Now that we enable the cpu edp pll in intel_dp->pre_enable and no
longer in crtc_mode_set, we can also move the modeset part to the
intel_dp->mode_set callback. Previously this was not possible because
the encoder ->mode_set callbacks are called after the crtc mode set
callback.
v2: Rebase on top of copy&pasted hsw crtc_mode_set.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 40 ------------------------------------
drivers/gpu/drm/i915/intel_dp.c | 40 ++++++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index fecaabc..0c44421 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2293,43 +2293,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return 0;
}
-static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl &= ~DP_PLL_FREQ_MASK;
-
- if (clock < 200000) {
- u32 temp;
- dpa_ctl |= DP_PLL_FREQ_160MHZ;
- /* workaround for 160Mhz:
- 1) program 0x4600c bits 15:0 = 0x8124
- 2) program 0x46010 bit 0 = 1
- 3) program 0x46034 bit 24 = 1
- 4) program 0x64000 bit 14 = 1
- */
- temp = I915_READ(0x4600c);
- temp &= 0xffff0000;
- I915_WRITE(0x4600c, temp | 0x8124);
-
- temp = I915_READ(0x46010);
- I915_WRITE(0x46010, temp | 1);
-
- temp = I915_READ(0x46034);
- I915_WRITE(0x46034, temp | (1 << 24));
- } else {
- dpa_ctl |= DP_PLL_FREQ_270MHZ;
- }
- I915_WRITE(DP_A, dpa_ctl);
-
- POSTING_READ(DP_A);
- udelay(500);
-}
-
static void intel_fdi_normal_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -5429,9 +5392,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
- if (is_cpu_edp)
- ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
ironlake_set_pipeconf(crtc, adjusted_mode, dither);
intel_wait_for_vblank(dev, pipe);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d76258d..dc019af 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -851,6 +851,43 @@ void intel_dp_init_link_config(struct intel_dp *intel_dp)
}
}
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ u32 temp;
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ /* workaround for 160Mhz:
+ 1) program 0x4600c bits 15:0 = 0x8124
+ 2) program 0x46010 bit 0 = 1
+ 3) program 0x46034 bit 24 = 1
+ 4) program 0x64000 bit 14 = 1
+ */
+ temp = I915_READ(0x4600c);
+ temp &= 0xffff0000;
+ I915_WRITE(0x4600c, temp | 0x8124);
+
+ temp = I915_READ(0x46010);
+ I915_WRITE(0x46010, temp | 1);
+
+ temp = I915_READ(0x46034);
+ I915_WRITE(0x46034, temp | (1 << 24));
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+ I915_WRITE(DP_A, dpa_ctl);
+
+ POSTING_READ(DP_A);
+ udelay(500);
+}
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -950,6 +987,9 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
+
+ if (is_cpu_edp(intel_dp))
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
--
1.7.11.7
