.001090] AppArmor: AppArmor initialized
[    0.001164] Mount-cache hash table entries: 512
[    0.001496] Initializing cgroup subsys cpuacct
[    0.001505] Initializing cgroup subsys memory
[    0.001524] Initializing cgroup subsys devices
[    0.001532] Initializing cgroup subsys freezer
[    0.001540] Initializing cgroup subsys net_cls
[    0.001548] Initializing cgroup subsys blkio
[    0.001556] Initializing cgroup subsys perf_event
[    0.001565] Initializing cgroup subsys hugetlb
[    0.001611] Disabled fast string operations
[    0.001622] CPU: Physical Processor ID: 0
[    0.001629] CPU: Processor Core ID: 0
[    0.001637] mce: CPU supports 6 MCE banks
[    0.001652] CPU0: Thermal monitoring handled by SMI
[    0.001656] process: using mwait in idle threads
[    0.001672] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.001672] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[    0.001672] tlb_flushall_shift is 0x6
[    0.003377] ACPI: Core revision 20120711
[    0.003386] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.003509] ACPI: Forced DSDT copy: length 0x05C6D copied locally, original unmapped
[    0.011072] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.011554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.022036] smpboot: CPU0: Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
[    0.022996] Performance Events: Core events, core PMU driver.
[    0.022996] ... version:                1
[    0.022996] ... bit width:              40
[    0.022996] ... generic registers:      2
[    0.022996] ... value mask:             000000ffffffffff
[    0.022996] ... max period:             000000007fffffff
[    0.022996] ... fixed-purpose events:   0
[    0.022996] ... event mask:             0000000000000003
[    0.032898] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.036009] CPU 1 irqstacks, hard=f4cda000 soft=f4cdc000
[    0.036012] smpboot: Booting Node   0, Processors  #1 OK
[    0.001999] Initializing CPU#1
[    0.001999] Disabled fast string operations
[    0.001999] CPU1: Thermal monitoring handled by SMI
[    0.048091] Brought up 2 CPUs
[    0.048116] smpboot: Total of 2 processors activated (6384.05 BogoMIPS)
[    0.050057] devtmpfs: initialized
[    0.050360] PM: Registering ACPI NVS region [mem 0x7f680000-0x7f6fffff] (524288 bytes)
[    0.050360] RTC time: 14:11:03, date: 10/20/12
[    0.050360] NET: Registered protocol family 16
[    0.051347] ACPI: bus type pci registered
[    0.051457] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.051472] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.051481] PCI: Using MMCONFIG for extended config space
[    0.051489] PCI: Using configuration type 1 for base access
[    0.053057] bio: create slab <bio-0> at 0
[    0.053108] ACPI: Added _OSI(Module Device)
[    0.053108] ACPI: Added _OSI(Processor Device)
[    0.053108] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.053108] ACPI: Added _OSI(Processor Aggregator Device)
[    0.055997] ACPI: EC: Look up EC in DSDT
[    0.062029] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.063094] ACPI: SSDT 7f681241 001DE (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.063876] ACPI: Dynamic OEM Table Load:
[    0.063886] ACPI: SSDT   (null) 001DE (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.064124] ACPI: SSDT 7f680fe0 001DC (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.064880] ACPI: Dynamic OEM Table Load:
[    0.064889] ACPI: SSDT   (null) 001DC (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.065393] ACPI: SSDT 7f68141f 0007D (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.066146] ACPI: Dynamic OEM Table Load:
[    0.066155] ACPI: SSDT   (null) 0007D (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.066357] ACPI: SSDT 7f6811bc 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.067107] ACPI: Dynamic OEM Table Load:
[    0.067117] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.067853] ACPI: Interpreter enabled
[    0.067868] ACPI: (supports S0 S3 S4 S5)
[    0.067906] ACPI: Using IOAPIC for interrupt routing
[    0.069179] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.116564] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.116910] ACPI: No dock devices found.
[    0.116922] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.117611] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.118896] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.118900] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.118904] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.118908] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.118912] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.118916] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.118920] PCI: root bus 00: using default resources
[    0.118977] PCI host bridge to bus 0000:00
[    0.118988] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[    0.118992] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.119002] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.119012] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.119035] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.119098] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.119114] pci 0000:00:02.0: reg 10: [mem 0xdc100000-0xdc17ffff]
[    0.119123] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.119132] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.119141] pci 0000:00:02.0: reg 1c: [mem 0xdc200000-0xdc23ffff]
[    0.119197] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.119210] pci 0000:00:02.1: reg 10: [mem 0xdc180000-0xdc1fffff]
[    0.119333] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.119359] pci 0000:00:1b.0: reg 10: [mem 0xdc440000-0xdc443fff 64bit]
[    0.119474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.119512] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.119633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.119673] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.119793] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.119834] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.119955] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.120007] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.120070] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.120119] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.120181] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.120229] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.120290] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.120340] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.120401] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.120462] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.120489] pci 0000:00:1d.7: reg 10: [mem 0xdc444000-0xdc4443ff]
[    0.120606] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.120638] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.120744] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.120867] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.120885] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.120900] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f)
[    0.120985] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[    0.121010] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.121024] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.121038] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.121052] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.121066] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
[    0.121129] pci 0000:00:1f.2: PME# supported from D3hot
[    0.121153] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.121232] pci 0000:00:1f.3: reg 20: [io  0x18c0-0x18df]
[    0.121350] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[    0.121356] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.121368] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.121375] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd7ffffff]
[    0.121385] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.121452] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[    0.121525] pci 0000:04:00.0: [8086:4222] type 00 class 0x028000
[    0.121585] pci 0000:04:00.0: reg 10: [mem 0xd8000000-0xd8000fff]
[    0.122018] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.122103] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.122156] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.122168] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.122175] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.122184] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.122253] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
[    0.122293] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[    0.122320] pci 0000:05:00.0: reg 10: [io  0x4000-0x40ff]
[    0.122366] pci 0000:05:00.0: reg 18: [mem 0xda000000-0xda000fff 64bit]
[    0.122419] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.122537] pci 0000:05:00.0: supports D1 D2
[    0.122541] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.122579] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.122605] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.122617] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.122624] pci 0000:00:1c.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.122634] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.122673] pci_bus 0000:06: busn_res: [bus 06-07] is inserted under [bus 00-ff]
[    0.122693] pci 0000:06:00.0: [1106:3044] type 00 class 0x0c0010
[    0.122723] pci 0000:06:00.0: reg 10: [mem 0xdc001000-0xdc0017ff]
[    0.122740] pci 0000:06:00.0: reg 14: [io  0x5000-0x507f]
[    0.122853] pci 0000:06:00.0: supports D2
[    0.122856] pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
[    0.122894] pci 0000:06:04.0: [1524:1412] type 02 class 0x060700
[    0.122923] pci 0000:06:04.0: reg 10: [mem 0xdc000000-0xdc000fff]
[    0.122970] pci 0000:06:04.0: supports D1 D2
[    0.122974] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.123015] pci 0000:06:04.1: [1524:0530] type 00 class 0x050100
[    0.123044] pci 0000:06:04.1: reg 10: [mem 0xdc001800-0xdc00187f]
[    0.123171] pci 0000:06:04.1: supports D1 D2
[    0.123174] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[    0.123206] pci 0000:06:04.2: [1524:0550] type 00 class 0x080501
[    0.123234] pci 0000:06:04.2: reg 10: [mem 0xdc001c00-0xdc001cff]
[    0.123360] pci 0000:06:04.2: supports D1 D2
[    0.123364] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.123396] pci 0000:06:04.3: [1524:0520] type 00 class 0x050100
[    0.123425] pci 0000:06:04.3: reg 10: [mem 0xdc002000-0xdc00207f]
[    0.123552] pci 0000:06:04.3: supports D1 D2
[    0.123555] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[    0.123587] pci 0000:06:04.4: [1524:0551] type 00 class 0x050100
[    0.123616] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff]
[    0.123741] pci 0000:06:04.4: supports D1 D2
[    0.123744] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[    0.123817] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.123831] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.123838] pci 0000:00:1e.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.123848] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.123852] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.123905] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.123913] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[    0.123918] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.123925] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.123970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.124277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.124380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.124483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.124622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.124741]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.124755]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.134710] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.134824] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.134938] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.135060] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.135172] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.135287] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.135402] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.135515] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.135614] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.135614] vgaarb: loaded
[    0.135614] vgaarb: bridge control possible 0000:00:02.0
[    0.135614] SCSI subsystem initialized
[    0.135614] ACPI: bus type scsi registered
[    0.136007] libata version 3.00 loaded.
[    0.136048] ACPI: bus type usb registered
[    0.136091] usbcore: registered new interface driver usbfs
[    0.136124] usbcore: registered new interface driver hub
[    0.136138] usbcore: registered new device driver usb
[    0.136138] PCI: Using ACPI for IRQ routing
[    0.147804] PCI: pci_cache_line_size set to 64 bytes
[    0.147959] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.147963] e820: reserve RAM buffer [mem 0x7f680000-0x7fffffff]
[    0.148127] NetLabel: Initializing
[    0.148134] NetLabel:  domain hash size = 128
[    0.148141] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.148163] NetLabel:  unlabeled traffic allowed by default
[    0.148244] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.148258] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.148272] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.155005] Switching to clocksource hpet
[    0.160319] AppArmor: AppArmor Filesystem Enabled
[    0.160374] pnp: PnP ACPI init
[    0.160403] ACPI: bus type pnp registered
[    0.161138] pnp 00:00: [bus 00-ff]
[    0.161143] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.161147] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.161151] pnp 00:00: [io  0x0d00-0xffff window]
[    0.161155] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.161159] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.161162] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.161166] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.161170] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.161173] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.161177] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.161181] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.161184] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.161188] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.161194] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.161198] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.161202] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.161205] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.161209] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.161213] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.161314] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.161364] pnp 00:01: [io  0xfe00-0xfe7f]
[    0.161368] pnp 00:01: [io  0xfe80-0xfeff]
[    0.161372] pnp 00:01: [io  0xff00-0xff7f]
[    0.161375] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.161379] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.161382] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.161386] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.161390] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.161393] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.161397] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.161400] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.161493] system 00:01: [io  0xfe00-0xfe7f] has been reserved
[    0.161505] system 00:01: [io  0xfe80-0xfeff] has been reserved
[    0.161515] system 00:01: [io  0xff00-0xff7f] has been reserved
[    0.161527] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.161538] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.161550] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.161561] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.161572] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.161584] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.161595] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.161606] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.161619] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.162112] pnp 00:02: [io  0x0000-0x001f]
[    0.162117] pnp 00:02: [io  0x0081-0x0091]
[    0.162120] pnp 00:02: [io  0x0093-0x009f]
[    0.162123] pnp 00:02: [io  0x00c0-0x00df]
[    0.162127] pnp 00:02: [dma 4]
[    0.162194] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.162213] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.162276] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.162414] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.162511] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.162524] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.162548] pnp 00:05: [io  0x00f0]
[    0.162564] pnp 00:05: [irq 13]
[    0.162633] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.162656] pnp 00:06: [io  0x002e-0x002f]
[    0.162659] pnp 00:06: [io  0x0061]
[    0.162662] pnp 00:06: [io  0x0063]
[    0.162666] pnp 00:06: [io  0x0065]
[    0.162669] pnp 00:06: [io  0x0067]
[    0.162672] pnp 00:06: [io  0x0070]
[    0.162676] pnp 00:06: [io  0x0080]
[    0.162679] pnp 00:06: [io  0x0092]
[    0.162682] pnp 00:06: [io  0x00b2-0x00b3]
[    0.162686] pnp 00:06: [io  0x0800-0x080f]
[    0.162689] pnp 00:06: [io  0x1000-0x107f]
[    0.162693] pnp 00:06: [io  0x1180-0x11bf]
[    0.162801] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.162812] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.162823] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.162834] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.162854] pnp 00:07: [io  0x0070-0x0077]
[    0.162862] pnp 00:07: [irq 8]
[    0.162929] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.183057] pnp 00:08: [io  0x0060]
[    0.183066] pnp 00:08: [io  0x0064]
[    0.183075] pnp 00:08: [irq 1]
[    0.183149] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.183172] pnp 00:09: [irq 12]
[    0.183243] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.183308] pnp: PnP ACPI: found 10 devices
[    0.183316] ACPI: ACPI bus type pnp unregistered
[    0.221944] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.221951] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-07] add_size 4000000
[    0.221960] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.221968] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.221982] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.221993] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.222019] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xd7ffffff]
[    0.222033] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.222052] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.222062] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.222077] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.222090] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.222111] pci 0000:05:00.0: BAR 6: assigned [mem 0xd4000000-0xd400ffff pref]
[    0.222124] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.222134] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.222148] pci 0000:00:1c.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.222162] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.222185] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.222189] pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.222193] pci 0000:06:04.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.222197] pci 0000:06:04.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.222202] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.222216] pci 0000:06:04.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[    0.222227] pci 0000:06:04.0: BAR 13: assigned [io  0x5400-0x54ff]
[    0.222238] pci 0000:06:04.0: BAR 14: assigned [io  0x5800-0x58ff]
[    0.222249] pci 0000:06:04.4: BAR 0: assigned [mem 0xdc001900-0xdc0019ff]
[    0.222265] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[    0.222274] pci 0000:06:04.0:   bridge window [io  0x5400-0x54ff]
[    0.222288] pci 0000:06:04.0:   bridge window [io  0x5800-0x58ff]
[    0.222302] pci 0000:06:04.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.222317] pci 0000:06:04.0:   bridge window [mem 0x84000000-0x87ffffff]
[    0.222332] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.222342] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.222356] pci 0000:00:1e.0:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.222370] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.222431] pci 0000:00:1e.0: setting latency timer to 64
[    0.222446] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.222450] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.222454] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.222457] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd7ffffff]
[    0.222461] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.222465] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.222469] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
[    0.222473] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd3ffffff 64bit pref]
[    0.222476] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.222480] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdbffffff]
[    0.222484] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd5ffffff 64bit pref]
[    0.222488] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.222491] pci_bus 0000:06: resource 1 [mem 0xdc000000-0xdc0fffff]
[    0.222495] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.222499] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.222502] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.222506] pci_bus 0000:07: resource 0 [io  0x5400-0x54ff]
[    0.222510] pci_bus 0000:07: resource 1 [io  0x5800-0x58ff]
[    0.222513] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.222517] pci_bus 0000:07: resource 3 [mem 0x84000000-0x87ffffff]
[    0.222590] NET: Registered protocol family 2
[    0.222860] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.223664] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.224082] TCP: Hash tables configured (established 131072 bind 65536)
[    0.224125] TCP: reno registered
[    0.224135] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.224155] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.224287] NET: Registered protocol family 1
[    0.224320] pci 0000:00:02.0: Boot video device
[    0.224546] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.224633] Unpacking initramfs...
[    0.596413] Freeing initrd memory: 12112k freed
[    0.605104] Simple Boot Flag at 0x36 set to 0x1
[    0.605765] audit: initializing netlink socket (disabled)
[    0.605793] type=2000 audit(1350742263.604:1): initialized
[    0.632536] bounce pool size: 64 pages
[    0.632563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.633297] VFS: Disk quotas dquot_6.5.2
[    0.633342] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.633664] msgmni has been set to 1700
[    0.634054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.634111] io scheduler noop registered
[    0.634122] io scheduler deadline registered
[    0.634146] io scheduler cfq registered (default)
[    0.634378] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.634545] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.634701] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.634948] vesafb: mode is 1280x800x16, linelength=2560, pages=2
[    0.634958] vesafb: scrolling: redraw
[    0.634967] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.635361] vesafb: framebuffer at 0xc0000000, mapped to 0xf7a80000, using 4000k, total 7872k
[    0.635624] bootsplash 3.2.0-2010/03/31: looking for picture...
[    0.635626] bootsplash: silentjpeg size 96416 bytes
[    0.659189] bootsplash: ...found (1280x800, 37678 bytes, v3).
[    0.735270] Console: switching to colour frame buffer device 156x46
[    0.810585] fb0: VESA VGA frame buffer device
[    0.810635] intel_idle: does not run on family 6 model 14
[    0.810696] GHES: HEST is not enabled!
[    0.810838] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.812055] Non-volatile memory driver v1.3
[    0.812065] Linux agpgart interface v0.103
[    0.812245] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.812321] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.813226] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.813413] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.813715] libphy: Fixed MDIO Bus: probed
[    0.813724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.813788] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.813794] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.813810] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.817742] ehci_hcd 0000:00:1d.7: debug port 1
[    0.817758] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.817793] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
[    0.823025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.823068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.823079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.823090] usb usb1: Product: EHCI Host Controller
[    0.823098] usb usb1: Manufacturer: Linux 3.6.2-6-desktop ehci_hcd
[    0.823108] usb usb1: SerialNumber: 0000:00:1d.7
[    0.823409] hub 1-0:1.0: USB hub found
[    0.823530] hub 1-0:1.0: 8 ports detected
[    0.823780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.823924] uhci_hcd: USB Universal Host Controller Interface driver
[    0.824080] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.824085] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.824205] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.824349] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.824511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.824628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824743] usb usb2: Product: UHCI Host Controller
[    0.824855] usb usb2: Manufacturer: Linux 3.6.2-6-desktop uhci_hcd
[    0.824968] usb usb2: SerialNumber: 0000:00:1d.0
[    0.825250] hub 2-0:1.0: USB hub found
[    0.825367] hub 2-0:1.0: 2 ports detected
[    0.825594] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.825599] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.825716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.825873] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.826049] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.826164] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.826277] usb usb3: Product: UHCI Host Controller
[    0.826388] usb usb3: Manufacturer: Linux 3.6.2-6-desktop uhci_hcd
[    0.826499] usb usb3: SerialNumber: 0000:00:1d.1
[    0.826769] hub 3-0:1.0: USB hub found
[    0.826885] hub 3-0:1.0: 2 ports detected
[    0.827118] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.827123] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.827241] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.827399] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.827558] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.827672] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.827785] usb usb4: Product: UHCI Host Controller
[    0.827895] usb usb4: Manufacturer: Linux 3.6.2-6-desktop uhci_hcd
[    0.828020] usb usb4: SerialNumber: 0000:00:1d.2
[    0.828296] hub 4-0:1.0: USB hub found
[    0.828411] hub 4-0:1.0: 2 ports detected
[    0.828629] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.828634] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.828750] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.828906] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.829073] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.829186] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.829297] usb usb5: Product: UHCI Host Controller
[    0.829405] usb usb5: Manufacturer: Linux 3.6.2-6-desktop uhci_hcd
[    0.829514] usb usb5: SerialNumber: 0000:00:1d.3
[    0.829778] hub 5-0:1.0: USB hub found
[    0.829892] hub 5-0:1.0: 2 ports detected
[    0.830193] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.830657] i8042: Detected active multiplexing controller, rev 1.1
[    0.830865] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.831038] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.831182] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.831327] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.831470] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.831727] mousedev: PS/2 mouse device common for all mice
[    0.832026] rtc_cmos 00:07: RTC can wake from S4
[    0.832341] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.832487] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.832607] cpuidle: using governor ladder
[    0.832716] cpuidle: using governor menu
[    0.833174] usbcore: registered new interface driver usbhid
[    0.833285] usbhid: USB HID core driver
[    0.833623] TCP: cubic registered
[    0.833780] NET: Registered protocol family 10
[    0.834186] lib80211: common routines for IEEE802.11 drivers
[    0.834298] lib80211_crypt: registered algorithm 'NULL'
[    0.834316] Key type dns_resolver registered
[    0.834422] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.834804] Using IPI No-Shortcut mode
[    0.835094] PM: Checking hibernation image partition /dev/mapper/system-swap
[    1.507237] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input1
[    1.523827] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input2
[    1.527056] PM: Hibernation image not present or could not be loaded.
[    1.527079] registered taskstats version 1
[    1.527987]   Magic number: 0:628:182
[    1.528212] rtc_cmos 00:07: setting system clock to 2012-10-20 14:11:05 UTC (1350742265)
[    1.528514] Freeing unused kernel memory: 504k freed
[    1.528923] Write protecting the kernel text: 5280k
[    1.529116] Write protecting the kernel read-only data: 3440k
[    1.529224] NX-protecting the kernel data: 4960k
[    1.581595] ata_piix 0000:00:1f.2: version 2.13
[    1.581620] ata_piix 0000:00:1f.2: MAP [
[    1.581739]  P0 P2 IDE IDE ]
[    1.608030] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.608144] Switching to clocksource tsc
[    1.732031] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.732452] scsi0 : ata_piix
[    1.733253] scsi1 : ata_piix
[    1.733908] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    1.734029] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    1.888488] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[    1.888603] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.894463] ata1.00: configured for UDMA/133
[    1.894742] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[    1.895122] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.895303] sd 0:0:0:0: [sda] Write Protect is off
[    1.895418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.895450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.904459] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HV02, max UDMA/33
[    1.910340] ata2.00: configured for UDMA/33
[    1.916104] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HV02 PQ: 0 ANSI: 5
[    1.895295] ACPI: Invalid Power Resource to register!
[    1.916580] ACPI: Invalid Power Resource to register!<6>[    1.920883]  sda: sda1 sda2 sda3
[    1.921380] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.926900] tsc: Marking TSC unstable due to TSC halts in idle
[    1.927065] ACPI: acpi_idle registered with cpuidle
[    1.927094] Switching to clocksource hpet
[    1.957492] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.969417] udevd[105]: starting version 173
[    1.989710] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.991338] acpi device:08: registered as cooling_device2
[    1.991504] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.991693] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
[    1.993323] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    1.995140] ACPI: Lid Switch [LID0]
[    1.998060] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    1.999075] ACPI: Power Button [PWRB]
[    1.999446] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    2.000074] ACPI: Power Button [PWRF]
[    2.005893] [drm] Initialized drm 1.1.0 20060810
[    2.051383] checking generic (c0000000 7b0000) vs hw (c0000000 10000000)
[    2.051389] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.051537] Console: switching to colour dummy device 80x25
[    2.052138] i915 0000:00:02.0: setting latency timer to 64
[    2.054874] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    2.054881] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    2.054905] [drm:i915_init_phys_hws], Enabled hardware status page
[    2.054909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.054921] [drm] Driver supports precise vblank timestamp query.
[    2.054928] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[    2.054959] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[    2.054963] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[    2.054970] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    2.054973] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 68940 1280 1296 1344 1408 800 801 804 816 0x8 0xa
[    2.054980] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300
[    2.054984] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[    2.054987] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    2.054993] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    2.055294] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    2.055322] [drm:intel_modeset_init], 2 display pipes available.
[    2.055330] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    2.092529] [drm:intel_modeset_init], plane 0 init failed: -19
[    2.092544] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    2.092548] [drm:intel_modeset_init], plane 1 init failed: -19
[    2.092552] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
[    2.092560] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.130127] [drm:intel_panel_get_backlight], get backlight PWM = 15625
[    2.130165] [drm:intel_panel_get_backlight], get backlight PWM = 15625
[    2.130282] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.382073] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
[    2.382081] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    2.382085] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
[    2.382093] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.382097] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.382101] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    2.382104] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    2.382107] [drm:i9xx_update_wm], memory self refresh disabled
[    2.382112] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
[    2.382115] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[    2.382119] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
[    2.382124] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.382128] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.382131] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    2.382134] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    2.382137] [drm:i9xx_update_wm], memory self refresh disabled
[    2.385578] [drm] initialized overlay support
[    2.385605] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.385617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.385633] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.385637] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.385643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[    2.397051] [drm:intel_crt_detect], CRT not detected via hotplug
[    2.399052] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    2.399061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.399068] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.399352] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.399358] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    2.399365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[    2.399373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[    2.399381] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[    2.399389] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    2.399417] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[    2.399421] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.399926] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[    2.399929] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    2.428221] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    2.428233] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.428237] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.428240] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    2.428243] [drm:intel_calculate_wm], FIFO watermark level: -5
[    2.428246] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    2.428250] [drm:i9xx_update_wm], self-refresh entries: 80
[    2.428252] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    2.428256] [drm:i9xx_update_wm], memory self refresh enabled
[    2.428262] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[    2.443301] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.443306] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.443309] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    2.443312] [drm:intel_calculate_wm], FIFO watermark level: -5
[    2.443314] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    2.443317] [drm:i9xx_update_wm], self-refresh entries: 80
[    2.443320] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    2.443324] [drm:i9xx_update_wm], memory self refresh enabled
[    2.497118] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    2.497128] [drm:intel_tv_detect_type], Unrecognised TV connection
[    2.515120] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[    2.515131] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.515148] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    2.558119] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.558124] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.558127] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    2.558130] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    2.558134] [drm:i9xx_update_wm], memory self refresh disabled
[    2.558294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[    2.558299] [drm:drm_setup_crtcs], 
[    2.558303] [drm:drm_enable_connectors], connector 5 enabled? yes
[    2.558306] [drm:drm_enable_connectors], connector 11 enabled? no
[    2.558309] [drm:drm_enable_connectors], connector 13 enabled? no
[    2.558312] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    2.558315] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    2.558318] [drm:drm_target_preferred], found mode 1280x800
[    2.558321] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    2.558325] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4
[    2.565353] [drm:intelfb_create], allocated 1280x800 fb: 0x00020000, bo f68128c0
[    2.565541] fbcon: inteldrmfb (fb0) is primary device
[    2.565653] [drm:drm_crtc_helper_set_config], 
[    2.565656] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    2.565660] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.565669] [drm:drm_crtc_helper_set_config], 
[    2.565672] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[    2.565682] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[    2.565684] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[    2.565688] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    2.565693] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.565695] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[    2.565697] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[    2.565700] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.565702] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[    2.565707] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.565712] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[    2.565714] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    2.565724] [drm:i9xx_get_refclk], using SSC reference clock of 96 MHz
[    2.566219] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[    2.566224] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.584122] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    2.584129] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.584133] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[    2.584136] [drm:intel_calculate_wm], FIFO watermark level: 4
[    2.584141] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.584145] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[    2.584149] [drm:i9xx_update_wm], self-refresh entries: 80
[    2.584154] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[    2.584158] [drm:i9xx_update_wm], memory self refresh enabled
[    2.584164] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1280x800]
[    2.584170] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.584173] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[    2.584177] [drm:intel_calculate_wm], FIFO watermark level: 4
[    2.584181] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.584185] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[    2.584189] [drm:i9xx_update_wm], self-refresh entries: 80
[    2.584194] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[    2.584197] [drm:i9xx_update_wm], memory self refresh enabled
[    2.600159] [drm:intel_lvds_enable], applying panel-fitter: 8, 0
[    2.828137] [drm:intel_panel_actually_set_backlight], set backlight PWM = 15625
[    2.828145] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[    2.828150] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
[    2.828167] [drm:drm_crtc_helper_set_config], 
[    2.828171] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    2.828176] [drm:drm_crtc_helper_set_config], 
[    2.828181] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[    2.828193] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.828198] [drm:drm_crtc_helper_set_config], 
[    2.828203] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[    2.828213] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.881059] [drm:drm_crtc_helper_set_config], 
[    2.881064] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[    2.881082] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.881225] Console: switching to colour frame buffer device 156x46
[    2.933733] [drm:drm_crtc_helper_set_config], 
[    2.933738] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[    2.933755] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.933947] fb0: inteldrmfb frame buffer device
[    2.933952] drm: registered panic notifier
[    2.933967] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.988762] md: linear personality registered for level -1
[    3.111598] device-mapper: uevent: version 1.0.3
[    3.111702] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel at redhat.com
[    4.456422] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    4.456431] PM: Basic memory bitmaps created
[    4.487495] PM: Basic memory bitmaps freed
[    4.487507] video LNXVIDEO:01: Restoring backlight state
[    4.547868] PM: Starting manual resume from disk
[    4.547886] PM: Hibernation image partition 253:8 present
[    4.547889] PM: Looking for hibernation image.
[    4.548117] PM: Image not found (code -22)
[    4.548127] PM: Hibernation image not present or could not be loaded.
[    4.617322] EXT4-fs (dm-2): mounting ext2 file system using the ext4 subsystem
[    4.620528] EXT4-fs (dm-2): mounted filesystem without journal. Opts: acl,user_xattr
[    4.721433] EXT4-fs (dm-2): re-mounted. Opts: acl,user_xattr
[    5.622230] kjournald starting.  Commit interval 5 seconds
[    5.628672] EXT3-fs (dm-5): using internal journal
[    5.628888] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[    6.983651] udevd[485]: starting version 173
[    8.139960] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    8.140345] ACPI: AC Adapter [ACAD] (off-line)
[    8.242815] intel_rng: FWH not detected
[    8.364604] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
[    8.538203] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff01]
[    8.538407] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[    8.538570] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[    8.538735] yenta_cardbus 0000:06:04.0: TI: mfunc 0x89501212, devctl 0x44
[    8.761868] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    8.762056] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[    8.762215] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[    8.762379] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[    8.762537] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xdc0fffff]
[    8.762693] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdc000000-0xdc0fffff:
[    8.762848]  excluding 0xdc000000-0xdc00ffff
[    8.763032] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[    8.763185] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[    8.763348]  excluding 0x80000000-0x83ffffff
[    8.804129] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
[    8.806948] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    9.238167] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.238777] r8169 0000:05:00.0: irq 43 for MSI/MSI-X
[    9.239296] r8169 0000:05:00.0: eth0: RTL8101e at 0xf7eb4000, 00:16:d4:20:d3:3a, XID 14000000 IRQ 43
[    9.246444] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[    9.246604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.246751] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[    9.246896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.247049] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.293712] leds_ss4200: no LED devices found
[    9.302545] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    9.335670] iTCO_vendor_support: vendor-support=0
[    9.442242] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.442538] ACPI: Battery Slot [BAT1] (battery present)
[    9.478372] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.478557] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[    9.478857] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.570201] cfg80211: Calling CRDA to update world regulatory domain
[   10.034516] sdhci: Secure Digital Host Controller Interface driver
[   10.034656] sdhci: Copyright(c) Pierre Ossman
[   10.192607] ACPI Warning: 0x000018c0-0x000018df SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[   10.192888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.253181] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[   10.669405] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[   10.669871] Registered led device: mmc0::
[   10.692064] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[   10.692358] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[   10.692515] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[   10.692729] Registered led device: mmc1::
[   10.715096] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[   10.754288] firewire_core 0000:06:00.0: created device fw0: GUID 00023f6599400d44, S400
[   10.841030] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   10.841278] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.841725] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   10.852931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.853155] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   10.991578] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   10.991829]  excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xdc000-0xfffff
[   10.992234] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   10.992506]  clean.
[   10.992835] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   10.993110]  excluding 0x60000000-0x60ffffff
[   11.499951] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.624953] ALSA hda_auto_parser.c:322 autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
[   11.624960] ALSA hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.624964] ALSA hda_auto_parser.c:330    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.624967] ALSA hda_auto_parser.c:331    mono: mono_out=0x0
[   11.624969] ALSA hda_auto_parser.c:335    inputs:
[   11.624973] ALSA hda_auto_parser.c:339      Mic=0xd
[   11.624976] ALSA hda_auto_parser.c:339      CD=0x11
[   11.625568] ALSA patch_realtek.c:1350 realtek: Enabling init ASM_ID=0x9205 CODEC_ID=10ec0861
[   11.625715] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   11.930566] cfg80211: World regulatory domain updated:
[   11.930812] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.931061] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.931289] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.931515] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.931742] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.931969] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.938995] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   11.939134] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   11.995848] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   11.995967] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   11.996246] iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X
[   11.996482] Registered led device: phy0-led
[   12.035124] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   12.074413] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.074705] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.972065] [drm:intel_crt_detect], CRT not detected via hotplug
[   12.974084] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   12.974098] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   12.974105] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   12.974390] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   12.974396] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   12.974404] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   12.974413] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   13.874239] Adding 2097148k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:2097148k 
[   15.642624] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   15.666303] kjournald starting.  Commit interval 5 seconds
[   15.666461] EXT3-fs (dm-0): warning: checktime reached, running e2fsck is recommended
[   15.666831] EXT3-fs (dm-0): using internal journal
[   15.667093] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[   15.684603] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[   15.688074] EXT4-fs (dm-1): warning: mounting unchecked fs, running e2fsck is recommended
[   15.691969] EXT4-fs (dm-1): mounted filesystem without journal. Opts: acl,user_xattr
[   15.719337] EXT4-fs (dm-4): mounting ext2 file system using the ext4 subsystem
[   15.721691] EXT4-fs (dm-4): warning: mounting unchecked fs, running e2fsck is recommended
[   15.726983] EXT4-fs (dm-4): mounted filesystem without journal. Opts: acl,user_xattr
[   15.753710] kjournald starting.  Commit interval 5 seconds
[   15.753787] EXT3-fs (dm-6): warning: checktime reached, running e2fsck is recommended
[   15.754245] EXT3-fs (dm-6): using internal journal
[   15.754477] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[   15.847993] fuse init (API version 7.20)
[   16.864248] [drm:drm_crtc_helper_set_config], 
[   16.864253] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   16.864271] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   17.639241] bootsplash: status on console 0 changed to on
[   23.020161] [drm:intel_crt_detect], CRT not detected via hotplug
[   23.022156] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   23.022171] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   23.022179] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   23.022465] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   23.022471] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   23.022480] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   23.022489] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   33.068162] [drm:intel_crt_detect], CRT not detected via hotplug
[   33.070181] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   33.070197] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   33.070204] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   33.070490] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   33.070496] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   33.070504] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   33.070513] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   43.115037] [drm:intel_crt_detect], CRT not detected via hotplug
[   43.117034] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   43.117038] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   43.117041] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   43.117318] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   43.117320] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   43.117325] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   43.117329] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   44.198323] bootsplash: status on console 0 changed to on
[   49.245580] bootsplash: status on console 6 changed to on
[   53.164062] [drm:intel_crt_detect], CRT not detected via hotplug
[   53.166071] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   53.166082] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   53.166088] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   53.166372] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   53.166379] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   53.166386] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   53.166395] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   56.402241] bootsplash: status on console 0 changed to on
[   57.885230] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[   57.954692] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   58.009020] r8169 0000:05:00.0: eth0: link down
[   58.009086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   58.296453] NET: Registered protocol family 17
[   59.454659] [drm:drm_crtc_helper_set_config], 
[   59.454662] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   59.454672] [drm:drm_crtc_helper_set_config], 
[   59.454675] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   59.454688] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   59.454691] [drm:drm_crtc_helper_set_config], 
[   59.454693] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   59.454698] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   59.509674] [drm:drm_crtc_helper_set_config], 
[   59.509679] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   59.509693] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   59.509830] [drm:drm_crtc_helper_set_config], 
[   59.509832] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   59.509838] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   59.514314] [drm:i915_driver_open], 
[   59.514402] [drm:drm_crtc_helper_set_config], 
[   59.514406] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   59.514415] [drm:drm_crtc_helper_set_config], 
[   59.514417] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   59.514430] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   59.514475] [drm:i915_driver_open], 
[   59.514878] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   59.514885] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   59.514955] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   59.514960] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   59.514976] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   59.514981] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[   59.514988] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   59.515203] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[   59.515208] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[   59.526043] [drm:intel_crt_detect], CRT not detected via hotplug
[   59.528054] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   59.528075] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.528082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   59.528369] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.528375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   59.528384] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[   59.528405] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[   59.528412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[   59.540066] [drm:intel_crt_detect], CRT not detected via hotplug
[   59.542059] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   59.542069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.542075] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   59.542357] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.542363] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   59.542370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[   59.542462] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   59.542466] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   59.542471] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   59.542476] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[   59.542495] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   59.543002] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   59.543005] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   59.572165] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[   59.572176] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.572180] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.572183] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.572187] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.572190] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.572193] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.572196] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.572199] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.572202] [drm:i9xx_update_wm], memory self refresh disabled
[   59.572208] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[   59.587250] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.587256] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.587258] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.587261] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.587265] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.587267] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.587270] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.587274] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.587277] [drm:i9xx_update_wm], memory self refresh disabled
[   59.641065] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[   59.641078] [drm:intel_tv_detect_type], Unrecognised TV connection
[   59.672167] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   59.672193] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   59.715168] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.715177] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.715181] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.715184] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.715187] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[   59.715191] [drm:i9xx_update_wm], self-refresh entries: 80
[   59.715193] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[   59.715197] [drm:i9xx_update_wm], memory self refresh enabled
[   59.715376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[   59.716490] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   59.716495] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   59.716500] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   59.716504] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[   59.716523] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   59.717030] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   59.717042] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   59.747349] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[   59.747362] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.747366] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.747369] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.747372] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.747375] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.747378] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.747381] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.747384] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.747388] [drm:i9xx_update_wm], memory self refresh disabled
[   59.747394] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[   59.757432] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.757436] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.757439] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.757442] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.757445] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.757448] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.757451] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.757454] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.757457] [drm:i9xx_update_wm], memory self refresh disabled
[   59.825162] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[   59.825175] [drm:intel_tv_detect_type], Unrecognised TV connection
[   59.841179] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   59.841203] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   59.884181] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.884189] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.884192] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.884195] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.884199] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[   59.884202] [drm:i9xx_update_wm], self-refresh entries: 80
[   59.884205] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[   59.884209] [drm:i9xx_update_wm], memory self refresh enabled
[   59.884399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[   59.885644] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   59.885649] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   59.885667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   59.885671] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[   59.885679] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   59.887185] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[   59.887190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[   59.899052] [drm:intel_crt_detect], CRT not detected via hotplug
[   59.901048] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   59.901055] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.901059] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   59.901334] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.901338] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   59.901342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[   59.901349] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[   59.901353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[   59.913122] [drm:intel_crt_detect], CRT not detected via hotplug
[   59.915074] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   59.915089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.915095] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   59.915381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   59.915387] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   59.915396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[   59.915530] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   59.915539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   59.915548] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   59.915557] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[   59.915593] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   59.916409] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   59.916416] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   59.946809] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[   59.946821] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.946825] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.946828] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.946831] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.946834] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.946837] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.946840] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.946843] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.946847] [drm:i9xx_update_wm], memory self refresh disabled
[   59.946852] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[   59.956890] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   59.956894] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   59.956897] [drm:intel_calculate_wm], FIFO watermark level: 4
[   59.956900] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   59.956903] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   59.956906] [drm:intel_calculate_wm], FIFO watermark level: -5
[   59.956909] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   59.956912] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   59.956915] [drm:i9xx_update_wm], memory self refresh disabled
[   60.023180] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[   60.023192] [drm:intel_tv_detect_type], Unrecognised TV connection
[   60.055190] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   60.055215] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   60.098175] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   60.098183] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   60.098186] [drm:intel_calculate_wm], FIFO watermark level: 4
[   60.098190] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   60.098193] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[   60.098196] [drm:i9xx_update_wm], self-refresh entries: 80
[   60.098199] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[   60.098203] [drm:i9xx_update_wm], memory self refresh enabled
[   60.098391] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[   60.099497] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   60.099502] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   60.099507] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   60.099511] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[   60.099530] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   60.100038] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   60.100045] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   60.128951] [drm:i9xx_update_plane], Writing base 00410000 00000000 0 0 5120
[   60.128963] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   60.128967] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   60.128970] [drm:intel_calculate_wm], FIFO watermark level: 4
[   60.128973] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   60.128976] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   60.128979] [drm:intel_calculate_wm], FIFO watermark level: -5
[   60.128982] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   60.128985] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   60.128989] [drm:i9xx_update_wm], memory self refresh disabled
[   60.128994] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[   60.144059] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   60.144063] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   60.144066] [drm:intel_calculate_wm], FIFO watermark level: 4
[   60.144069] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   60.144072] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   60.144075] [drm:intel_calculate_wm], FIFO watermark level: -5
[   60.144078] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 1
[   60.144081] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 1, C: 2, SR 1
[   60.144084] [drm:i9xx_update_wm], memory self refresh disabled
[   60.212177] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[   60.212190] [drm:intel_tv_detect_type], Unrecognised TV connection
[   60.228183] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   60.228208] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   60.271193] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   60.271202] [drm:intel_calculate_wm], FIFO entries required for mode: 22
[   60.271205] [drm:intel_calculate_wm], FIFO watermark level: 4
[   60.271208] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   60.271212] [drm:i9xx_update_wm], FIFO watermarks - A: 4, B: 29
[   60.271215] [drm:i9xx_update_wm], self-refresh entries: 80
[   60.271218] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 4, B: 29, C: 2, SR 47
[   60.271222] [drm:i9xx_update_wm], memory self refresh enabled
[   60.271411] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[   60.387835] [drm:drm_mode_addfb], [FB:30]
[   60.387987] [drm:drm_mode_setcrtc], [CRTC:4]
[   60.388027] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[   60.388035] [drm:drm_crtc_helper_set_config], 
[   60.388040] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:30] #connectors=1 (x y) (0 0)
[   60.388063] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   60.402512] [drm:i9xx_update_plane], Writing base 00800000 00000000 0 0 8192
[   61.994352] [drm:intel_crtc_cursor_set], 
[   63.212107] [drm:intel_crt_detect], CRT not detected via hotplug
[   63.214080] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   63.214095] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   63.214103] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   63.214389] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   63.214395] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   63.214403] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   63.214413] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   64.017514] [drm:intel_crtc_cursor_set], 
[   64.017526] [drm:intel_crtc_cursor_set], cursor off
[   64.088765] [drm:drm_crtc_helper_set_config], 
[   64.088771] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   64.088784] [drm:drm_crtc_helper_set_config], 
[   64.088790] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   64.088807] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   64.088820] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[   64.098086] [drm:drm_crtc_helper_set_config], 
[   64.098093] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   64.098110] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   64.098466] [drm:drm_crtc_helper_set_config], 
[   64.098471] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
[   64.098482] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   66.579568] wlan0: authenticate with 28:10:7b:f6:83:80
[   66.579772] wlan0: send auth to 28:10:7b:f6:83:80 (try 1/3)
[   66.581659] wlan0: authenticated
[   66.582665] iwl3945 0000:04:00.0: wlan0: disabling HT as WMM/QoS is not supported
[   66.583320] wlan0: associating with AP with corrupt beacon
[   66.584088] wlan0: associate with 28:10:7b:f6:83:80 (try 1/3)
[   66.587293] wlan0: RX AssocResp from 28:10:7b:f6:83:80 (capab=0xc11 status=0 aid=1)
[   66.590748] wlan0: associated
[   66.590821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   66.590946] cfg80211: Calling CRDA for country: GB
[   66.597344] cfg80211: Regulatory domain changed to country: GB
[   66.597350] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   66.597353] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   66.597356] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   66.597359] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   66.597361] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   73.260062] [drm:intel_crt_detect], CRT not detected via hotplug
[   73.262058] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   73.262069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   73.262076] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   73.262360] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   73.262366] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   73.262374] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   73.262383] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[   83.308163] [drm:intel_crt_detect], CRT not detected via hotplug
[   83.310072] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   83.310087] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   83.310094] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   83.310381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   83.310387] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   83.310395] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[   83.310405] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20121020/0eac77a7/attachment-0001.pgp>


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux