Re: [PATCH 2/5] drm/i915: Rename HSW/BDW PLL bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 04-06-2019 om 22:09 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Give the PLL control register bits better names on HSW/BDW.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h       | 37 ++++++++++++++++++---------
>  drivers/gpu/drm/i915/intel_ddi.c      | 16 ++++++------
>  drivers/gpu/drm/i915/intel_display.c  |  8 +++---
>  drivers/gpu/drm/i915/intel_dpll_mgr.c |  4 +--
>  4 files changed, 39 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index d5fee72fc079..b7dd42bfffaa 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9465,24 +9465,33 @@ enum skl_power_gate {
>  /* SPLL */
>  #define SPLL_CTL			_MMIO(0x46020)
>  #define  SPLL_PLL_ENABLE		(1 << 31)
> -#define  SPLL_PLL_SSC			(1 << 28)
> -#define  SPLL_PLL_NON_SSC		(2 << 28)
> -#define  SPLL_PLL_LCPLL			(3 << 28)
> -#define  SPLL_PLL_REF_MASK		(3 << 28)
> -#define  SPLL_PLL_FREQ_810MHz		(0 << 26)
> -#define  SPLL_PLL_FREQ_1350MHz		(1 << 26)
> -#define  SPLL_PLL_FREQ_2700MHz		(2 << 26)
> -#define  SPLL_PLL_FREQ_MASK		(3 << 26)
> +#define  SPLL_REF_BCLK			(0 << 28)
> +#define  SPLL_REF_MUXED_SSC		(1 << 28) /* CPU SSC if fused enabled, PCH SSC otherwise */
> +#define  SPLL_REF_NON_SSC_HSW		(2 << 28)
> +#define  SPLL_REF_PCH_SSC_BDW		(2 << 28)
> +#define  SPLL_REF_LCPLL			(3 << 28)
> +#define  SPLL_REF_MASK			(3 << 28)
> +#define  SPLL_REF_BCLK			(0 << 28)
> +#define  SPLL_REF_SSC			(1 << 28)
> +#define  SPLL_REF_NON_SSC		(2 << 28)
> +#define  SPLL_REF_LCPLL			(3 << 28)

? Bit unclear or double definitions, at least of SPLL_REF_MASK.


> +#define  SPLL_REF_MASK			(3 << 28)
> +#define  SPLL_FREQ_810MHz		(0 << 26)
> +#define  SPLL_FREQ_1350MHz		(1 << 26)
> +#define  SPLL_FREQ_2700MHz		(2 << 26)
> +#define  SPLL_FREQ_MASK			(3 << 26)
>  
>  /* WRPLL */
>  #define _WRPLL_CTL1			0x46040
>  #define _WRPLL_CTL2			0x46060
>  #define WRPLL_CTL(pll)			_MMIO_PIPE(pll, _WRPLL_CTL1, _WRPLL_CTL2)
>  #define  WRPLL_PLL_ENABLE		(1 << 31)
> -#define  WRPLL_PLL_SSC			(1 << 28)
> -#define  WRPLL_PLL_NON_SSC		(2 << 28)
> -#define  WRPLL_PLL_LCPLL		(3 << 28)
> -#define  WRPLL_PLL_REF_MASK		(3 << 28)
> +#define  WRPLL_REF_BCLK			(0 << 28)
> +#define  WRPLL_REF_PCH_SSC		(1 << 28)
> +#define  WRPLL_REF_MUXED_SSC_BDW	(2 << 28) /* CPU SSC if fused enabled, PCH SSC otherwise */
> +#define  WRPLL_REF_SPECIAL_HSW		(2 << 28) /* muxed SSC (ULT), non-SSC (non-ULT) */
> +#define  WRPLL_REF_LCPLL		(3 << 28)
> +#define  WRPLL_REF_MASK			(3 << 28)
>  /* WRPLL divider programming */
>  #define  WRPLL_DIVIDER_REFERENCE(x)	((x) << 0)
>  #define  WRPLL_DIVIDER_REF_MASK		(0xff)
> @@ -9548,6 +9557,10 @@ enum skl_power_gate {
>  #define LCPLL_CTL			_MMIO(0x130040)
>  #define  LCPLL_PLL_DISABLE		(1 << 31)
>  #define  LCPLL_PLL_LOCK			(1 << 30)
> +#define  LCPLL_REF_NON_SSC		(0 << 28)
> +#define  LCPLL_REF_BCLK			(2 << 28)
> +#define  LCPLL_REF_PCH_SSC		(3 << 28)
> +#define  LCPLL_REF_MASK			(3 << 28)
>  #define  LCPLL_CLK_FREQ_MASK		(3 << 26)
>  #define  LCPLL_CLK_FREQ_450		(0 << 26)
>  #define  LCPLL_CLK_FREQ_54O_BDW		(1 << 26)
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 350eaf54f01f..183f91abda19 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1231,9 +1231,9 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
>  	u32 wrpll;
>  
>  	wrpll = I915_READ(reg);
> -	switch (wrpll & WRPLL_PLL_REF_MASK) {
> -	case WRPLL_PLL_SSC:
> -	case WRPLL_PLL_NON_SSC:
> +	switch (wrpll & WRPLL_REF_MASK) {
> +	case WRPLL_REF_SPECIAL_HSW:
> +	case WRPLL_REF_PCH_SSC:
>  		/*
>  		 * We could calculate spread here, but our checking
>  		 * code only cares about 5% accuracy, and spread is a max of
> @@ -1241,7 +1241,7 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
>  		 */
>  		refclk = 135;
>  		break;
> -	case WRPLL_PLL_LCPLL:
> +	case WRPLL_REF_LCPLL:
>  		refclk = LC_FREQ;
>  		break;
>  	default:
> @@ -1613,12 +1613,12 @@ static void hsw_ddi_clock_get(struct intel_encoder *encoder,
>  		link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1));
>  		break;
>  	case PORT_CLK_SEL_SPLL:
> -		pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK;
> -		if (pll == SPLL_PLL_FREQ_810MHz)
> +		pll = I915_READ(SPLL_CTL) & SPLL_FREQ_MASK;
> +		if (pll == SPLL_FREQ_810MHz)
>  			link_clock = 81000;
> -		else if (pll == SPLL_PLL_FREQ_1350MHz)
> +		else if (pll == SPLL_FREQ_1350MHz)
>  			link_clock = 135000;
> -		else if (pll == SPLL_PLL_FREQ_2700MHz)
> +		else if (pll == SPLL_FREQ_2700MHz)
>  			link_clock = 270000;
>  		else {
>  			WARN(1, "bad spll freq\n");
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 75ca2030ffb0..393b19e53ba3 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9129,12 +9129,12 @@ static bool spll_uses_pch_ssc(struct drm_i915_private *dev_priv)
>  	if ((ctl & SPLL_PLL_ENABLE) == 0)
>  		return false;
>  
> -	if ((ctl & SPLL_PLL_REF_MASK) == SPLL_PLL_SSC &&
> +	if ((ctl & SPLL_REF_MASK) == SPLL_REF_MUXED_SSC &&
>  	    (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
>  		return true;
>  
>  	if (IS_BROADWELL(dev_priv) &&
> -	    (ctl & SPLL_PLL_REF_MASK) == SPLL_PLL_NON_SSC)
> +	    (ctl & SPLL_REF_MASK) == SPLL_REF_PCH_SSC_BDW)
>  		return true;
>  
>  	return false;
> @@ -9149,11 +9149,11 @@ static bool wrpll_uses_pch_ssc(struct drm_i915_private *dev_priv,
>  	if ((ctl & WRPLL_PLL_ENABLE) == 0)
>  		return false;
>  
> -	if ((ctl & WRPLL_PLL_REF_MASK) == WRPLL_PLL_SSC)
> +	if ((ctl & WRPLL_REF_MASK) == WRPLL_REF_PCH_SSC)
>  		return true;
>  
>  	if ((IS_BROADWELL(dev_priv) || IS_HSW_ULT(dev_priv)) &&
> -	    (ctl & WRPLL_PLL_REF_MASK) == WRPLL_PLL_NON_SSC &&
> +	    (ctl & WRPLL_REF_MASK) == WRPLL_REF_MUXED_SSC_BDW &&
>  	    (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
>  		return true;
>  
> diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> index 69787f259677..2d4e7b9a7b9d 100644
> --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> @@ -775,7 +775,7 @@ static struct intel_shared_dpll *hsw_ddi_hdmi_get_dpll(struct intel_crtc_state *
>  
>  	hsw_ddi_calculate_wrpll(crtc_state->port_clock * 1000, &r2, &n2, &p);
>  
> -	val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL |
> +	val = WRPLL_PLL_ENABLE | WRPLL_REF_LCPLL |
>  	      WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
>  	      WRPLL_DIVIDER_POST(p);
>  
> @@ -839,7 +839,7 @@ hsw_get_dpll(struct intel_crtc_state *crtc_state,
>  			return NULL;
>  
>  		crtc_state->dpll_hw_state.spll =
> -			SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
> +			SPLL_PLL_ENABLE | SPLL_FREQ_1350MHz | SPLL_REF_MUXED_SSC;
>  
>  		pll = intel_find_shared_dpll(crtc_state,
>  					     DPLL_ID_SPLL, DPLL_ID_SPLL);


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux