Contrary to the other clock gating w/a in GEN6_UCGCTL1, this one is actually documented in Bspec, vol1g "GT Interface Registers [SNB]", Section 1.5.1 "UCGCTL1 - Unit Level Clock Gating Control 1". Supposedly this can prevent hangs on the media ring. Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch> --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 233dbd5..7e0a2b5 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3729,6 +3729,7 @@ #define GEN6_UCGCTL1 0x9400 # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) +# define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) #define GEN6_UCGCTL2 0x9404 # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aa0c6df..2134996 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8512,7 +8512,8 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | - GEN6_BLBUNIT_CLOCK_GATE_DISABLE); + GEN6_BLBUNIT_CLOCK_GATE_DISABLE | + GEN6_CSUNIT_CLOCK_GATE_DISABLE); /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock * gating disable must be set. Failure to set it results in -- 1.7.7.6
